Digital Projection Titan series User manual

Rev C July 2014
USER MANUAL
INSTALLATION AND QUICK-START GUIDE
CONNECTION GUIDE
OPERATING GUIDE
REFERENCE GUIDE
Titan LED Series
High Brightness Digital Video Projector
114-999C

Digital Projection Titan LED Series
i
Rev C July 2014
i
About This Document
Please follow the instructions in this manual carefully to ensure safe and long-lasting use of the projector.
Keep this manual handy for future reference.
Symbols used in this manual
Many pages in this document have a dedicated area for notes. The information in that area is accompanied by the following symbols:
WARNING: this symbol indicates that there is a danger of physical injury to yourself and/or damage to the equipment unless
the instructions are closely followed.
ELECTRICAL WARNING: this symbol indicates that there is a danger of electrical shock unless the instructions are closely
followed.
NOTE: this symbol indicates that there is some important information that you should read.
Product revision
Because we at Digital Projection continually strive to improve our products, we may change specications and designs, and add new features
without prior notice.
Legal notice
Trademarks and trade names mentioned in this document remain the property of their respective owners.
Digital Projection disclaims any proprietary interest in trademarks and trade names other than its own.
Copyright © 2014 Digital Projection Ltd. All rights reserved.
Notes

Digital Projection Titan LED Series
ii
Rev C July 2014
ii
Introduction
Congratulations on your purchase of this Digital Projection product!
Your projector has the following key features:
• Highly reliable, ultra long life LED module generates a wide color gamut that exceeds cinema and HD colorspaces.
• Predictable and stable light output.
• Support for most 3D standards (if your projector is a 3D model)
• Full range of digital and legacy analog inputs
• Control of most aspects of the projector’s operation via LAN and RS232
• Support for a number of aspect ratios and screen sizes
• Nonlinear warp adjustment by moving points on an interpolated grid
• Ceiling mount and rear-screen installation options
• Simultaneous display of two sources via Picture-In-Picture
• Motorised lens mount
A serial number is located on the back of the projector. Please record it here:
Notes

Digital Projection Titan LED Series
iii
Rev C July 2014
iii
CONTENTS
INSTALLATION AND QUICK-START GUIDE..............................1
WHAT’S IN THE BOX? ................................................................... 3
CONNECTING THE POWER SUPPLY ............................................. 4
PROJECTOR OVERVIEW ............................................................... 5
Front and rear views ............................................................................. 5
Control panel indicators ........................................................................ 6
Connection panel indicators.................................................................. 7
REMOTE CONTROL....................................................................... 9
Infrared reception................................................................................ 11
POSITIONING THE SCREEN AND PROJECTOR........................... 12
Desktop mount.................................................................................... 12
Ceiling mount ...................................................................................... 12
Adjusting the optional rigging frame.................................................... 13
Adjusting pitch, roll and yaw................................................................ 14
FITTING THE LENS...................................................................... 15
OPERATING THE PROJECTOR.................................................... 16
Switching the projector on................................................................... 16
Switching the projector off................................................................... 16
Selecting an input signal or test pattern.............................................. 17
Input signal ........................................................................................ 17
Test pattern ........................................................................................ 17
Adjusting the lens................................................................................ 18
Zoom................................................................................................ 18
Focus ............................................................................................... 18
Shift ................................................................................................. 18
Adjusting the image............................................................................. 19
Orientation ......................................................................................... 19
Keystone ........................................................................................... 19
Picture .............................................................................................. 19
CONNECTION GUIDE ............................................................................21
SIGNAL INPUTS AND OUTPUTS.................................................. 23
Rear connection panel ........................................................................ 23
Side connection panel on 3D projectors ............................................. 25
Special considerations when using inputs 9-11 .................................. 26
Differences between inputs 9-11 and inputs 1-8 ........................................... 26
Input and processing architecture ............................................................ 26
EDID on the DVI and VGA inputs............................................................. 26
Using HDMI/DVI switchers with the projector ..................................... 27
DVI input connection example................................................................. 28
3D connections ................................................................................... 29
3D sources up to 60Hz requiring frame doubling and left/right interleaving.......... 29
3D sources above 60Hz not requiring frame doubling.................................... 29
Dual Pipe 3D ...................................................................................... 29
3D Sync in ......................................................................................... 30
3D Sync out ....................................................................................... 30
3D connection examples ....................................................................... 31
CONTROL CONNECTIONS........................................................... 32
LAN connection examples .................................................................. 33
RS232 connection example ................................................................ 34

Digital Projection Titan LED Series
iv
Rev C July 2014
iv
OPERATING GUIDE ................................................................................35
USING THE MENUS ..................................................................... 38
Menus and sub-menus........................................................................ 38
Drop-down lists ................................................................................... 39
Sliders ................................................................................................. 40
Commands.......................................................................................... 40
Editing elds........................................................................................ 41
USING THE PROJECTOR............................................................. 42
Main menu .......................................................................................... 42
Lens menu .......................................................................................... 43
Zoom................................................................................................ 43
Focus ............................................................................................... 43
Calibrate Zoom and Calibrate Focus......................................................... 43
Center Lens ....................................................................................... 43
Nudge............................................................................................... 44
Lens Presets ...................................................................................... 44
Image menu ........................................................................................ 45
Video Filters ....................................................................................... 45
VGA Setup......................................................................................... 45
Color menu.......................................................................................... 46
Gamut .............................................................................................. 46
Black Level and Gain sliders................................................................... 46
Geometry menu .................................................................................. 47
Aspect Ratio....................................................................................... 47
Overscan........................................................................................... 47
Size & Position.................................................................................... 48
Blanking ............................................................................................ 48
Geometry Engine................................................................................. 49
Edge Blend menu................................................................................ 55
Overview ........................................................................................... 55
Array H Position and V Position............................................................... 56
S-Curve Value .................................................................................... 57
Blending............................................................................................ 59
Segmentation ..................................................................................... 60
Blend Width........................................................................................ 62
Black Level Uplift ................................................................................. 62
Reduce Black Level Uplift Width .............................................................. 63
Blending images from multiple projectors ........................................... 66
Before you start................................................................................... 66
Edge Blend procedure .......................................................................... 67
PIP menu ............................................................................................ 75
3D menu.............................................................................................. 76
3D types............................................................................................ 77
Some 3D settings explained ............................................................... 79
Dark Time.......................................................................................... 79
Source Dominance............................................................................... 79
Sync Offset ........................................................................................ 79
Frame Rate Multiplier............................................................................ 80
CONTENTS (continued)

Digital Projection Titan LED Series
v
Rev C July 2014
v
Setup menu......................................................................................... 81
Reset Default Settings .......................................................................... 81
Input Conguration............................................................................... 82
Network ............................................................................................ 83
On Screen Display ............................................................................... 84
System ............................................................................................. 85
Setting up an IR address ....................................................................... 86
Information menu ................................................................................ 87
LED ................................................................................................. 87
Conguration...................................................................................... 88
REFERENCE GUIDE................................................................................89
THE DMD™.................................................................................. 92
CHOOSING A LENS ..................................................................... 94
Basic calculation ................................................................................. 95
Basic calculation example................................................................... 96
Full lens calculation............................................................................. 97
Introducing TRC .................................................................................. 97
Calculating TRC .................................................................................. 98
TRC table .......................................................................................... 98
Calculating the throw ratio with TRC ......................................................... 99
Full lens calculation example ............................................................ 100
SCREEN REQUIREMENTS......................................................... 101
Fitting the image to the DMD™......................................................... 101
1080p images displayed full width .......................................................... 101
1080p images displayed full height......................................................... 102
WUXGA images displayed full width ....................................................... 103
WUXGA images displayed with a height of 1080 pixels................................ 103
WUXGA images displayed full height ...................................................... 104
Diagonal screen sizes....................................................................... 105
Fitting the image to the screen.......................................................... 106
Positioning the screen and projector................................................. 107
POSITIONING THE IMAGE......................................................... 108
Maximum offset range....................................................................... 110
ASPECT RATIOS EXPLAINED.....................................................111
Aspect ratio examples for DMD™ resolution 1080p ......................... 112
Aspect ratio examples for DMD™ resolution WUXGA...................... 115
Aspect ratio example: TheaterScope................................................ 118
FRAME RATES AND PULLDOWNS EXPLAINED..........................119
Interlaced and progressive scan ....................................................... 119
Frame rates of image sources .......................................................... 119
Pulldowns - conversion into destination formats............................... 120
2:3 (normal) pulldown ......................................................................... 120
2:3:3:2 (advanced) pulldown................................................................. 121
APPENDIX A: LENS PART NUMBERS........................................ 122
CONTENTS (continued)

Digital Projection Titan LED Series
vi
Rev C July 2014
vi
APPENDIX B: LENS CHARTS .................................................... 123
How to use the lens charts................................................................ 123
How to nd the right lens chart.......................................................... 124
1080p (1920 x 1080 pixels) .................................................................. 124
WUXGA (1920 x 1200 pixels)................................................................ 125
DMD™ resolution 1080p / WUXGA, full width images...................... 126
DMD™ resolution 1080p, 1.25:1 images .......................................... 128
DMD™ resolution 1080p, 1.33:1 images .......................................... 130
DMD™ resolution 1080p, 1.6:1 images ............................................ 132
DMD™ resolution 1080p, 1.66:1 images .......................................... 134
DMD™ resolution WUXGA, 1.25:1 images....................................... 136
DMD™ resolution WUXGA, 1.33:1 images....................................... 138
APPENDIX C: SUPPORTED SIGNAL INPUT MODES .................. 140
2D input modes................................................................................. 140
3D input modes................................................................................. 143
APPENDIX D: MENU MAP.......................................................... 145
Input Selection .................................................................................. 145
Test Pattern ....................................................................................... 145
Lens .................................................................................................. 145
Image ................................................................................................ 146
Color.................................................................................................. 146
Geometry .......................................................................................... 147
Edge Blend........................................................................................ 148
PIP .................................................................................................... 149
3D...................................................................................................... 149
Setup................................................................................................. 150
Information ........................................................................................ 151
CONTENTS (continued)
APPENDIX E: WIRING DETAILS................................................. 152
Signal inputs and outputs.................................................................. 152
Input 1: VGA..................................................................................... 152
Input 2: HDMI ................................................................................... 153
Output: SPDIF .................................................................................. 153
Input 3: DVI...................................................................................... 154
Input 4: 3G-SDI ................................................................................. 155
Input 5: Composite 1 .......................................................................... 155
Input 6: S-Video ................................................................................ 155
Input 7: Component............................................................................ 155
Input 8: CVBS................................................................................... 155
Input 9: MAIN/DVI.............................................................................. 156
Input 10: SUB/HDMI ........................................................................... 157
Control connections .......................................................................... 158
Update port ...................................................................................... 158
Wired remote control .......................................................................... 158
RS232 ............................................................................................ 159
LAN connection................................................................................. 159
APPENDIX F: GLOSSARY OF TERMS........................................ 160

Digital Projection Titan LED Series
vii
Rev C July 2014
vii
CONTENTS (continued)
TECHNICAL SPECIFICATIONS .................................................. 173
Models............................................................................................... 173
Inputs and outputs............................................................................. 174
Bandwidth ......................................................................................... 174
Remote control and keypad .............................................................. 174
Automation control ............................................................................ 174
Color temperature ............................................................................. 174
LED ................................................................................................... 175
Lenses............................................................................................... 175
Lens mount ....................................................................................... 175
Mechanical mounting ........................................................................ 175
Orientation......................................................................................... 175
Electrical and physical specications................................................ 176
Safety & EMC regulations................................................................. 176
Accessories....................................................................................... 176

Rev C July 2014
INSTALLATION AND QUICK-START GUIDE
Titan LED Series
High Brightness Digital Video Projector

Digital Projection Titan LED Series IN THIS GUIDE Installation and Quick-Start Guide
Rev C July 2014
IN THIS GUIDE
What’s In The Box?............................................................................................. 3
Connecting The Power Supply........................................................................ 4
Projector Overview............................................................................................. 5
Front and rear views ...................................................................................................5
Control panel indicators.............................................................................................6
Connection panel indicators......................................................................................7
Remote Control.................................................................................................... 9
Infrared reception......................................................................................................11
Positioning The Screen And Projector....................................................... 12
Desktop mount ..........................................................................................................12
Ceiling mount ............................................................................................................12
Adjusting the optional rigging frame ......................................................................13
Adjusting pitch, roll and yaw ...................................................................................14
Fitting The Lens ................................................................................................ 15
Operating The Projector................................................................................. 16
Switching the projector on.......................................................................................16
Switching the projector off.......................................................................................16
Selecting an input signal or test pattern.................................................................17
Input signal......................................................................................................................17
Test pattern .....................................................................................................................17
Adjusting the lens .....................................................................................................18
Zoom...............................................................................................................................18
Focus ..............................................................................................................................18
Shift.................................................................................................................................18
Adjusting the image..................................................................................................19
Orientation ......................................................................................................................19
Keystone .........................................................................................................................19
Picture.............................................................................................................................19

Digital Projection Titan LED Series WHAT’S IN THE BOX? Installation and Quick-Start Guide
3
Rev C July 2014
What’s In The Box? Notes
Make sure your box contains
everything listed. If any pieces are
missing, contact your dealer.
Only one remote will be supplied
with the projector. For more
information, see Remote Control
further in this guide.
You should save the original box
and packing materials, in case you
ever need to ship your projector.
When transporting the projector,
always ensure that the removable
feet are fully wound in.
The projector is shipped without a
lens.
Only one power cable - dependent
on the destination territory - will be
supplied with the projector.
Remote control (105-023) 4x AAA batteries
Power cable, United Kingdom
(102-180)
User Manual on disc
(115-759)
Important Information (115-000)
Power cable, Europe
(102-163)
Power cable, North America
(102-165)
Projector
Remote cable
(102-162)
VGA HDMI DVI 3GSDI
CVBS1 SVIDEO
CLOSE
12 3 4
COMP CVBS2
5 6 7 8
9 0 10+ #
MAIN SUB DUAL HD-T
OFF ON
ALT ROLL
PITCH YAW
FOCUS CAL
SHIFT ZOOM
EYE
SWAP
MAIN/PIP
SWAP
BRI CON GAMMA 3D
ON/OFF
PIP
ON/OFF
LOAD SAVE TEST ADDR
BACKLIGHT
RGB
PRESET
SHUTTER
OPEN
POWER
MENU
OK
EXIT INFO

Digital Projection Titan LED Series CONNECTING THE POWER SUPPLY Installation and Quick-Start Guide
4
Rev C July 2014
Connecting The Power Supply
Lift the cable lock up, push the mains connector in rmly and
push the lock down to secure the cable.
1AC mains inlet with cable lock
Notes
Use only the power cable
provided.
Ensure that the power outlet
includes a ground connection as
this equipment MUST be earthed.
Handle the power cable carefully
and avoid sharp bends. Do not
use a damaged power cable.
Front view of the projector
1

Digital Projection Titan LED Series PROJECTOR OVERVIEW Installation and Quick-Start Guide
5
Rev C July 2014
Projector Overview
Front and rear views
1Front infrared window
2 Airinletswithairlters
3Lens
4Lens motor
5Mains input
6Adjustable feet
7Air outlets
8 Airinletswithairlters
9Rear connection panel
10 Control panel
11 Side connection panel
Notes
The side connection panel is
available on 3D models only.
4 5 63
21
Front view
8
Rear view
10 11
7
9

Digital Projection Titan LED Series PROJECTOR OVERVIEW Installation and Quick-Start Guide
6
Rev C July 2014
Control panel indicators
1Power indicator
Behavior Meaning
Off The projector is switched off.
On (amber) The projector is in Standby mode.
On (green) The projector is switched on (Normal mode).
2Shutter indicator
Behavior Meaning
On (amber) The shutter is closed.
On (green) The shutter is open.
Notes
Only the controls shown highlighted
are used on this projector.
During startup all LEDs light up
at the same time to indicate the
projector is carrying out a self-test.
1 2
CTRL FOCUS
AUTO INFO SHIFT ZOOM
MENU INPUT
OK
EXIT INPUT
OFF
ON
OSD
ON
OFF
POWER
OPEN
CLOSE
SHUTTER
+
_
RPY

Digital Projection Titan LED Series PROJECTOR OVERVIEW Installation and Quick-Start Guide
7
Rev C July 2014
Connection panel indicators
1LED illumination indicator
Behavior Meaning
On (green) The LED illumination is switched on.
Flashing (amber) The LED illumination is cooling down.
On (red) Projector in standby: Lamp Timer Error (call service)
Projector on: Ballast Comms Error (call service)
Flashing (red) Projector in standby: Lamp Error on previous operation
Projector on: Lamp Error
2Error indicator
Behavior Meaning
On (red) Voltage Error
Flashing (red) Fan / System Error
3Infrared indicator
Behavior Meaning
Flashing (blue) The projector is receiving input from the remote control or keypad.
4Input indicators
Behavior Meaning
On (green) Input selected. Signal detected and in range.
Flashing (green) Input selected, but signal is not detected or out of range.
1
2
3
4
Notes
For more information about
the connection panels, see the
Connection Guide.
A red LED always indicates an error.
If you receive an error indication,
restart the projector. If the problem
persists, contact your dealer.
The side connection panel is
available on 3D models only.
Side connection panel
Rear connection panel

Digital Projection Titan LED Series PROJECTOR OVERVIEW Installation and Quick-Start Guide
8
Rev C July 2014
Connection panel indicators - continued from previous page
5Sync in indicator
Behavior Meaning
On (green) Valid sync in.
6Sync out indicator
Behavior Meaning
On (green) Valid sync out.
Notes
For more information about
the connection panels, see the
Connection Guide.
The side connection panel is
available on 3D models only.
56
Side connection panel

Digital Projection Titan LED Series REMOTE CONTROL Installation and Quick-Start Guide
9
Rev C July 2014
Remote Control
1Transmit indicator
Flashes when the remote control sends a signal to the projector.
Lights solidly when the projector is in LENS ADJUSTMENT mode.
2Power ON / OFF
3ALT
Acts as a shift key. To use, press and hold this button, then press a green-labeled
button.
4Shutter OPEN / CLOSE
5MENU
Access the projector OSD (on-screen display).
6Navigation
Navigate through the menus with the arrows, conrm your choice with OK.
7Input selection
Select input source.
9, 0and 10+ are not used on 2D projectors as they are used for inputs on the side
connection panel.
8Image adjustment
Adjust brightness, contrast and gamma.
Press this button while holding the ALT button down to switch red, green and blue
channels on and off.
9Lens presets
To recall a lens preset, press and hold LOAD, then press a number button 1to 5.
To save a lens preset, press and hold SAVE, then press a number button 1to 5.
10 Remote control backlight ON / OFF
Make the remote control buttons glow in the dark, or switch this feature off.
continues on next page...
Notes
VGA HDMI DVI 3GSDI
CVBS1 SVIDEO
CLOSE
12 3 4
COMP CVBS2
5 6 7 8
9 0 10+ #
MAIN SUB DUAL HD-T
OFF ON
ALT ROLL
PITCH YAW
FOCUS CAL
SHIFT ZOOM
EYE
SWAP
MAIN/PIP
SWAP
BRI CON GAMMA 3D
ON/OFF
PIP
ON/OFF
LOAD SAVE TEST ADDR
BACKLIGHT
RGB
PRESET
SHUTTER
OPEN
POWER
MENU
OK
EXIT INFO
1
2
6
7
8
10
3
4
5
9

Digital Projection Titan LED Series REMOTE CONTROL Installation and Quick-Start Guide
10
Rev C July 2014
Remote control - continued from previous page
11 Lens controls
Adjust position, zoom and focus.
Perform calibration when you change the lens.
12 INFO
Open the Information menu.
13 TEST
Switch to test pattern.
14 IR address
Set up an address to match the IR address of a projector.
Notes
Only the controls shown highlighted
are used on this projector.
For more information about IR
addresses, see Setting up an IR
address in the Operating Guide.
VGA HDMI DVI 3GSDI
CVBS1 SVIDEO
CLOSE
12 3 4
COMP CVBS2
5 6 7 8
9 0 10+ #
MAIN SUB DUAL HD-T
OFF ON
ALT ROLL
PITCH YAW
FOCUS CAL
SHIFT ZOOM
EYE
SWAP
MAIN/PIP
SWAP
BRI CON GAMMA 3D
ON/OFF
PIP
ON/OFF
LOAD SAVE TEST ADDR
BACKLIGHT
RGB
PRESET
SHUTTER
OPEN
POWER
MENU
OK
EXIT INFO
11
12
14
13

Digital Projection Titan LED Series REMOTE CONTROL Installation and Quick-Start Guide
11
Rev C July 2014
Infrared reception
The projector has infrared sensors at the front and back.
The angle of acceptance is 40°. Make sure that the remote control is within the angle of
acceptance when trying to control the projector.
Notes
Infrared reception is conrmed by
the blue IR LED ashing on the
control panel.
The infrared receivers are disabled
when a remote control is connected
via a cable. For more information,
see Control Connections in the
Connection Guide.
40°
40°
Infrared reception

Digital Projection Titan LED Series POSITIONING THE SCREEN AND PROJECTOR Installation and Quick-Start Guide
12
Rev C July 2014
Positioning The Screen And Projector
1. Install the screen, ensuring that it is in the best position for viewing by your audience.
2. Position the projector, ensuring that it is at a suitable distance from the screen for the image to ll the screen.
Desktop mount
If the projector is to be operated from a at surface such as a projector table, adjust the projector level by turning the four feet
under the chassis. Set the adjustable feet so that the projector is level, and perpendicular to the screen.
Ceiling mount
Inverted installation is recommended for maximum lens offset.
Remove the four adjustable feet 1and use the four M10 xing holes 2for ceiling mounting.
You can also use the optional rigging frame, or mount two projectors together using the optional Titan 40K assembly.
1 2
Notes
Ensure that there is at least
30 cm (12 in.) of space between
the ventilation outlets and any
wall, and 10 cm (4 in.) on all other
sides.
Do not place heavy objects on top
of the projector chassis. Only the
chassis corners and the rigging
frame are capable of withstanding
the weight of another projector.
Do not place the projector with its
front panel down on a surface, as
this may damage the lens or the
lens release lever.
Backup safety chains or wires
should always be used with
ceiling mount installations.
The projector can be positioned at
any angle, as shown in the diagram:
See also Adjusting the optional
rigging frame further in this guide.
±360°
Ceiling
Desktop
±360°±360°
±360°