Digisol DG-HR1400 User manual

N
V4.2
2016-11-24

Trademarks:
TM
DIGISOL is a trademark of Digisol Systems Ltd. All other trademarks
are the property of the respective manufacturers.
Copyright
::
Copyright © 2016 by Digisol Systems Ltd. All rights reserved. No part of
this publication may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language or computer language, in
any form or by any means, electronic, mechanical, magnetic, optical,
chemical, manual or otherwise, without the prior written permission of
this company.
This company makes no representations or warranties, either expressed
or implied, with respect to the contents hereof and specifically disclaims
any warranties, merchantability or fitness for any particular purpose. Any
software described in this manual is sold or licensed "as is". Should the
programs prove defective following their purchase, the buyer (and not this
company, its distributor, or its dealer) assumes the entire cost of all
necessary servicing, repair and any incidental or consequential damages
resulting from any defect in the software. Further, this company reserves
the right to revise this publication and to make changes from time to time
in the contents thereof without obligation to notify any person of such
revision or changes.
2

LED Name LED Status Indication
Power
(PWR) On Router is switched on and correctly powered.
On WAN port is connected.
Off WAN port is not connected.
WAN
Blinking WAN activity (transferring or receiving
data).
On LAN port is connected.
Off LAN port is not connected.
LAN(1-4)
Blinking LAN activity (transferring or receiving
data).
On Wireless network is switched on.
Off Wireless network is switched off.
WLAN
Blinking Wireless LAN activity (transferring or
receiving data).
On A wireless device has been successfully
added to the network by WPS function.
Off WPS process is not initiated.
WPS
Blinking A wireless device is connecting to the
network by WPS function.

Interfaces Description
Antenna This antenna is a 5dBi dipole antenna.
LAN (1 - 4) Local Area Network (LAN) ports 1 to 4.
WAN Wide Area Network (WAN / Internet) port.

Interfaces Description
Power on/off
button
Press this button to power ON/OFF the router.
Reset Reset the router to factory default settings (clear all settings).
Press this button and hold for 5 seconds to restore all settings to
factory defaults.
WPS/WIFI The WPS/WIFI button has two functions.
WPS: Press this button for more than 10 seconds to initiate WPS.
WIFI: Press this button for less than 5 seconds to enable WLAN.
Power
Connector
The Power socket is where you will connect the power adapter.
Please use the power adapter provided with this Wireless Router.