Digital Projection E-Vision 6800 3D Series User manual

Rev A January 2015
E-Vision 6800 3D Series
High Brightness Digital Video Projector
4INSTALLATION AND QUICK-START GUIDE
4CONNECTION GUIDE
4OPERATING GUIDE
4REMOTE COMMUNICATIONS GUIDE
116-281A
LENS SHIFT
ZOOM
–
FOCUS
+
MENU
ENTER RETURN
SOURCE
POWER WARNING LAMP1 LAMP2
AUTO

page i
Digital Projection E-Vision 6800 3D Series
Rev A January 2015
About This Document
Please follow the instructions in this manual carefully to ensure safe and long-lasting use of the projector.
Keep this manual handy for future reference.
Symbols used in this manual
Many pages in this document have a dedicated area for notes. The information in that area is accompanied by the following symbols:
ELECTRICAL WARNING: this symbol indicates that there is a danger of electrical shock unless the instructions are closely
followed.
WARNING: this symbol indicates that there is a danger of physical injury to yourself and/or damage to the equipment unless
the instructions are closely followed.
NOTE: this symbol indicates that there is some important information that you should read.
Product revision
Because we at Digital Projection continually strive to improve our products, we may change specications and designs, and add new features
without prior notice.
Legal notice
Trademarks and trade names mentioned in this document remain the property of their respective owners.
Digital Projection disclaims any proprietary interest in trademarks and trade names other than its own.
Copyright © 2015 Digital Projection Ltd. All rights reserved.
Notes

page ii
Digital Projection E-Vision 6800 3D Series
Rev A January 2015
Introduction
Congratulations on your purchase of this Digital Projection product.
Your projector has the following key features:
• Support for most 3D formats.
• HDBaseT® for transmission of uncompressed High Denition Video up to 100 m from the source.
• Swappable color wheels for high brightness and color critical applications.
• BrilliantColor™ for increased system brightness.
• DynamicBlack™ for improved black levels in dark scenes.
• Independent control of hue, saturation and gain for primary and secondary colors.
• Vertical and horizontal keystone correction.
• Control via LAN and RS232.
• Motorized lens mount.
A serial number is located on the product label. Please record it here:
Notes

page iii
Digital Projection E-Vision 6800 3D Series
Rev A January 2015
CONTENTS
INSTALLATION AND QUICK-START GUIDE ..............................1
GETTING TO KNOW THE PROJECTOR.......................................... 3
Front and rear views ............................................................................. 3
Remote control...................................................................................... 3
Control panel and indicators ................................................................. 4
CHANGING THE LENS, LAMPS AND COLOR WHEEL.................... 5
Removing the lens ................................................................................ 5
Fitting the lens....................................................................................... 5
Changing the lamp................................................................................ 6
Changing the color wheel...................................................................... 7
POSITIONING THE SCREEN AND PROJECTOR............................. 8
OPERATING THE PROJECTOR...................................................... 9
Switching the projector on..................................................................... 9
Selecting an input signal or test pattern................................................ 9
Input signal .......................................................................................... 9
Test pattern .......................................................................................... 9
Adjusting the lens................................................................................ 10
Zoom................................................................................................ 10
Focus ............................................................................................... 10
Shift ................................................................................................. 10
Adjusting the image............................................................................. 10
Orientation ......................................................................................... 10
Aspect ratio........................................................................................ 10
Picture .............................................................................................. 10
Switching the projector off................................................................... 11
CONNECTION GUIDE ............................................................................13
SIGNAL INPUTS AND OUTPUTS.................................................. 15
SUPPORTED SIGNAL INPUT MODES .......................................... 16
2D input modes................................................................................... 16
3D input modes................................................................................... 18
CONTROL CONNECTIONS........................................................... 20
OPERATING GUIDE ................................................................................21
USING THE REMOTE CONTROL.................................................. 23
USING THE PROJECTOR............................................................. 25
Main menu .......................................................................................... 25
Lens menu .......................................................................................... 26
Image menu ........................................................................................ 27
Image Mode ....................................................................................... 27
Brightness and Contrast ........................................................................ 27
Gamma............................................................................................. 28
Dynamic Black .................................................................................... 28
Saturation, Hue, Sharpness and Noise Reduction ........................................ 28
Position and Phase .............................................................................. 29
Resync ............................................................................................. 29
Color menu.......................................................................................... 30
Color Space ....................................................................................... 30
Color Temperature ............................................................................... 31
Trim ................................................................................................. 32
Hue / Saturation / Gain.......................................................................... 32

page iv
Digital Projection E-Vision 6800 3D Series
Rev A January 2015
Geometry menu .................................................................................. 33
Aspect Ratio....................................................................................... 33
H Keystone and V Keystone ................................................................... 34
Overscan........................................................................................... 36
3D menu.............................................................................................. 37
The 3D Swap setting explained ............................................................... 37
3D types............................................................................................ 38
Frame rate multiplication in 3D images ...................................................... 39
Lamps menu ....................................................................................... 40
Setup menu......................................................................................... 41
Network ............................................................................................ 42
RS232 .............................................................................................. 42
Security............................................................................................. 43
Filter................................................................................................. 43
System ............................................................................................. 44
Information menu ................................................................................ 45
Source information............................................................................... 45
MENU MAP .................................................................................. 46
REMOTE COMMUNICATIONS GUIDE ..........................................49
INTRODUCTION........................................................................... 51
Network setup ..................................................................................... 51
Serial Port setup.................................................................................. 51
Protocol commands ............................................................................ 52
Examples .......................................................................................... 52
Responses......................................................................................... 52
COMMAND GUIDE ....................................................................... 53
Inputs .................................................................................................. 53
Test Patterns ....................................................................................... 53
Lens menu .......................................................................................... 53
Image menu ........................................................................................ 54
Color menu.......................................................................................... 55
Geometry menu .................................................................................. 55
3D menu.............................................................................................. 56
Lamps menu ....................................................................................... 56
Setup menu......................................................................................... 57
Information menu ................................................................................ 57
WEB CONFIGURATION UTILITY .................................................. 58
Email settings...................................................................................... 59
Projector controls ................................................................................ 60
PJLink security options ....................................................................... 61
CONTENTS (continued)

Digital Projection E-Vision 6800 3D Series
This page is intentionally left blank.

Rev A January 2015
E-Vision 6800 3D Series
High Brightness Digital Video Projector
INSTALLATION AND QUICK-START GUIDE
4
LENS SHIFT
ZOOM
–
FOCUS
+
MENU
ENTER RETURN
SOURCE
POWER WARNING LAMP1 LAMP2
AUTO

Digital Projection E-Vision 6800 3D Series
Installation and Quick-Start Guide
IN THIS GUIDE
Rev A January 2015
IN THIS GUIDE
Getting To Know The Projector...................................................................... 3
Front and rear views ...................................................................................................3
Remote control............................................................................................................3
Control panel and indicators .....................................................................................4
Changing The Lens, Lamps And Color Wheel............................................ 5
Removing the lens ......................................................................................................5
Fitting the lens.............................................................................................................5
Changing the lamp......................................................................................................6
Changing the color wheel ..........................................................................................7
Positioning The Screen And Projector......................................................... 8
Operating The Projector ................................................................................... 9
Switching the projector on.........................................................................................9
Selecting an input signal or test pattern...................................................................9
Input signal........................................................................................................................ 9
Test pattern ....................................................................................................................... 9
Adjusting the lens .....................................................................................................10
Zoom...............................................................................................................................10
Focus ..............................................................................................................................10
Shift.................................................................................................................................10
Adjusting the image..................................................................................................10
Orientation ......................................................................................................................10
Aspect ratio .....................................................................................................................10
Picture.............................................................................................................................10
Switching the projector off.......................................................................................11

page 3
Digital Projection E-Vision 6800 3D Series
Installation and Quick-Start Guide
GETTING TO KNOW THE PROJECTOR
Rev A January 2015
Getting To Know The Projector
Front and rear views
Notes
The projector uses an infra-red
remote control.
Some of the controls are duplicated
on the projector control panel, as
shown on the next page.
 Theairltersshouldbecleanedor
changed regularly, depending on the
installation environment.
 Theltersshouldbechangedatthe
same time as the lamp is changed.
The projector lens is shipped
separately.
Lens
Connection
panel
Mains
input
Control
panel
Adjustable
foot
Front
infra-red
window
Rear
infra-red
window
Remote control
Infra-red
reception
40°
40°
Air
inlet
Air
inlet
Air
outlet
Lamp and color
wheel cover
Air lter
cover
Air lter
cover
LENSSHIFT
ZOOM
–
FOCUS
+
MENU
ENTER RETURN
SOURCE
POWER WARNING LAMP1 LAMP2
AUTO

page 4
Digital Projection E-Vision 6800 3D Series
Installation and Quick-Start Guide
GETTING TO KNOW THE PROJECTOR
Rev A January 2015
Control panel and indicators
Some of the controls from the remote control are duplicated on the projector control panel, as shown
on the right.
The SOURCE and AUTO buttons have the same function as the INPUT and AUTO SYNC buttons on
the remote control.
The Power indicator will show amber when in standby and green when the projector is on, and will
ash when the projector is warming up or cooling down.
The Warning indicator will ash to show any error situations.
The Lamp indicators will show which lamp is in use, and whether the projector is in Normal or Eco
mode, and will ash to show lamp status.
The chart below shows all possible combinations of indicator lamp color.
Lens
controls
Menu
controls
MENU
RETURNENTER
SOURCE AUTO
POWER WARNING LAMP1 LAMP2
LENS SHIFT
FOCUS ZOOM
+
-
Notes
For full details of how to use the
controls and the menu system, see
the Operating Guide.
The SOURCE and AUTO buttons
have the same function as the
INPUT and AUTO SYNC buttons on
the remote control.

page 5
Digital Projection E-Vision 6800 3D Series
Installation and Quick-Start Guide
CHANGING THE LENS, LAMPS AND COLOR WHEEL
Rev A January 2015
Changing The Lens, Lamps And Color Wheel
Removing the lens
1. Remove the lens cap.
2. Push in the lens release lever, and turn the lens anti-clockwise.
3. Remove the lens.
Fitting the lens
1. Position the lens so that the label marked ‘O’ is at the top, push in the lens release lever and and gently insert the lens all the way into the
lens mount.
2. Turn the lens clockwise until it clicks into place.
12
Notes
Always allow the lamp to cool for
5 minutes before:
- disconnecting the power
- moving the projector
The projector lens is shipped
separately.
1
2
3

page 6
Digital Projection E-Vision 6800 3D Series
Installation and Quick-Start Guide
CHANGING THE LENS, LAMPS AND COLOR WHEEL
Rev A January 2015
Changing the lamp
1. Slide open the lamp compartment cover as shown in the picture.
2. Unscrew the two captive screws securing the lamp module.
3. Pull rmly upwards on the handle to remove the lamp module.
4. Insert a new lamp module.
5. Fasten the screws.
6. Replace the lamp compartment cover.
12 3
Notes
Always allow the lamp to cool for
5 minutes before:
- disconnecting the power
- moving the projector
The lamp must be changed only
by suitably qualied personnel.
The projector will shut down if the
cover is opened whilst in operation.
 Theltersshouldbechangedatthe
same time as the lamp is changed.
456

page 7
Digital Projection E-Vision 6800 3D Series
Installation and Quick-Start Guide
CHANGING THE LENS, LAMPS AND COLOR WHEEL
Rev A January 2015
Changing the color wheel
1. Slide open the lamp compartment cover as shown in the picture.
2. Unscrew the four captive screws securing the color wheel.
3. Remove the color wheel.
4. Insert a new color wheel.
5. Fasten the screws.
6. Replace the lamp compartment cover.
4 5 6
3
2
1
Notes
Always allow the lamp to cool for
5 minutes before:
- disconnecting the power
- moving the projector
The color wheel must be changed
only by suitably qualied
personnel.
The projector will shut down if the
cover is opened whilst in operation.

page 8
Digital Projection E-Vision 6800 3D Series
Installation and Quick-Start Guide
POSITIONING THE SCREEN AND PROJECTOR
Rev A January 2015
Positioning The Screen And Projector
1. Install the screen, ensuring that it is in the best position for viewing by your audience.
2. Mount the projector, ensuring that it is at a suitable distance from the screen for the image to ll the screen. Set the adjustable feet so that
the projector is level, and perpendicular to the screen.
Alternatively, ve M4 bolts (max length 12 mm [0.5 in]) can be used to attach the projector to a ceiling mount (optional accessory,).
Location of the ceiling mount holes at the bottom of the projector
1
2
3
4 5
Notes
Always allow the lamp to cool for
5 minutes before:
- disconnecting the power
- moving the projector
Ensure that there is at least
50cm (20in) of space between the
ventilation outlets and any wall,
and 10cm (4in) on all other sides.
If ceiling mounting, ensure there
is 30cm (12in) of space between
the projector and ceiling.
Do not stack the projectors.
Do not tilt the projector more than
±10° from side to side when in
use, as this may cause serious
lamp failure, damage the lamp
module and cause extra cost on
replacement.
±10° ±360°

page 9
Digital Projection E-Vision 6800 3D Series
Installation and Quick-Start Guide
OPERATING THE PROJECTOR
Rev A January 2015
Operating The Projector
Switching the projector on
• Connect the power cable between the mains supply and the projector. Switch on at the switch next to the power connector.
• Wait until the self-test has completed and the Power indicator on the projector control panel shows amber. The lamp will be off and the
projector will be in STANDBY mode.
• Press on the control panel or POWER ON on the remote control.
The Power indicator on the control panel will ash green for a few seconds whilst the lamp comes up to full brightness. When the
projector is ready for use, the Power indicator will show steady green.
Selecting an input signal or test pattern
Input signal
• Connect an image source to the projector. The signal should be automatically detected by the projector, and should be displayed within a
two or three seconds.
• If more than one signal is connected, then select the image you want to display:
Press SOURCE on the control panel to cycle through the inputs,
or press INPUT on the remote control, then use the LEFT and RIGHT arrow buttons to cycle through the inputs.
Test pattern
To display a test pattern, do either of the following:
• Press TEST PATTERN on the remote control, then use the LEFT and RIGHT arrow buttons to cycle through the patterns,
• Use the OSD (On-screen Display):
1. Open the Main menu, highlight Test Pattern and press ENTER to open the list of available test paterns.
2. Use the UP and DOWN arrow buttons to highlight the test pattern you wish to display and press ENTER.
Notes
Before switching on the projector
for the rst time, make sure
the electric circuit is grounded.
Poor grounding may damage the
projector.
Always allow the lamp to cool for
5 minutes before:
- disconnecting the power
- moving the projector
For full details of how to connect an
image source to the projector, see
the Connection Guide.
For full details of how to use the
controls and the menu system, see
the Operating Guide.

page 10
Digital Projection E-Vision 6800 3D Series
Installation and Quick-Start Guide
OPERATING THE PROJECTOR
Rev A January 2015
Adjusting the lens
Zoom
• Use the ZOOM +/− buttons on the control panel or on the remote control to adjust the lens so that the image lls the screen.
Focus
• Use the FOCUS +/− buttons on the control panel or on the remote control to adjust the lens until the image is sharp.
Shift
• Use the LENS SHIFT arrow buttons on the control panel to adjust the position of the image,
or press the LENS SHIFT button on the remote control then use the arrow buttons to adjust the position of the image.
Adjusting the image
Orientation
• Use the Orientation settings in the Setup menu.
Aspect ratio
• Press the ASPECT button on the remote control to cycle through all the available settings.
or use the Aspect Ratio setting in the Geometry menu.
Picture
• Press PICTURE on the remote control to open the Image menu, then use the sliders to adjust brightness, contract etc.
Notes
For full details of how to use the
controls and the menu system, see
the Operating Guide.

page 11
Digital Projection E-Vision 6800 3D Series
Installation and Quick-Start Guide
OPERATING THE PROJECTOR
Rev A January 2015
Switching the projector off
• Press on the control panel or STANDBY on the remote control, then press the button a second time within 5 seconds to conrm your
intention to switch off.
The lamp will go off, and the Power indicator on the control panel will ash amber for a few seconds whilst the lamp cools. The Power
indicator on the control panel will then show amber and the projector will be in Standby mode.
• Switch off at the switch next to the power connector. Disconnect the power cable from the projector.
Notes
Always allow the lamp to cool for
5 minutes before:
- disconnecting the power
- moving the projector

Digital Projection E-Vision 6800 3D Series
Installation and Quick-Start Guide
This page is intentionally left blank.

Rev A January 2015
E-Vision 6800 3D Series
High Brightness Digital Video Projector
LENS SHIFT
ZOOM
–
FOCUS
+
MENU
ENTER RETURN
SOURCE
POWER WARNING LAMP1 LAMP2
AUTO
CONNECTION GUIDE
4

Digital Projection E-Vision 6800 3D Series
Connection Guide
IN THIS GUIDE
Rev A January 2015
IN THIS GUIDE
Signal Inputs And Outputs ............................................................................. 15
Supported Signal Input Modes ..................................................................... 16
2D input modes .........................................................................................................16
3D input modes .........................................................................................................18
Control Connections ........................................................................................ 20