Directed 403.SUBARU2 User manual

DB3 403.SUBARU2
v1.38
2010 Subaru Outback

Introduction 3
Vehicle function compatibilities 4
Pre-installation and application warnings 5
Wiring diagram 6
Locating components in the vehicle 7
Vehicle connections 8
Module programming 11
For Convenience-Only programming, see next section. 11
Module programming for convenience only (skip transponder) 12
Key2GO 13
Connecting the module 13
LED diagnostics and troubleshooting 14
Soft reset 16
Hard reset 16
Feature programming 17
Feature and option list 18
Limited one year consumer warranty 19
Quick Reference Guide (customer copy) 20
Contents

3403.SUBARU2 1.38 2010 Subaru Outback
©2022 VOXX•DEI LLC. All rights reserved.
Introduction
DB3 is an all-in-one door lock and override module.
Warning!
This module can only be flashed and configured using DirectLink at www.directechs.com or using the Directechs
Mobile application for smartphones. Refer to “Connecting the module” for more information.

4403.SUBARU2 1.38 2010 Subaru Outback
©2022 VOXX•DEI LLC. All rights reserved.
Vehicle function compatibilities
This section lists all the functions compatible with this vehicle for the installation illustrated in this guide.
Note: The telematics features listed below (with an asterisk) ONLY apply when using SmartStart.
Heated Mirrors
Rear Window Defogger Activation
Arm Factory Security
Disarm Factory Security
Door Lock Control
Door Unlock
Driver Priority Unlock
Trunk / Hatch Release
Control of aftermarket alarm with OEM remote
Key2GO
Immobilizer Bypass-Data No Key Req'd
Remote Start Takeover
SmartStart
Tach / RPM Output
Entry Monitoring ALL Door Pins
Entry Monitoring Trunk/Hatch Pin
Brake Status (foot brake)
E-Brake Status

5403.SUBARU2 1.38 2010 Subaru Outback
©2022 VOXX•DEI LLC. All rights reserved.
Pre-installation and application warnings
START HERE This section highlights important information for this specific firmware and will assist in pricing accordingly, as
well as bringing awareness to any operational or vehicle limitations.
Compatibilities and Requirements
T-Harness
compatible T-Harness is not compatible. Keys required for
programming 1Keys required for operation 0
Vehicle Takeover Refer to the Quick Reference Guide section for more details.
Firmware notes
Key2GO: Mandatory to control the immobilizer override in this firmware.
All connectors are displayed from the wire side (unless specified otherwise).
Refer to the "Vehicle connections" following the installation diagram.
Footnotes
[1] Hood pin: The installation of an aftermarket hood pin is only required on vehicles that are not equipped with a factory
hood pin, or if not supported in data.
[2] Tach: Optional connection required on some remote starters, which do not support a tach signal in D2D.
[3] Keysense connection: Only needed if keysense is not recognized through data at the time of programming. Refer to the
"LED diagnostics & Troubleshooting" section for more details.
[4] Key Release Output: Only required for Pit Stop mode or manual transmission vehicles.

6403.SUBARU2 1.38 2010 Subaru Outback
©2022 VOXX•DEI LLC. All rights reserved.
Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram ( ).
7 6 5 43 2 1
17 16 1415 1213 1011 89
27 26 2425 2223 2021 1819
34 33 32 30
31 2829
123
456
7 6 5 4 3 2 1
17 16 1415 1213 1011 89
25 24 2223 2021 1819
31 30 28 262729
7 6 5 4 3 2
19 18 1617 1415 1213 1011
27 26 2425 2223
35 34 32 3031
1
9
21
29
8
33
20
28
D2D Port
(-) Ground (-) Ground
(-) Parking Lights Output
HS CAN High: Tan/Black: 3
HS CAN Low: Tan : 4
Immo. Data Interrupt (vehicle side): Orange/Red: 10
Immo. Data Interrupt (connector side): Yellow/Red: 11
Keyless Data Interrupt (vehicle side): Yellow: 8
Keyless Data Interrupt (connector side): Orange/Yellow: 9
Keyless Data (connector side): Yellow/Black: 10
Immo. Data (vehicle side): Orange/Black: 11
1412
10 42
7: Pink/White:
(+) Keysense
Input
Wiring diagram
XKD2D65
BIU (A)
(white conn.
right of steering column)
Immo. Data:
White/Blue,
pin 31
BIU (D)
(white connector right of steering column)
86 85
30
87a
87
(-) Security Light Output: Green/Black: 2
(AC) Tach Input
(AC) Tach Output: Violet/White: 5
Keyless Data: Yellow,
pin 11
(-) Security Light:
Brown/Red, pin 26
BIU (B)
(white connector right of steering column)
HS CAN Low:
Blue, pin 28
HS CAN High:
Red, pin 20
(-) Parking Lights:
Black/White, pin 17
(+) Keysense:
Black/White, pin 4
CUT
HS CAN 2 Low: Orange/Brown: 6
HS CAN 2 High: Orange/Green: 5
OBDll Diagnostic
(connector side view)
16
8
9
1
HS CAN 2 Low:
Blue, pin 14
HS CAN 2 High:
Red, pin 6
CUT
CUT
(+) 12V: White, pin 3
(+) Starter 2:
White/Orange or
White/Green, pin 6
Ignition connector
(black or white conn.
at Ignition Switch)
86 85
30
87a
87
(+) Ignition Output
(+) Accessory 1 Output
(+) Accessory 2 Output
(-) Starter 2 Output
(+) Starter 1 Output
(+) 12V Input
Fuse 20A
(+) Accessory 2: Yellow, pin 5
(+) Accessory 1: Blue, pin 4
(+) Ignition:
Green, pin 1
(+) Starter 1: White/Blue
or White/Black, pin 2
(-) Key Release Output: Blue/Red: 12
Only required for
Pit Stop Mode
or Manual
Transmission
vehicles.
See details in the
Vehicle Wiring
Reference Chart
section.
BIU
(right of steering column)
(-) Hood Pin Input
Hood Pin

7403.SUBARU2 1.38 2010 Subaru Outback
©2022 VOXX•DEI LLC. All rights reserved.
Locating components in the vehicle
86 85
30
87a
87
86
(+) 12V
85
30
87a
87
(+) 12V
(-) Ground
(+) Key Release 2:
Orange, pin 3
(-) Key Release 1:
Brown/Red or
Black/Red, pin 4
BCM (B)
(white connector
right of steering column)
AB
C
D
BCM
(behind the fuse box)
7654 3 2
1918 1617 1415 1213 1011
27 26 2425 2223
35 34 32 3031
1
9 8
33
1412
10 42
(-) Key Release Output: Blue/Red: 12
Only required for Pit Stop mode or manual transmission vehicles.
Key release connection
21
29
20
28

8403.SUBARU2 1.38 2010 Subaru Outback
©2022 VOXX•DEI LLC. All rights reserved.
Vehicle connections
The connection information listed below is specific to the 2010 Subaru Outback. Refer to “Pre-installation and application warnings” for a list of important notes.
Data 14-pin blue connector (H1)
Module Connects To
Conn./Pin Color Description Wire Location (+/-) Wire Color
H1/1 Light Green No Connection No Connection
H1/2 Violet/Yellow No Connection No Connection
H1/3 Tan/Black (DATA) HS CAN 1 High BIU right of steering column, white 35 pin plug (B), pin 20 data red
H1/4 Tan (DATA) HS CAN 1 Low BIU right of steering column, white 35 pin plug (B), pin 28 data blue
H1/5 Orange/Green (DATA) HS CAN 2 High OBD-Data Link Connector, white 16 pin plug, pin 6 data red
H1/6 Orange/Brown (DATA) HS CAN 2 Low OBD-Data Link Connector, white 16 pin plug, pin 14 data blue
H1/7 Brown Relay N.O. No Connection No Connection
H1/8 Yellow Relay COM. Keyless Data Interrupt (veh. side) BIU right of steering column, white 31 pin plug (D), pin 11 data yellow
H1/9 Orange/Yellow Relay N.C. Keyless Data Interrupt (conn. side) BIU right of steering column, white 31 pin plug (D), pin 11 data yellow
H1/10 Orange/Red Relay N.C. Immo Data Interrupt (veh. side) BIU right of steering column, white 34 pin plug (A), pin 31 data white/blue
H1/11 Yellow/Red Relay COM. Immo Data Interrupt (conn. side) BIU right of steering column, white 34 pin plug (A), pin 31 data white/blue
H1/12 Brown/Red Relay N.O. No Connection No Connection
H1/13 Red (+) W2W Only - 12 Volt Input ignition switch, white 6 pin plug, pin 3 + white (40A)
H1/14 Black (-) W2W Only - Ground (chassis ground)
Output 12-pin red connector (H2)
Module Connects To
Conn./Pin Color Description Wire Location (+/-) Wire Color
H2/1 Black/White (-) W2W Only - E-Brake Output Remote Starter
H2/2 Green/Black (-) Security Light Output Must use a relay.
BIU right of steering column, white 31 pin plug (D), pin 26
- brown/red
H2/3 Green/White (-) W2W Only - Door Output Remote Starter
H2/4 Red/Black (-) W2W Only - Trunk Output Remote Starter
H2/5 Violet/White (AC) W2W Only - Tach Output [2] Remote Starter
H2/6 Gray (+) W2W Only - Brake Output Remote Starter
H2/7 Gray/Black No Connection No Connection
H2/8 Violet/Green No Connection No Connection
H2/9 Violet/Brown No Connection No Connection
H2/10 Yellow/Black Keyless Data (conn. side) BIU right of steering column, white 31 pin plug (D), pin 11 data yellow
H2/11 Orange/Black Immo Data (veh. side) BIU right of steering column, white 34 pin plug (A), pin 31 data white/blue
H2/12 Blue/Red (-) W2W Only - Key Release Output [4] Must use a relay.
BIU right of steering column, white 35 pin plug (B), pins 4, 3
-,+ black/red (1); orange (2)

9403.SUBARU2 1.38 2010 Subaru Outback
©2022 VOXX•DEI LLC. All rights reserved.
Input 10-pin black connector (H3)
Module Connects To
Conn./Pin Color Description Wire Location (+/-) Wire Color
H3/1 Green (-) W2W Only - Lock Input Remote Starter
H3/2 Blue (-) W2W Only - Unlock Input Remote Starter
H3/3 Red/White (-) W2W Only - Trunk Input Remote Starter
H3/4 White/Violet No Connection No Connection
H3/5 Violet/Black No Connection No Connection
H3/6 White/Black No Connection No Connection
H3/7 Pink/White (+) Keysense Input [3] BIU right of steering column, white 34 pin plug (A), pin 4 + black/white
H3/8 Violet No Connection No Connection
H3/9 Pink No Connection No Connection
H3/10 Blue/White (-) W2W Only - Ground When Running (Status) Input Remote Starter
D2D 4-pin white connector (H4)
Module
Conn./Pin Color Description
H4/1 Blue (Data) TX
H4/2 Black (-) Ground
H4/3 Green (Data) RX
H4/4 Red (+) 12 Volt
RF 2-pin white connector (H5)
Module
Conn./Pin Color Description
H5/1 N/A No Connection
H5/2 N/A No Connection

10 403.SUBARU2 1.38 2010 Subaru Outback
©2022 VOXX•DEI LLC. All rights reserved.
Additional remote start connections
(Not all of these connections may be required for your installation. Refer to the wiring diagram for vehicle-specific connections.)
Wire Connects To
Wire Location (+/-) Wire Color
12 Volts ignition switch, white 6 pin plug, pin 3 + white (40A)
Accessory ignition switch, white 6 pin plug, pin 4 + blue
Accessory 2 Not Applicable
Hood Pin hood switch or Remote Start Module behind dash fuse box, white 4
pin plug, pin 4
- yellow/black (with remote start only)
Ignition ignition switch, white 6 pin plug, pin 1 + green
Parking Lights - BIU right of steering column, white 35 pin plug (B), pin 17 - black/white
Second Starter ignition switch, white 6 pin plug, pin 6 + white/green or white/orange
Starter ignition switch, white 6 pin plug, pin 2 + white/blue
Tachometer instrument cluster, white 40 pin plug, pin 30 or ECM behind glove
box, white 35 pin plug (B), pin 15
ac red/white to white/green