Digisol DG-WA7910P User manual

DG-WA7910P
User Manual
V1.0
2019-01-14
As our products undergo continuous development the specifications are subject to change without prior notice

DG-WA7910P User Manual
1
COPYRIGHT
Copyright 2019 by Digisol Systems Ltd. All rights reserved.
Company has an ongoing policy of upgrading its products and it may be possible that
information in this document is not up-to-date.
Please check with your local distributors for latest information. No part of this document can
be copied or reproduced in any form without written consent from the company.
Trademark
DIGISOL TM is a trademark of Digisol Systems Ltd. All other trademarks are the property of
the respective manufacturers.

DG-WA7910P User Manual
2
INDEX
1. Hardware and Operation Mode Instruction……………........………………….....……………………………..3
1.1. LED Interface…………….………………………………………………………………………………………………3
1.2. AP Interface:……………………………………….......…………………………….……………………………..…4
1.3. Power Supply:……………………………………………………….......………………………….…………………4
1.3.1. PoE Adapter Power Supply:…………………………………….....………………...………………...4
1.3.2. PoE Switch Power Supply…………………………...................................………...………....5
2. Connect Wireless AP with PC:……………….………………………………………..…..…………………………………….…7
3. Login………………………………………………………………………........………………………………………….…………..8
4. WEB GUI interface Setting:……………………..........………………………………………………………………………...10
4.1. Home……………………………………………….….....…………………………………………………………..….10
4.2. Wizard Configuration:…………………………….…………………….......…………….…………………….12
4.2.1. Gateway Mode:…………………………….…………………………….....………………………………...12
4.2.2. WiFi Repeater mode……………………….…………………………………….....………………….14
4.2.3. WISP Operation mode:…………………….……………………………….....…….……………………..16
4.2.4. AP Operation mode:……………………………………………………………....…………………….19
4.3. WiFi Setting:………………..........…………………………………….…………...……………………………….21
4.4. Network Setting:……………………………………………………………………………………………………..24
4.5. Manage:....................……………………………………………………………………….……………………...25
5. Share Internet and Obtain IP address automatically…………………………….….……..………………………...28
Trouble Shooting………………………………………………………………………………….……………………………………....29

DG-WA7910P User Manual
3
1. Hardware and Operation Mode Instruction
Package Contents
Before using this access point, please check if there is anything missing in the package, and
contact your dealer of purchase to claim for missing items:
DG-WA7910P Outdoor Access Point
DC 12V Power Adapter
Patch Cord
User Manual CD
Mounting Brackets
1.1. LED Indicator
SYS: Power Indicator
2G: 2.4G Wireless
5G: 5.8G Wireless

DG-WA7910P User Manual
4
1.2. AP Interface
RST
Reset Button, it make AP revert to default settings after pressing it for 15 seconds
WAN
WAN Port, connect with ADSL modem or Internet mainly. It will be LAN port under
Wireless AP and WiFi Repeater operation mode
LAN
LAN Port to end users
LED
LED Indicator for WAN port and LAN port
DC
DC power connector
1.3. Power Supply
1.3.1 PoE Adapter Power Supply:
The connection diagram shown as P1, internet cable connect to PoE adapter’s LAN Port,
outdoor AP WAN port connect to PoE adapter’s PoE Port, then PC will access into AP through
cable or wireless.
The wireless AP support 48V IEEE802.3at PoE, so PoE adapter should be 48V IEEE802.3at PoE
standard.
P1

DG-WA7910P User Manual
5
1.3.2. PoE Switch Power Supply
The connection diagram shown as P2, Internet cable from PoE Switch to AP’s WAN Port, then
PC access into AP via wired/wireless.
Pls note the wireless AP support 48V IEEE802.3at PoE, the PoE switch should comply with 48V
IEEE802.3at PoE standard.
P2
Operation Mode:
There are three operation mode on this wireless AP:
P3

DG-WA7910P User Manual
6
P4
P5

DG-WA7910P User Manual
7
2. Connect Wireless AP with PC
Connect the PC with wireless AP by Wireless SSID or LAN cable:
The diagram of wireless connection showed as follow:
Pls note: the default SSID is DG-WA7910P-2.4G/5.8G, SSID’s are open with no password.
P6. Connecting the PC to the AP with wireless
P7: Connecting the PC to the AP with wired LAN

DG-WA7910P User Manual
8
3. Login
1. Connect the Outdoor AP with computer by wired or wireless
2. The default IP address of this wireless AP is 192.168.1.200. Configure the PC’s local
connection. IP address as 192.168.1.X (X is number from 2 to 254), subnet mask is
255.255.255.0.
P8
P9

DG-WA7910P User Manual
9
3. Input 192.168.1.200 into browser, login page will appear, the default login password:
admin.
P10: Login Page

DG-WA7910P User Manual
10
4. WEB GUI interface Setting
4.1. Home
After login, the home page will be shown as below
P11: Home
This page will show the device default operation mode, Device Information, Device Description,
LAN Information, 2G WiFi, Flow (2G WiFi) bps and Hardware/Firmware version.
In this wireless AP, the default operation mode is AP mode.
In Device Information you can find the CPU and Memory Usage of the AP as shown in P12
P12: Device Information
In Device Description you can add the APs description by clicking on Click Settings as shown in
P13

DG-WA7910P User Manual
11
P13 Device Description
In LAN Information you can find the IP Mode, IP and MAC Address of the AP as shown in P14
P14 Lan Information
In WiFi Information you can find the Status, SSID, Channel, Encryption and MAC Address of AP
as shown in P15
P15 WiFi Information
In Flow (2G Wifi) bps you can find the AP’s Upstream and Downstream as shown in P16
P16 Flow (2G Wifi) bps

DG-WA7910P User Manual
12
4.2. Wizard Configuration
Wizard: It instruct users to configure wireless AP operation mode based on needs, there are
four operation mode including Gateway, Repeater, WISP, Wireless AP. Please confirm the
operation mode first before starting the configuration.
Clicking Wizard in Status page will pop up following page to configure the operation mode and
there is explanation for each operation mode for better application.
P17 Wizard Configuration
4.2.1 Gateway Mode
Before Clicking the Gateway mode, confirm your internet will be Static IP, PPPoE, or DHCP.
Then clicking on the Gateway mode will pop up the below image. Please choose the right WAN
setting mode, then click next to continue. Then configure the wireless parameters and click
next.
P18 WAN Setting in Gateway Mode

DG-WA7910P User Manual
13
P19 2G Wireless Setting in Gateway Mode
P20 5G Wireless Setting in Gateway Mode
Clicking next will complete the Gateway mode setting and show following picture:
Please Note: The equipment will restart automatically for the changes to take effect.

DG-WA7910P User Manual
14
P21 Settings Complete in Gateway Mode
When return to Home page, will show Wireless router’s SSID, Internet connection, LAN
connection status shown as below.
P22 Status in Gateway Mode
4.2.2. WiFi Repeater mode
1. Login the Web management page, click “Wizard” then “WiFi Repeater”
2. Scan AP and select the AP’s SSID you want to bridge then input the AP’s key, click next to
complete.

DG-WA7910P User Manual
15
P23 Repeater Mode
3. Click next to configure the Wireless Setting as follows, then click next to finish.
P24 2G Wireless Setting in Repeater Mode
P25 5G Wireless Setting in Repeater Mode

DG-WA7910P User Manual
16
4. Click Return button, will back to Status, show Repeater mode data, will show fail or success,
and user can configure this data in this page if required.
Please Note: The equipment will restart for the changes to take effect.
P26 Settings Complete in Repeater Mode
P27 Status in Repeater Mode
4.2.3. WISP Operation mode
Click WISP operation mode in Wizard, then will pop up the configure page, please set the WISP
operation mode based on the steps shown in picture:

DG-WA7910P User Manual
17
P28 WISP Mode
Select the correct WAN setting and configure appropriate wireless SSID in WISP operation
mode, then next to complete.
P29 WAN Setting in WISP Mode
Configure the Wireless Data as shown below
P30 2G Wireless Setting in WISP Mode

DG-WA7910P User Manual
18
P31 5G Wireless Setting in WISP Mode
Please Note: The equipment will restart for the changes to take effect.
Click on next to complete the wizard and back to Home, it will show connection fail or success,
then you can configure the data based on request:
P32 Settings Complete in Repeater Mode

DG-WA7910P User Manual
19
P33 Status in WISP Mode
4.2.4. AP Operation mode
Set the wireless data, AP Location info as required, then click next to continue and enter into
LAN setting.
After LAN setting, complete the AP mode configuration and back to Status:
P34 LAN Setting in AP Mode