Dimplex DCTF3HCH User manual

For domestic household use only.
INSTRUCTION MANUAL
Heat/Cool/Humidifier Tower Fan
Model: DCTF3HCH

CAUTION: FAILURE TO FOLLOW THESE INSTRUCTIONS MAY CAUSE
INJURY AND/OR DAMAGE AND MAY INVALIDATE YOUR WARRANTY
Please read the operating instructions carefully before using your air circulator for the
first time and keep them in a safe place.
WARNING – This appliance must not be used in a bathroom.
WARNING – Do not use this appliance in the immediate surroundings of a bath, a
shower or a swimming pool.
WARNING – In order to avoid overheating, do not cover this heater.
WARNING – Do not use this heater in small rooms when they are occupied by persons
not capable of leaving the room on their own, unless constant supervision is provided.
WARNING – To reduce the risk of fire, keep textiles, curtains, or any other flammable
material a minimum distance of 1 metre from the air outlet.
WARNING - In order to avoid a hazard due to inadvertent resetting of the thermal cut-
out, this appliance must not be supplied through an external switching device, such as
a timer, or connected to a circuit that is regularly switched on and off by the utility.
WARNING – Some parts of this unit can become very hot and cause burns. Particular
attention has to be given where children and vulnerable people are present.
• If the supply cord is damaged it must only be replaced by the manufacturers service
agent or a similarly qualified person in order to avoid a hazard.
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by
a person responsible for their safety.
• Children should be supervised to ensure they do not play with the appliance.
• Prior to cleaning or other maintenance, the appliance must be disconnected from
the supply mains.
• Never immerse the appliance in water or other liquids.
• Do not place on soft, unstable or non-horizontal/angled surfaces.
• Never operate the appliance if a cable or connector has been damaged, after
appliance malfunction or if the appliance was dropped or is otherwise damaged.
• If the mains lead is damaged it must only be replaced by the manufacturers service
agent or a similarly qualified person in order to avoid a hazard.
IMPORTANT
THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND
RETAINED FOR FUTURE REFERENCE.
Note also the information presented on the appliance
2

• Please ask a professional service agent to repair the product. Improper repair may
cause danger to users.
• Disconnect the appliance from mains power whenever it is not in use, before
relocating it, and before cleaning.
• Operate the appliance only at the voltage specified on the rating label.
• Only connect the unit to a properly installed and easily accessible socket so that
you can quickly disconnect the plug if necessary.
• Do not connect this product to the mains using an extension lead.
• This product is only intended for INDOOR RESIDENTIAL applications. This air
circulator should not be used for commercial or industrial or leisure applications or
in small enclosed spaces.
• Never use the mains lead as a carrying strap or pulling lead.
• To avoid a fire or electrocution hazard, NEVER put the cord near heat registers,
radiator, stoves or heaters.
• DO NOT cover cord with carpeting, throw rugs, runners, or similar coverings.
• DO NOT route cord under furniture or appliances. Take care to position the cord
away from traffic areas and where it will not be a tripping hazard.
• DO NOT use the unit near windows or where water collects. Rain and water collection
may lead to a risk of fire or electric shock.
• DO NOT use this heater if it has been dropped.
• DO NOT use if there are visible signs of damage to the heater.
• The heater must not be located immediately below a power outlet.
• WARNING - To avoid danger of suffocation please remove all packaging materials
particularly plastic and EPS and keep these away from vulnerable people, children
and babies.
• NEVER drop or insert any object or fingers into any openings.
• sdiuqilelbammalfrehtorolortep,tniaperehwsnoitacolniecnailppaehtesutonoD
are used or stored.
• Do not use bug sprays or other flammable cleansers/vapour sprays on or around
the unit.
• Always switch off the unit and take the plug out of the socket:
• If you are not using the unit
• Before you clean or carry out maintenance on the unit
• If a fault occurs
• In the event of an electrical storm.
• Avoid electromagnetic interference. Keep the unit at least 1 metre away from
electrical appliances such as televisions & radios.
• Use this heater on a horizontal and stable surface.
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by
a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Children shall not plug in, regulate and clean the appliance or perform user
maintenance.
WARNING - DO NOT COVER the heater in any manner as it may overheat and become
a fire risk.
3

• Ensure the water quality is pure and below 40°C when utilizing the humidifying
function.
• Ensure water is being added to the appliance slowly with the use of a container to
avoid overflowing and exceeding the maximum water level.
• Ensure the cover of the water tank is tightly closed when in operation.
• The surface of the appliance must be kept dry. If you notice overflow, disconnect
the appliance immediately and dry before use again.
• If water droplets are blocking the spray port, wipe gently to remove before use
again.
•DO NOT allow water or other liquids to enter the interior of the heater. This may
cause a fire or an electric shock hazard.
•DO NOT try to disassemble and repair this product by yourself shall a problem
occur. Doing so can cause an electric shock hazard.
•DO NOT use this appliance with an extension lead or power board.
WARNING - KEEP BATTERIES OUT OF REACH OF CHILDREN
•Swallowing may lead to serious injury in as little as 2 hours or death, due to chemical
burns and potential perforation of the oesophagus.
•If you suspect your child has swallowed or inserted a button battery immediately
call the 24-hour Poisons Information Centre on 13 11 26 (in Australia) or 0800 764
766 (in New Zealand) for fast, expert advice.
•Examine devices and make sure the battery compartment is correctly secured,
e.g. that the screw or other mechanical fastener is tightened. Do not use if the
compartment is not secure.
•Dispose of used button batteries immediately and safely. Flat batteries can still be
dangerous.
• Do not ingest battery, Chemical Burn Hazard.
•This product contains a coin/button cell battery. If the coin/button cell battery is
swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
• Keep new and used batteries away from children.
•If the battery compartment does not close securely, stop using the product and
keep it away from children. If you think batteries might have been swallowed or
placed inside any part of the body, seek immediate medical attention.
•The batteries contain materials, which are hazardous to the environment; they must
be removed from the appliance before it is scrapped and they are disposed of safely.
4

Exposed to the
weather outdoors
Near water If the power cable
wires are frayed or cut
Where small children
may be left unattended
No extension leads or
power boards
Where there is risk
of fire or close to
a naked flame
Where the power
cable may be
damaged
On a slope or
uneven surface
Where it may be
damaged by
chemicals
If there is a risk
of water falling on
the unit
Where there is a risk
of interference by
foreign objects
This product is not
made for DIY repair
5

Model no. DCTF3HCH
Power supply 220-240V~50Hz
Rated power
13.8W (cooling)
2000W (heating)
Speed settings
2
Heat settings 2
Timer 12 hours
Mist output 120ml/h
Adjustable temperature 20-30°C
Water tank 1.5L
Oscillation 85°
Noise level (MAX) 55dB(A)
Weight (net) 3.6kg
Dimensions (w x d x h) 228 x 285 x 672mm
Specification
• For greater precision, please always refer to the rating label placed on the product.
6

MAX
MIN
Parts
Operation Panel
Air Inlet
Power Switch (back)
Filler (back)
Water Gauge Window
Indicator Light
Fog Outlet
Air Outlet
7

Control Panel
Remote Control
On/Off
Warm Wind Natural Wind
Increase Timer
Decrease Timer
Humidification
Increase Temperature
Decrease Temperature
Swing/Child Lock
Light
Temperature
Timer
Swing/Child Lock
Humidification
Natural Wind
Warm Wind
On/Off
LED Display
8

Assembly
1. Take the base of the Tower Fan, and align it to the bottom of the unit.
2. Fix the base onto the bottom of the unit using the four included screws.
3. The Tower Fan should look as per below (image 3). When the device is not in
use, place the remote control in the housing space on the top of the unit.
MAX
MIN
Remote Control Housing Unit
9

Operation
When the power is connected, flick the power switch at the back of the unit to turn
the device on. A buzzer noise will ring, and the power indicator light will switch on.
You can select different modes by pressing the keys/buttons on the control panel
and/or remote control.
1. By pressing the WARM WIND button, the unit will begin to produce warm air.
There are 2 heat settings within this unit. If you click this button once, the unit will
run on its low heat setting mode and the display will show 'H1.' If you click this
button again, the unit will run on its high heat setting mode, and the display will
show 'H2.'
2. By pressing the NATURAL WIND button, the unit will begin to produce a cool air
flow. There are 2 fan speed settings within this unit. If you click this button once,
the unit will run on its low fan speed setting, and the display will show 'C1.' If you
click this button again, the unit will run on its high fan speed setting, and the dis-
play will show 'C2.'
3. By pressing the HUMIDIFICATION button, the unit will utilize its humidifying func-
tion. This button allows the units atomizer to function, and the unit will start to
spray mists of water. The display will show a water droplet logo as per above, and
when this logo flashes, it means the water tank level is low and needs a fill. When
this happens, ensure you press this button again to stop the humidifying function,
and then carefully open the water tank cover to slowly add clean tap water
(purified water under 40°C). When you add water, please ensure the water level
is between the 'min' mark of the lowest water level line and the 'max' mark of the
highest water level line. This will help ensure that the water does not over-flow.
Ensure that the water tank cover is tight and secure, and the machine sur-face is
dry before further use.
MAX
MIN
Water tank cover
Water filling nozzle
Water level
10

Operation
4. When the WARM WIND/NATURAL WIND and/or HUMIDIFICATION func-
tions are turned on, press the SWING button to enable the unit to oscil-
late. up to 85° left and right. Press and hold this button for 3 seconds to
enable the CHILD LOCK function. In this state, the unit will be locked in
whatever settings where previously chosen. To release the unit from this
state, press the button for another 3 seconds.
5. When the WARM WIND/NATURAL WIND and/or HUMIDIFICATION
functions are turned on, press the TIMING button to set the timer button
to start the timer functionality. Use the remote control to increase or de-
crease the timer between 1-12 hours.
6. When the WARM WIND function is turned on, press the TEMPERATURE-
SETTING button to set the temperature. You are able to set the tempera-
ture as 20°C, 22°C, 24°C, 26°C, 28°C or 30°C. When the ambient temper-
ature is higher than the set temperature value, the heating and fan will be
turned off after a delay of 15 seconds. When the ambient temperature is
lower than the set temperature by 2 degrees, turn on the fan and heating
again to heat up.
7. When using the remote control, ensure it is aimed at the receiving win-
dow when using. As per above, the remote buttons are consistent with the
control panel. The LIGHT button on the remote control can be used to in-
dependently control the light of the control panel and turn off the screen.
Light Button
11

Over time, dust can accumulate on the grille covers, filter (if applicable) and fan
blades, which can affect the fans performance. It is recommended to clean the fan at
least once a month.
1. Turn the unit OFF and disconnect the appliance from the power supply.
2. Remove any dust build up with a soft brush.
3. Wipe the surface of the unit with a soft damp cloth. Mild detergent can be used
for any stubborn marks.
IMPORTANT
When the water tank is dirty, use a brush to clean the inside of the tank and ensure
the power is disconnected before cleaning. The control panel and other parts must
not come into contact with water or any other liquids.
After long term usage, dust may begin to block the air inlet. Regular maintenance
is required to clean this. Disconnect the power supply, unscrew the air inlet and
disassemble the inlet grille to open. Use a brush or rinse gently to remove dust. The
inlet grille must be completely dry before assembling back onto the fan.
Storage
If not using the unit for an extended period of time. After cleaning please:
• Turn the unit off, unplug and take care of the mains lead & plug.
•
Cover the unit and store it upright in a location where it will not receive direct
sunlight. NB- Prolonged exposure to direct sunlight will discolour the outer casing.
Cleaning
MAX
MIN
MAX
MIN
12

If the unit fails to operate efficiently, is broken or other problems arise, unplug and
do not operate. Ask for advice by calling your local after sales service agent or the
Customer Care Centre on 1300 556 816 (AU) / 0800 666 2824 (NZ).
Maintenance
Recycling: Do not dispose of electrical appliances as unsorted
municipal waste. Use separate collection facilities. Contact your
local government for information regarding the collection systems
available. If electrical appliances are disposed of in landfills or dumps,
hazardous substances can leak into the ground water, polluting the
food chain and damaging health and well-being.
Warranty
Please refer to the warranty card in the box for warranty information. For any
troubleshooting advice, please contact the relative Customer Care Centre below.
Glen Dimplex Australia Pty Ltd Glen Dimplex New Zealand Ltd
8 Lakeview Drive, 38 Harris Road, East Tamaki,
Scoresby 3179, Victoria Auckland 2013
Australia New Zealand
Ph: 1300 556 816 Ph: 0800 666 2824
13

14

15

Customer Care: 1300 556 816
[e-mail]
www.dimplex.com.au
Supplied by Glen Dimplex Australia
8 Lakeview Drive, Scoresby, Victoria, 3179
© Glen Dimplex Australia. All rights reserved. Material contained in this publication may not be reproduced in whole or in part, without
prior permission in writing of Glen Dimplex Australia.
DCTF3HCH v1
16