Digisol DG-WM6305SIE2 User manual

1
DG-WM6305SIE2
User Manual
V1.0
2019-01-17
As our products undergo continuous development the specifications are subject to change without prior notice.

DG-WM6305SIE2 User Manual
2
COPYRIGHT
Copyright 2019 by Digisol Systems Ltd. All rights reserved.
Company has an ongoing policy of upgrading its products and it may be possible that information
in this document is not up-to-date.
Please check with your local distributors for latest information. No part of this document can be
copied or reproduced in any form without written consent from the company.
Trademark
DIGISOL TM is a trademark of Digisol Systems Ltd. All other trademarks are the property of the
respective manufacturers.

DG-WM6305SIE2 User Manual
3
INDEX
1. Hardware and Operation Mode Instruction……………........…………………….......………………………………4
1.1. LED indicator:………………………………………….......………………………………………………………..…….4
1.2. AP Interface:……………………………………………………….......………………………………………………..…4
1.3. Power Supply:…………………………………………………………….......……………………………………………5
1.3.1. PoE Adapter Power Supply:…………………………………….......…………………...………………...5
1.3.2. PoE Switch Power Supply…………………………...................................………........………....5
1.4. AP installation:............................................................................................................….....6
2. Connect Wireless AP with PC:………………………………………………….......…..………………………………………7
3. Login………………………………………………………………………........………………………………………………………….8
4. WEB GUI interface Setting:……………………........…………………………………………………………………………10
4.1. Home……………………………………………….......………………………………………………………………..…10
4.2. Wizard Configuration:………………………………………………….......…………….………………………….12
4.2.1. Gateway Mode:………………………………………………………….....………………………………...12
4.2.2. WiFi Repeater mode…………………………………………………………….....……………………….14
4.2.3. WISP Operation mode:…………………………………………………….....…….……………………..16
4.2.4. AP Operation mode:……………………………………………………………....…………………………18
4.3. WiFi:………….…………………………………………………….…………...……………………….…………………….20
4.4. Network:……………….…..…………………………………………………………………………………………………23
4.5. Manage:………………..…………………………………………………………………………….….…………………...24
5. Share Internet and Obtain IP address automatically……..……………………….….……..……………………….27
Trouble Shooting……………………………………………………….………………………….……………………………………...28

DG-WM6305SIE2 User Manual
4
1. Hardware and Operation Mode Instruction
Package Contents
Before using this access point, please check if there is anything missing in the package, and
contact your dealer of purchase to claim for missing items:
DG-WM6305SIE2 Ceiling Mount Access Point
DC 12V Power Adapter
Patch Cord
Installation Guide
User Manual CD
Mounting Screws
1.1. LED Indicator
Green:- Power Indicator
Blue:- WiFi Indicator
1.2. AP Interface
RST
Reset Button, it make AP revert to default settings after pressing it for 15 seconds.
WAN
WAN Port, connect with ADSL modem or Internet mainly. It will be LAN port under
Wireless AP and WiFi Repeater operation mode
LAN
LAN Port to end users
LED
LED Indicator for WAN port and LAN port
DC
DC power connector

DG-WM6305SIE2 User Manual
5
1.3. Power Supply
1.3.1 PoE Adapter Power Supply:
The connection diagram shown as P1, internet cable connect to PoE adapter’s LAN Port, Ceiling
AP’s WAN port connect to PoE adapter’s PoE Port, then PC will access into ceiling AP through cable
or wireless.
The wireless AP support 48V IEEE802.3af PoE, so PoE adapter should be 48V IEEE802.3af PoE
standard.
P1
1.3.2. PoE Switch Power Supply
The connection diagram shown as P2, Internet cable from PoE Switch to Ceiling AP’s WAN Port,
then PC access into ceiling AP via wired/wireless.
Pls note the wireless AP support 48V IEEE802.3af PoE, the PoE switch should comply with 48V
IEEE802.3af PoE standard.
P2

DG-WM6305SIE2 User Manual
6
1.4. AP Installation
For the Ceiling Wireless AP, will be installed under ceiling based on following steps:

DG-WM6305SIE2 User Manual
7
2. Connect Wireless AP with PC
You can connect the PC with wireless AP by Wireless SSID and LAN cable:
The diagram of wireless connection showed as follow:
Pls note: the default SSID is DG-WM6305SIE2, SSID’s password is blank
P3. Connect the PC to AP using WiFi as shown above
P4. Connect the PC to AP using LAN cable as shown above

DG-WM6305SIE2 User Manual
8
3. Login
1. Connect the Ceiling AP with computer by wired or wireless
2. The default IP address of this wireless AP is 192.168.1.200. Configure the PC’s local connection
IP address as 192.168.1.X (X is number from 2 to 254), subnet mask is 255.255.255.0.
P5
P6

DG-WM6305SIE2 User Manual
9
3. Input 192.168.1.200 into browser, login page will appear, the default login password: admin.
P7: Login Page

DG-WM6305SIE2 User Manual
10
4. WEB GUI interface Setting
4.1. Home
After login, the Device Status and home page will be showed
P8: Home
This page will show the device default operation mode, Device Information, Device Description,
LAN Information, 2G WiFi, Flow (2G WiFi) bps and Hardware/Firmware version.
In this wireless AP, the default operation mode is AP mode.
In Device Information you can find the CPU and Memory Usage of the AP as shown in P9
P9: Device Information
In Device Description you can add the APs description by clicking on Click Settings as shown in
P10

DG-WM6305SIE2 User Manual
11
P10: Device Description
In LAN Information you can find the IP Mode, IP and MAC Address of the AP as shown in P11
P11: Lan Information
In WiFi Information you can find the Status, SSID, Channel, Encryption and MAC Address of AP as
shown in P12
P12: WiFi Information
In Flow (2G Wifi) bps you can find the AP’s Upstream and Downstream as shown in P13
P13: Flow (2G Wifi) bps

DG-WM6305SIE2 User Manual
12
4.2. Wizard Configuration
Wizard: It instruct users to configure wireless AP’s operation mode based on needs, there are four
operation mode including Gateway, Repeater, WISP, Wireless AP. Please confirm the operation
mode first before starting the configuration.
Clicking Wizard in Status page will pop up following page to configure the operation mode and
there are explanation for each operation mode for better application.
P14: Wizard Configuration
4.2.1 Gateway Mode
Before Clicking the Gateway mode, confirm your internet will be Static IP, PPPoE, or DHCP.
Then clicking on the Gateway mode will pop up the below image. Please choose the right WAN
setting mode, then click next to continue. Then configure the wireless parameters and click next.
P15: WAN setting in Gateway Mode

DG-WM6305SIE2 User Manual
13
P16: 2G Wireless setting in Gateway mode
P17: 5G Wireless setting in Gateway mode
Clicking next will complete the Gateway mode setting and show following picture:
Please Note: The equipment will restart for the changes to take effect.
P18: Settings complete in Gateway mode

DG-WM6305SIE2 User Manual
14
When return to Home page, will show Wireless router’s SSID, Internet connection, LAN connection
status shown as below.
P19: Status in Gateway mode
4.2.2. WiFi Repeater mode
1. Login the Web management page, click “Wizard” then “WiFi Repeater”
2. Scan AP and select the AP’s SSID want to bridge then input the AP’s key, click next to complete.
P20: Repeater mode

DG-WM6305SIE2 User Manual
15
P21: 2G Wireless Setting in Repeater mode
P22: 5G Wireless Setting in Repeater mode
Clicking next will complete the Gateway mode setting and show following picture:
Please Note: The equipment will restart for the changes to take effect.
When return to Home page, it shows Repeater mode data, will show fail or success, and user can
configure this data if required.

DG-WM6305SIE2 User Manual
16
P23: Status in Repeater mode
4.2.3. WISP Operation mode
Click WISP operation mode in Wizard, then will pop up the configure page, please set the WISP
operation mode based on the steps shown in picture:
P24: WISP Mode
Select the appropriate wireless AP and configure the correct WAN setting in WISP operation mode,
then next to complete.

DG-WM6305SIE2 User Manual
17
P25: WAN setting in WISP mode
In next step configure the SSID then complete and back to home, will show the connection fail or
success, where you can configure the data based on request:
Please Note: The equipment will restart for the changes to take effect.
P26: 2G Wireless setting in WISP mode

DG-WM6305SIE2 User Manual
18
P27: 5G Wireless setting in WISP mode
P28: Status in WISP mode
4.2.4. AP Operation mode
Configure the LAN setting and in the next tab set the wireless SSID, follow the screenshot below:

DG-WM6305SIE2 User Manual
19
P29: LAN setting in AP mode
P30: 2G Wireless setting in AP mode
P31: 5G Wireless setting in AP mode

DG-WM6305SIE2 User Manual
20
Clicking next will complete the AP mode setting and show following picture:
Please Note: The equipment will restart for the changes to take effect.
P32: Status in AP mode
4.3. WiFi Setting
In WiFi setting you can set the 2.4G and 5G SSID, MAC ACL, Wifi Timer off and Advanced settings.
Let’s see more in detail in the following pages:
2G Wifi
In this part, will show the 2.4G Basic Setting and Virtual AP setting as shown below
P33: 2G WiFi setting