Digisol DG-HR1400 User manual

HOW TO CONFIGURE YOUR DG-HR1400 FOR INTERNET ACCESS
STEP 1: ACCESSING THE WEB CONFIGURATION PAGE INSIDE THE ROUTER
Open the configuration page of the router by typing http://192.168.2.1 in a web browser. We
recommend this one time configuration to be done using Internet Explorer.
Enter the username as admin and password as 1234 and click on Login

STEP 2: CONFIGURE THE ROUTER IN PPPOE MODE
Click on Setup > Internet Setup
Under WAN Interface > Select WAN Access Type as PPPoE
Enter Username and Password provided by the ISP

Under MAC Clone > Select MAC From PC
Click on Apply Changes

STEP 3: CHECKING INTERNET ACCESS
Click Status > Device Info > If you are successfully connected to the internet, you will get numbers
like 114.35.54.56 etc .Under WAN Configuration > Inside the IP Address and Gateway sections.
Now verify the internet access through DG-HR1400 router.