Directed Directechs HYUNDAI1 User manual

HYUNDAI1
INSTALLATION GUIDE
This product is intended for installation by a professional installer only! Attempts to install this
product by a person other than a trained professional may result in severe damage to a vehicle’s
electrical system and components.
2019-11-06
© 2019 Directed, Vista CA
Directed Digital
Solutions
Designed by Installers for Installers

Contents
Warning! Safety first ....................................................................................................................... 3
Introduction .................................................................................................................................... 4
Pre-installation and application warnings ..................................................................................... 4
Vehicle application guide........................................................................................................... 5
Wiring connections ......................................................................................................................... 6
Main power harness (H1), 12-pin thick gauge connector ............................................................... 6
Auxiliary output harness (H2), 16-pin black connector ................................................................... 6
Analog harness (H3), 18-pin white connector ............................................................................... 7
MC501 harness (H4), 8 thick-gauge wires (optional)..................................................................... 7
Installation (wiring diagrams & vehicle wiring reference charts) ............................................................ 8
Type 1 ..................................................................................................................................... 8
Type 2a - Automatic Transmission.............................................................................................. 10
Type 2b - Manual Transmission ................................................................................................. 11
Type 3 ................................................................................................................................... 13
Type 4 ................................................................................................................................... 15
Type 5 ................................................................................................................................... 17
Type 6a - Automatic Transmission.............................................................................................. 19
Type 6b - Manual Transmission ................................................................................................. 20
Connecting the module .................................................................................................................. 22
Important! .............................................................................................................................. 22
Manual or automatic transmission selection ................................................................................ 22
Optional sensors ..................................................................................................................... 23
RF Systems ............................................................................................................................. 23
When used in conjunction with SmartStart.................................................................................. 23
Module programming.............................................................................................................. 24
LED diagnostics and troubleshooting.......................................................................................... 25
Soft reset................................................................................................................................ 27
Hard reset .............................................................................................................................. 27
Learning the Tach (not needed with Virtual Tach) ............................................................................... 28
Initializing Virtual Tach (not needed with hardwired or data tach applications) ..................................... 28
Limited lifetime consumer warranty .................................................................................................. 29
Quick Reference Guide.................................................................................................................. 30

Warning! Safety first
The following safety warnings must be observed at all times:
• Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer.
• When properly installed, this system can start the vehicle via a command signal from the remote control. Therefore, never
operate the system in an area that does not have adequate ventilation.
The following precautions are the sole responsibility of the user; however, authorized Directed dealers should:
• Never use a test light or logic probe when installing this unit. Always use a multimeter.
• Never operate the system in an enclosed or partially enclosed area without ventilation (such as a garage).
• When parking in an enclosed or partially enclosed area or when having the vehicle serviced, the remote start system must
be disabled using the installed toggle switch. It is the user’s sole responsibility to properly handle and keep out of reach from
children all remote controls to assure that the system does not unintentionally remote start the vehicle.
• USER MUST INSTALL A CARBON MONOXIDE DETECTOR IN OR ABOUT THE LIVING AREA ADJACENT TO THE VEHICLE.
ALL DOORS LEADING FROM ADJACENT LIVING AREAS TO THE ENCLOSED OR PARTIALLY ENCLOSED VEHICLE
STORAGE AREA MUST REMAIN CLOSED AT ALL TIMES.
Use of this product in a manner contrary to its intended mode of operation may result in property damage, personal injury, or
death. Except when performing the Safety Check outlined in this installation guide, (1) Never remotely start the vehicle with
the vehicle in gear, and (2) Never remotely start the vehicle with the keys in the ignition. The user is responsible for having the
neutral safety feature of the vehicle periodically checked, wherein the vehicle must not remotely start while the car is in gear.
This testing should be performed by an authorized Directed dealer in accordance with the Safety Check outlined in this product
installation guide. If the vehicle starts in gear, cease remote start operation immediately and consult with the user to fix the problem
immediately.
OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STARTS IN GEAR IS CONTRARY TO ITS INTENDED MODE OF
OPERATION. OPERATING THE REMOTE START SYSTEM UNDER THESE CONDITIONS MAY RESULT IN PROPERTY DAMAGE
OR PERSONAL INJURY. IMMEDIATELY CEASE THE USE OF THE UNIT AND REPAIR OR DISCONNECT THE INSTALLED REMOTE
START MODULE. DIRECTED WILL NOT BE HELD RESPONSIBLE OR PAY FOR INSTALLATION OR REINSTALLATION COSTS.
Remote starters for manual transmission pose significant risks if not properly installed and operated. When testing to ensure the
installation is working properly, only remote start the vehicle in neutral gear, on a flat surface and with a functional, fully engaged
parking brake. Do not allow anyone to stand in front of or behind the vehicle.
This product should not be installed in any convertible vehicles, soft or hard top with a manual transmission. Installation in such
vehicles may pose certain risk.
3Directed Digital Solutions HYUNDAI1
© 2019-11-06 Directed. All rights reserved.

Introduction
The HYUNDAI1 firmware for Directed Digital Solutions is compatible with specific Hyundai and Kia vehicles.
It is a complete solution for remote start, security (if applicable), bypass interface, and convenience. This guide
provides information on the installation of the module using HYUNDAI1. If you would prefer using this system as
a digital solution, go to www.directechs.com and search for the make, model and year of the vehicle. This will
allow you to find the proper firmware and corresponding installation guide.
Warning! This module can only be programmed via the web tool, which can be found on www.directechs.com or using the
Directechs Mobile application for mobile devices. Features and functions will become accessible when you connect the module
using the XKLoader.
Pre-installation and application warnings
Firmware notes: This section highlights important information for this specific firmware and will assist in
pricing accordingly, as well as bringing awareness to any operational or vehicle limitations.
T-Harness
compatible
Keys required for
programming 1Keys required for operation 0
Unless specified otherwise, all connectors are displayed from the wire side, with the exception of the OBDII diagnostic
connector.
Refer to the "Vehicle wiring reference chart" following each installation type.
Takeover feature is NOT available on the Kia Optima. The engine will stop when a door is opened.
General notes: This section highlights important information for this specific firmware.
[1] The installation of an aftermarket hood pin is ONLY required on vehicles that are NOT equipped with a factory hood pin.
[2] The siren is ONLY required when enabling the security features during module flashing.
[3] These vehicles do not support a virtual tach. A tach source from the vehicle must be used.
Additional parts required (maximum required):
6A Diode
2 x 6A Diodes
and 2 x 1A Diodes
86 85
30
87a
87
0 x Relay
Resistor 100Ω
0 x Resistor
Fuse 7.5A
0 x Fuse
4Directed Digital Solutions HYUNDAI1
© 2019-11-06 Directed. All rights reserved.

Vehicle application guide
The following table lists the vehicles and features which are compatible with this product. The number assigned to each year
allows you to determine which installation type should be used for your vehicle.
Vehicles
2015 2014 2013 2012 2011 2010 2009 PK-Immobilizer Bypass-Data No Key Req'd AV-Panic Mode Activation DL-Arm Factory Security DL-Disarm Factory Security DL-Door Lock Control DL-Door Unlock DL-Driver Priority Unlock DL-Trunk / Hatch Release FOB-Control of aftermarket alarm with OEM remote RS-3x LOCK START (Start control using OEM Remote) RS-Remote Start Takeover RS-SmartStart RS-Tach / RPM Output SS-Entry Monitoring ALL Door Pins SS-Entry Monitoring Hood Pin SS-Entry Monitoring Trunk/Hatch Pin ST-Brake Status (foot brake) ST-E-Brake Status ST-Ignition Status
Hyundai
Genesis (Smart Key) 11111 •••••••••••••••••••
Genesis Coupe (Smart Key) 666222
•••••••••••••••••••
Sonata (Smart Key) 3333 •••••••••••••••••••
Sonata Hybrid 33333 •••••••••••••••••••
Kia
Magentis (Smart Key) 4
•••••••••••••••••••
Optima (Smart Key) 4•••••••••••••••••••
Sorento (Smart Key) 555 •••••••••••••••••••
Legend:
AV: Horn & Light Controls
DL: OE Door Lock & Alarm Controls
FOB: Sync CAN Interface w/ FOB Remote
PK: Transponder & Immobilizer Override
RS: Remote Start & Engine Controls
SS: Integrated Security & Monitoring
ST: Function/Feature Status
5Directed Digital Solutions HYUNDAI1
© 2019-11-06 Directed. All rights reserved.

Wiring connections
The wiring connections listed below are specific to this firmware.
Main power harness (H1), 12-pin thick gauge connector
Conn./Pin Color Description
H1/1 White Relay 3 COM – (+) Brake or (-) Clutch Output 1
H1/2 White/Brown Relay 3 N.O. – (+) 12V Input1
H1/3 Brown/Red Relay 2 N.O.– (+) 12V Input
H1/4 Yellow/Red Relay 2 COM – (+) Parking Light Output
H1/5 Orange/Red Relay 2 N.C. – No Connection
H1/6 Yellow Relay 1 COM – (+) Push-To-Start Output 1
H1/7 White Relay 3 COM – (+) Brake or (-) Clutch Output 1
H1/8 White/Brown Relay 3 N.O. – (+) 12V Input 1
H1/9 Black (-) Ground
H1/10 Red (+) 12V Input
H1/11 Orange/Yellow Relay 1 N.C. – No Connection 1
H1/12 Brown Relay 1 N.O. – (+) 12V Input 1
Auxiliary output harness (H2), 16-pin black connector
Conn./Pin Color Description
H2/1 Violet/Brown No Connection
H2/2 Yellow/Black (-) Keysense Output
H2/3 Orange/Black No Connection
H2/4 Tan HS CAN 1 Low
H2/5 Tan/Black HS CAN 1 High
H2/6 Light Green No Connection
H2/7 Orange/Green HS CAN 2 High
H2/8 Orange/Brown HS CAN 2 Low
H2/9 Violet/Green No Connection
H2/10 Green/Black (-) Parking Lights Output 2
H2/11 White/Violet No Connection 2
H2/12 White/Red No Connection 2
H2/13 Lt. Blue/Black (-) RAP Off Output 2
H2/14 Green/Red No Connection 2
H2/15 N/A No Connection
H2/16 Violet/Yellow No Connection
1. If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed.
2. If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed. Note that they are low current and a relay
may be necessary.
6Directed Digital Solutions HYUNDAI1
© 2019-11-06 Directed. All rights reserved.

Analog harness (H3), 18-pin white connector
Conn./Pin Color Description
H3/1 Lt. Blue/Red No Connection
H3/2 Black/White (-) Parking Brake Input (manual transmission) 2
H3/3 Gray (-) Hood Input 2
H3/4 N/A No Connection
H3/5 Gray/Black (+) Ignition Input 2
H3/6 Violet/White (AC) Tach Input 2
H3/7 Dark Blue No Connection 1
H3/8 Brown/Black (-) Horn 1
H3/9 Red/White No Connection 1
H3/10 White/Green (-) Door Input 2
H3/11 Yellow/Green (+) Door Input 2
H3/12 Blue/Red No Connection
H3/13 Light Blue (-) Trunk Trigger Input 2
H3/14 Pink/Yellow (-) Activation (start) Input
H3/15 Dark Green No Connection 1
H3/16 Brown/White (+) Brake Input 2
H3/17 Brown (+) Siren Output 1
H3/18 Blue/White (-) Ground When Running (status) Output 1
MC501 harness (H4), 8 thick-gauge wires (optional)
Conn./Pin Color Description
H4/1 Pink/White (+) Ignition 2/Flex Relay Output 3
H4/2 Red/White (+) Fused (30A) Ignition 2/Flex Relay Input
H4/3 Pink (+) Ignition Output (also input to Yellow in ribbon cable)
H4/4 Red (+) 12 Volt (battery) Input
H4/5 Orange (+) Accessory Output
H4/6 Red (+) 12 Volt (battery) Input
H4/7 Green Starter Input (from key switch) 4
H4/8 Violet (+) Starter Output (to starter)
1. If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed. Note that they are low current and a relay
may be necessary.
2. These connections are only required if the corresponding statuses are not supported by the firmware. See "Vehicle application guide" on page 5 for a
list of compatible features.
7Directed Digital Solutions HYUNDAI1
© 2019-11-06 Directed. All rights reserved.

Installation (wiring diagrams & vehicle wiring reference charts)
Type 1
Refer to "Pre-installation and application warnings" on page 4 for important information, such as the description of each special note referenced in the diagram ( ).
HS CAN 2 High: Orange/Green: 7
(+) 12V:
White, pin 1
HS CAN 1 Low: Tan: 4
HS CAN 1 High: Tan/Black: 5
HS CAN 2 Low: Orange/Brown: 8
(-) Keysense Output: Yellow/Black: 2
(+) Brake: Gray or
White/Orange, pin 1
Brake
Pedal
C-CAN High: Orange, pin 6
C-CAN Low: Green, pin 14
(+) Ignition Input: Gray/Black: 5
(AC) Tach Input: Violet/White: 6
The Remote Start
Safety Override
Switch MUST be in
the ON position.
Remote Start Safety
Override Switch
9: Black: (-) Ground
10: Red: (+) 12V Input
3: Brown/Red: (+) 12V Input
4: Yellow/Red: (+) Parking Lights Output
1 & 7: White: (+) Brake Activation Output
2 & 8: White/Brown: (+) 12V Input
Driver’s Dash Fuse Box
(white connector - B)
6 Amp
Diodes
(+) Right Parking Light:
White, pin 1
(+) Left Parking Light:
Brown, pin 2
1
OBDll Diagnostic
(connector side view)
Siren
Hood Pin
(+) Siren Output: Brown: 17
(-) Hood Input: Gray: 3 12: Brown: (+) 12V Input
6: Yellow: (+) PTS Output
Junction Connector
(black connector in passenger kick panel) Start/Stop Button Switch
(black connector)
1 A Diodes
(+) PTS 1:
Orange/Black, pin 1 (+) PTS 2: White, pin 7
12345
678 9 10
(-) Keysense: Orange, pin 12
B-CAN High: Brown, pin 11
B-CAN Low: White, pin 10
PDM - Power Distribution Module
(white connector right of steering column)
(+) Ignition: Yellow/Black, pin 9
(AC) Tachometer:
Yellow/Orange, pin 25
EM31
(white connector in driver’s kick panel)
1 2 3 4 5 6 7 8
14 15 16 17
23 24 25 26
9
18
27
10 11 12 13
19 20 21 22
28 29 30 31
Refer to www.directechs.com for
alternative brake connections.
8Directed Digital Solutions HYUNDAI1
© 2019-11-06 Directed. All rights reserved.

Vehicle wiring reference chart
This section provides vehicle wiring information to guide you through the various stages of your installation. Refer to
www.directechs.com for additional information.
Wire Information Connector Information
Function Color Pin Polarity Location Color Pins Ref.
Hyundai Genesis (Smart Key) 2009-2013
12 Volts White 1 (+) Driver's Dash Drivers fuse box, connector (B). White 1 A
Ignition Yellow/Black 9 (+) (PDM) Power Distribution Module right of steering column. Black 10 B
PTS 1 Orange/Black 1 (+) Start/Stop switch. Black 10 C
PTS 2 White 7 (+) Start/Stop switch. Black 10 C
Keysense Orange 12 (-) Power Distribution Module right of steering column. White 20 B
C-CAN High Orange 6 Data OBDll. Black 16 E
C-CAN Low Green 14 Data OBDll. Black 16 E
B-CAN High Brown 11 Data Power Distribution Module right of steering column. White 20 B
B-CAN Low White 10 Data Power Distribution Module right of steering column. White 20 B
Parking Lights (Left) Brown 2 (+) Passenger kick panel, junction connector. Black 21 D
Parking Lights (Right) White 1 (+) Passenger kick panel, junction connector. Black 21 D
Brake Gray 1 (+) Brake pedal switch. White 4 F
Tach Yellow/Orange 25 (AC) Driver's kick panel. White 31 G
9Directed Digital Solutions HYUNDAI1
© 2019-11-06 Directed. All rights reserved.

Type 2a - Automatic Transmission
Refer to "Pre-installation and application warnings" on page 4 for important information, such as the description of each special note referenced in the diagram ( ).
(+) Siren Output: Brown: 17
(-) Hood Input: Gray: 3
Siren
(+) Ignition Sense Input: Gray/Black: 5
The Remote Start
Safety Override
Switch MUST be in
the ON position.
Remote Start Safety
Override Switch
(-) Keysense Output: Yellow/Black: 2
10: Red: (+) 12V Input
12: Brown: (+) 12V Input
6: Yellow: (+) PTS Output
2 & 8: White/Brown: (+) 12V Input
9: Black: (-) Ground
4: Yellow/Red: (+) Parking Light Output
3: Brown/Red: (+) 12V Input
Driver’s Kick Panel
(blue connector)
1 2 3 4
18
32
5
19
33
6
20
34
7
21
35
8
22
36
9
23
37
10
24
38
15 16 17
29 30 31
11 12 13
25 26 27
39 40 41
14
28
42
(+) 12V:
Red, pin 1
Dash Fuse Box
(brown, rear connector - K)
1
1 Amp
Diodes
(+) PTS 1:
Blue, pin 1
(+) PTS 2:
Pink or Pink/Black, pin 7
12345
678 9 10
Start/Stop Button Switch
(black connector)
(+) Ignition:
Blue/Orange, pin 7
PDM - Power
Distribution Module
(black connector,
right of steering column)
65 78 9 10
1 2 3 4
(-) Hood: Yellow, pin 31
(-) E-Brake Input: Black/White: 2
123
67 8 910 11 12 13 14
4 5
Dash Fuse Box
(blue, rear connector - G)
6 Amp Diodes
(+) Parking Lights (right):
Blue or Gray, pin 3
(+) Parking
Lights (left):
Blue, pin 6
HS CAN 2 High: Orange/Green: 7
HS CAN 1 Low: Tan: 4
HS CAN 1 High: Tan/Black: 5
HS CAN 2 Low: Orange/Brown: 8
C-CAN High: Red, pin 6
C-CAN Low: Blue, pin 14
OBDll Diagnostic
(connector side view)
(-) Keysense: Red, pin 12
B-CAN High: Red, pin 11
B-CAN Low: Blue, pin 10
PDM - Power Distribution Module
(white connector right of steering column)
(AC) Tachometer: White/Orange, pin 16
(AC) Tach Input: Violet/White: 6
(+) Brake: Red/Orange, pin 2
Junction connector
(white connector in driver’s kick panel)
123 4 5 6 7 8 9 10 11
12 13 14 15 16 17 18 19 20 21 22
1 & 7: White: (+) Brake Output
10 Directed Digital Solutions HYUNDAI1
© 2019-11-06 Directed. All rights reserved.

Type 2b - Manual Transmission
Refer to "Pre-installation and application warnings" on page 4 for important information, such as the description of each special note referenced in the diagram ( ).
(+) Siren Output: Brown: 17
(-) Hood Input: Gray: 3
Siren
(+) Ignition Sense Input: Gray/Black: 5
The Remote Start
Safety Override
Switch MUST be in
the ON position.
Remote Start Safety
Override Switch
(-) Keysense Output: Yellow/Black: 2
10: Red: (+) 12V Input
12: Brown: (+) 12V Input
6: Yellow: (+) PTS Output
2 & 8: White/Brown: (+) 12V Input
9: Black: (-) Ground
4: Yellow/Red: (+) Parking Light Output
3: Brown/Red: (+) 12V Input
Driver’s Kick Panel
(blue connector)
1 2 3 4
18
32
5
19
33
6
20
34
7
21
35
8
22
36
9
23
37
10
24
38
15 16 17
29 30 31
11 12 13
25 26 27
39 40 41
14
28
42
(+) 12V:
Red, pin 1
Dash Fuse Box
(brown, rear connector - K)
1 Amp
Diodes
(+) PTS 1:
Blue, pin 1
(+) PTS 2:
Pink or Pink/Black, pin 7
12345
678 9 10
Start/Stop Button Switch
(black connector)
(+) Ignition:
Blue/Orange, pin 7
PDM - Power
Distribution Module
(black connector,
right of steering column)
65 78 9 10
1 2 3 4
(-) Hood: Yellow, pin 31
(-) E-Brake Input: Black/White: 2
123
67 8 910 11 12 13 14
45
Dash Fuse Box
(blue, rear connector - G)
6 Amp Diodes
(+) Parking Lights (right):
Blue or Gray, pin 3
(+) Parking
Lights (left):
Blue, pin 6
(-) E-Brake:
Brown/Orange,
pin 4
HS CAN 2 High: Orange/Green: 7
HS CAN 1 Low: Tan: 4
HS CAN 1 High: Tan/Black: 5
HS CAN 2 Low: Orange/Brown: 8
C-CAN High: Red, pin 6
C-CAN Low: Blue, pin 14
OBDll Diagnostic
(connector side view)
(-) Keysense: Red, pin 12
B-CAN High: Red, pin 11
B-CAN Low: Blue, pin 10
PDM - Power Distribution Module
(white connector right of steering column)
(AC) Tachometer: White/Orange, pin 16
(AC) Tach Input: Violet/White: 6
1 & 7: White: (-) Clutch Output
Clutch Pedal
(-) Clutch:
Green, pin 1
1
11 Directed Digital Solutions HYUNDAI1
© 2019-11-06 Directed. All rights reserved.

Vehicle wiring reference chart
This section provides vehicle wiring information to guide you through the various stages of your installation. Refer to
www.directechs.com for additional information.
Wire Information Connector Information
Function Color Pin Polarity Location Color Pins Ref.
Hyundai Genesis Coupe (Smart Key) 2010-2012
12 Volts Red 1 (+) Dash fuse box, rear, connector (K). Brown 1 A
Ignition Blue/Orange 7 (+) (PDM) Power Distribution Module right of column. Black 10 B
PTS 1 Blue 1 (+) Start/Stop button switch. Black 10 C
PTS 2 Pink or Pink/Black 7 (+) Start/Stop button switch. Black 10 C
Keysense Red 12 (-) Power Distribution Module right of column. White 20 D
C-CAN High Red 6 Data OBDll. Black 16 E
C-CAN Low Blue 14 Data OBDll. Black 16 E
B-CAN High Red 11 Data Power Distribution Module right of column. White 20 D
B-CAN Low Blue 10 Data Power Distribution Module right of column. White 20 D
Parking Lights (Left) Blue 6 (+) Dash fuse box, rear, connector (G). Blue 14 G
Parking Lights (Right) Blue or Gray 3 (+) Dash fuse box, rear, connector (G). Blue 14 G
Hood pin Yellow 31 (-) Drivers kick panel, junction connector. Blue 42 H
Clutch Green 1 (-) Clutch pedal. White 2 I
Brake Red/Orange 2 (+) Drivers kick panel, junction connector. White 22 F
E-Brake Brown/Orange 4 (-) Dash fuse box, rear, connector (G). Blue 14 G
Tach White/Orange 16 (AC) Power Distribution Module right of column. White 20 D
12 Directed Digital Solutions HYUNDAI1
© 2019-11-06 Directed. All rights reserved.

Type 3
Refer to "Pre-installation and application warnings" on page 4 for important information, such as the description of each special note referenced in the diagram ( ).
OBDII Diagnostic
(connector side view)
C-CAN High: White, pin 6
C-CAN Low: Yellow or
Brown, pin 14
B-CAN Low:
Yellow/Orange
or Orange, pin 11
B-CAN High:
White/Orange
or Blue, pin 12
(-) Keysense: Yellow or
Orange/Black, pin 41
(-) Keysense:
Yellow, pin 47
(+) Ignition Input: Gray/Black: 5
(-) Keysense Output: Yellow/Black: 2
10: Red: (+) 12V Input
12: Brown: (+) 12V Input
1 & 7: White: (+) Brake Activation Output
2 & 8: White/Brown: (+)12V Input
9: Black: (-) Ground
6: Yellow: (+) PTS Output
Siren
Hood Pin
(+) Siren Output: Brown: 17
(-) Hood Input: Gray: 3
(Gasoline)
OR
(Hybrid)
(+) 12V, Red,
pin 2
Dash Fuse Box
(black connector - C)
3
21
Junction Connector
(white connector in
passenger kick panel or
driver’s kick panel for hybrid)
Dash Fuse Box
(connector - F)
Driver’s Side
Dash Fuse Box
(yellow - front view)
(+) Ignition:
Pink, pin 14
27
28 15 2
32 19 6
30 17 4
34 21 8
37 24 11
29 16 3
33 20 7
36 23 10
31 18 5
35 22 9
38 25 12
39
14
26
1
13
Dash Fuse Box
(black connector - G) Start/Stop Button Switch
(black connector)
1 Amp
Diodes
(+) PTS 1:
Yellow/Black,
pin 1
(+) PTS 2:
Yellow/Orange, pin 7
12345
678 9 10
(+) Brake, Green
or Green/Orange,
pin 1
Brake Pedal
(-) Parking Lights Output: Green/Black: 10
(-) Parking Lights, Pink, pin 22
BCM
(above gas pedal)
BCM
(gray connector above gas pedal)
HS CAN 2 High: Orange/Green: 7
HS CAN 1 Low: Tan: 4
HS CAN 1 High: Tan/Black: 5
HS CAN 2 Low: Orange/Brown: 8
(AC) Tach Input: Violet/White: 6
The Remote Start Safety
Override Switch MUST
be in the ON position.
EM11
(white 43-pin connector in driver’s kick)
Hybrid Tachometer:
Green/Black, pin 4
Gasoline Tachometer:
Green, pin 39
39383736
43424140
5 6
14 15
23 24
32 33
7 8 9
18
27
16 17
25 26
34 35
31302928
22212019
13121110
4321
Gasoline
Hybrid
OR
13 Directed Digital Solutions HYUNDAI1
© 2019-11-06 Directed. All rights reserved.

Vehicle wiring reference chart
This section provides vehicle wiring information to guide you through the various stages of your installation. Refer to
www.directechs.com for additional information.
Wire Information Connector Information
Function Color Pin Polarity Location Color Pins Ref.
Hyundai Sonata (Smart Key) 2011-2014
12V Red 2 (+) Dash fuse box, connector (C). Black 3 C
Ignition Pink 14 (+) Dash fuse box, rear connector (E). Black 39 E
PTS 1 Yellow/Black 1 (+) Start/Stop button switch. Black 10 A
PTS 2 Yellow/Orange 7 (+) Start/Stop button switch. Black 10 A
Keysense Yellow or Orange/Black 41 (-) Passenger kick panel, junction connector. White 56 B
C-CAN High White 6 Data OBDll. Black 16 D
C-CAN Low Yellow 14 Data OBDll. Black 16 D
B-CAN High White/Orange 12 Data Dash fuse box rear, connector (F). White 24 F
B-CAN Low Yellow/Orange 11 Data Dash fuse box rear, connector (F). White 24 F
Parking Lights Pink 22 (-) BCM above gas pedal. Gray 24 G
Brake Green 1 (+) Brake switch. White 4 H
Tach Green 39 (AC) Driver's kick panel White 43 J
Hyundai Sonata Hybrid 2011-2015
12V Red 2 (+) Dash fuse box, connector (C). Black 3 C
Ignition Pink 14 (+) Dash fuse box rear, connector (E). Black 39 E
PTS 1 Yellow/Black 1 (+) Start/Stop button switch. Black 10 A
PTS 2 Yellow/Orange 7 (+) Start/Stop button switch. Black 10 A
Keysense Yellow 47 (-) Drivers kick panel, junction connector. White 56 I
C-CAN High White 6 Data OBDll. Black 16 D
C-CAN Low Brown 14 Data OBDll. Black 16 D
B-CAN High Blue 12 Data Dash fuse box rear, connector (F). White 24 F
B-CAN Low Orange 11 Data Dash fuse box rear, connector (F). White 24 F
Parking Lights Pink 22 (-) BCM above gas pedal. Gray 24 G
Brake Green/Orange 1 (+) Brake switch. White 4 H
Tach Green 39 (AC) Driver's kick panel White 43 J
14 Directed Digital Solutions HYUNDAI1
© 2019-11-06 Directed. All rights reserved.

Type 4
Refer to "Pre-installation and application warnings" on page 4 for important information, such as the description of each special note referenced in the diagram ( ).
OBDll Diagnostic
(connector side view)
C-CAN High: White, pin 6
C-CAN Low: Black, pin 14
BCM
(above brake pedal)
Remote Start Safety
Override Switch
(+) Ignition Input: Gray/Black: 5
(-) RAP Off Output: Lt. Blue/Black: 13
(-) Keysense Output: Yellow/Black: 2
9: Black: (-) Ground
10: Red: (+) 12V Input
12: Brown: (+) 12V Input
6: Yellow: (+) PTS Output
1 & 7: White: (+) Brake Activation Output
2 & 8: White/Brown: (+) 12V Input
The Remote Start
Safety Override
Switch MUST be in
the ON position.
Siren
(+) Siren Output: Brown: 17
(-) Hood Input: Gray: 3
(-) Parking Lights:
Yellow/Black, pin 4
Hood:
Yellow/Black, pin 13
B
BCM
(white connector left of
steering column - B)
(-) Parking Lights Output: Green/Black: 10
Key FOB Holder
(white connector
in center console)
(-) Keysense:
Orange, pin 9
12345
678910
(-) Drivers Door Trigger:
Orange/Black,
pin 10
678910 11 12
123 45
Dash Fuse Box
(rear, brown connector - L)
B-CAN High: White, pin 5
B-CAN Low: Black, pin 15
C
BCM
(white connector left of steering column - C)
1234 5
6789 10
(+) Ignition:
Green, pin 8
Relay Box
(white connector behind start/stop button switch)
Junction Connector
(white connector in
driver’s kick panel)
(+) Brake:
Red, pin 5
123 6 7 45
8 9 10 13 14 11 12
34
21
78
65
(+) 12V: Pink, pin 2
Junction Connector
(white connector in driver’s kick)
Start/Stop Button Switch
(black connector)
1 Amp Diodes
(+) PTS 1:
Orange/Black, pin 1
(+) PTS 2:
White/Orange, pin 7
12345
678 9 10
HS CAN 2 High: Orange/Green: 7
HS CAN 1 Low: Tan: 4
HS CAN 1 High: Tan/Black: 5
HS CAN 2 Low: Orange/Brown: 8
(AC) Tach Input: Violet/White: 6
(AC) Tachometer: Yellow/Black, pin 5
23
5
EM 31
(white 33-pin connector in driver’s kick panel)
15 Directed Digital Solutions HYUNDAI1
© 2019-11-06 Directed. All rights reserved.

Vehicle wiring reference chart
This section provides vehicle wiring information to guide you through the various stages of your installation. Refer to
www.directechs.com for additional information.
Wire Information Connector Information
Function Color Pin Polarity Location Color Pins Ref.
Kia Magentis (Smart Key) 2010
12 Volts Pink 2 (+) Drivers kick panel, junction connector. White 8 A
Ignition Green 8 (+) Relay box behind start/stop button switch. White 10 B
PTS 1 Orange/Black 1 (+) Start/Stop switch. Black 10 C
PTS 2 White/Orange 7 (+) Start/Stop switch. Black 10 C
Keysense Orange 9 (-) Key FOB holder in center console. White 10 D
C-CAN High White 6 Data OBDll. Black 16 E
C-CAN Low Black 14 Data OBDll. Black 16 E
B-CAN High White 5 Data BCM left of steering column. Gray 18 F
B-CAN Low Black 15 Data BCM left of steering column. Gray 18 F
Parking Lights Yellow/Black 4 (-) BCM left of steering column. White 20 G
Driver Door Trigger Orange/Black 10 (-) Dash fuse box rear, connector (L). Brown 12 H
Hood Pin Yellow/Black 13 (-) BCM left of steering column. White 20 G
Brake Red 5 (+) Drivers kick panel, junction connector. White 14 J
Tach Yellow/Black 5 (AC) Driver's kick panel. White 33 K
Kia Optima (Smart Key) 2010
12 Volts Pink 2 (+) Drivers kick panel, junction connector. White 8 A
Ignition Green 8 (+) Relay box behind start/stop button switch. White 10 B
PTS 1 Orange/Black 1 (+) Start/Stop switch. Black 10 C
PTS 2 White/Orange 7 (+) Start/Stop switch. Black 10 C
Keysense Orange 9 (-) Key FOB holder in center console. White 10 D
C-CAN High White 6 Data OBDll. Black 16 E
C-CAN Low Black 14 Data OBDll. Black 16 E
B-CAN High White 5 Data BCM left of steering column. Gray 18 F
B-CAN Low Black 15 Data BCM left of steering column. Gray 18 F
Parking Lights Yellow/Black 4 (-) BCM left of steering column. White 20 G
Driver Door Trigger Orange/Black 10 (-) Dash fuse box rear, connector (L). Brown 12 H
Hood Pin Yellow/Black 13 (-) BCM left of steering column. White 20 G
Brake Red 5 (+) Drivers kick panel, junction connector. White 14 J
Tach Yellow/Black 5 (AC) Driver's kick panel. White 33 K
16 Directed Digital Solutions HYUNDAI1
© 2019-11-06 Directed. All rights reserved.

Type 5
Refer to "Pre-installation and application warnings" on page 4 for important information, such as the description of each special note referenced in the diagram ( ).
C-CAN High: White, pin 6
C-CAN Low: Red, pin 14
(-) Keysense: Red or
Red/Orange, pin 8
B-CAN High:
Blue, pin 5
B-CAN Low:
Red, pin 6
OBDII Diagnostic
(connector side view)
Siren
Remote Start Safety
Override Switch
(+) Ignition Input: Gray/Black: 5
(-) Keysense Output: Yellow/Black: 2
(-) RAP Off Output: Lt. Blue/Black: 13
9: Black: (-) Ground
10: Red: (+) 12V Input
12: Brown: (+) 12V Input
6: Yellow: (+) PTS Output
1 & 7: White: (+) Brake Activation Output
2 & 8: White/Brown: (+) 12V Input
16 9
1568 2347
101112131415
The Remote Start
Safety Override
Switch MUST be in
the ON position.
(+) Siren Output: Brown: 17
(-) Hood Input: Gray: 3
Dash Fuse Box
(rear, white connector - MM)
(-) Parking Lights Output: Green/Black: 10
Dash Fuse Box
(white connector - FK)
(-) Driver Door Trigger:
Green/Orange, pin 10
14
1 7
7
2 0
1 2
1 4 2 5
25
1 8
8
2 1
1 0
2 3
1 3
1 5 2 6
36
1 9
9
2 2
1 1
2 4
1 6
(-) Parking Lights:
Blue, pin 2
Headlight Switch
(white connector)
123 4 5 6 7 8 9 10 111213
Dash Fuse Box
(white connector - C)
(+) Ignition:
Green, pin 3
34
21
78
65
(-) Hood: Red/Black, pin 16
Dash Fuse Box
(white connector - F)
Brake Pedal
(+) Brake, Yellow or
Green/Black, pin 1
(+)12V: Red, pin 11
Junction Connector
(white connector in driver’s kick panel)
1 2 3 4
9 10 11 1
5 6 7 8
13 14 15
1 Amp
Diodes
(+) PTS 1:
Black/Orange, pin 1
(+) PTS 2:
Pink, pin 7
12345
678 9 10
Start/Stop Button Switch
(black connector)
HS CAN 2 High: Orange/Green: 7
HS CAN 1 Low: Tan: 4
HS CAN 1 High: Tan/Black: 5
HS CAN 2 Low: Orange/Brown: 8
(AC) Tach Input: Violet/White: 6
MC 31
(brown connector in passenger kick panel)
12345 6 7 8 9 10 11
12 13 14 15 16 17 18 19 20 21 22 23 24
(AC) Tachometer:
Blue/Orange, pin 4
17 Directed Digital Solutions HYUNDAI1
© 2019-11-06 Directed. All rights reserved.

Vehicle wiring reference chart
This section provides vehicle wiring information to guide you through the various stages of your installation. Refer to
www.directechs.com for additional information.
Wire Information Connector Information
Function Color Pin Polarity Location Color Pins Ref.
Kia Sorento (Smart Key) 2010-2013
12 Volts Red 11 (+) Drivers kick panel, junction connector. White 15 A
Ignition Green 3 (+) Dash fuse box, connector (C). White 8 B
PTS 1 Black/Orange 1 (+) Start/Stop button switch. Black 10 C
PTS 2 Pink 7 (+) Start/Stop button switch. Black 10 C
Keysense Red or Red/Orange 8 (-) Dash fuse box, rear conn. (MM). White 16 D
C-CAN High White 6 Data OBDll. Black 16 E
C-CAN Low Red 14 Data OBDll. Black 16 E
B-CAN High Blue 5 Data Dash fuse box, rear connector (MM). White 16 D
B-CAN Low Red 6 Data Dash fuse box, rear connector (MM). White 16 D
Parking Lights Blue 2 (-) Headlight switch. White 13 F
Driver Door Trigger Green/Orange 10 (-) Drivers fuse box, connector (FK). White 26 G
Hood Pin Red/Black 16 (-) Drivers fuse box, connector (F). Red 20 H
Brake Yellow or Green/Black 1 (+) Brake switch. White 4 I
Tach Blue/Orange 4 (AC) Passenger kick panel. Brown 24 J
18 Directed Digital Solutions HYUNDAI1
© 2019-11-06 Directed. All rights reserved.

Type 6a - Automatic Transmission
Refer to "Pre-installation and application warnings" on page 4 for important information, such as the description of each special note referenced in the diagram ( ).
C-CAN High: Red, pin 6
(-) Keysense: Pink, pin 12
OBDll Diagnostic
(connector side view)
Siren
C-CAN Low: Blue, pin 14
Hood Pin
Remote Start Safety
Override Switch
(+) Siren Output: Brown: 17
(-) Hood Input: Gray: 3
(+) Ignition Input: Gray/Black: 5
(-) Keysense Output: Yellow/Black: 2
9: Black: (-) Ground
10: Red: (+)12V Input
1 & 7: White:
(+) Brake Activation Output
2 & 8: White/Brown: (+) 12V Input
The Remote Start
Safety Override
Switch MUST be in
the ON position.
6: Yellow: (+) PTS Output
12: Brown: (+)12V Input
Driver’s Dash Fuse Box
(yellow box at driver side dash, rear view)
D
E
B-CAN Low:
Blue, pin 16
B-CAN High:
Red, pin 15
Dash Fuse Box
(rear white connector - D)
D
PDM - Power Distribution Module
(white connector right of column) PDM:
Power
Distribution
Module
(right of
steering column)
(-) Parking Lights: Yellow, pin 1
(-) Parking Lights Output: Green/Black: 10
Headlight Switch
(white connector)
12 3 4 5 6 7 8 9 10 111213
(+) Ignition:
Blue/Orange, pin 7
PDM - Power
Distribution Module
(white connector right of column)
65 78 9 10
1 2 3 4
Start/Stop Button Switch
(black connector)
(+) PTS 1:
Blue, pin 1
(+) PTS 2:
Pink/Black, pin 7
12345
678 9 10
(+) Brake: Red/Black, pin 4
Junction Connector
(blue connector in driver’s kick panel)
1 2 3 4
18
32
5
19
33
6
20
34
7
21
35
8
22
36
9
23
37
10
24
38
15 16 17
29 30 31
11 12 13
25 26 27
39 40 41
14
28
42
E
(+) 12V: Green, pin 29
29
1
19
2
11
3 4 5 6 7 8 9
18
171615141312
21 22 23 24 25 26 27
37
363534333231
10
28
38
20
30
Dash Fuse Box
(rear, white connector - E)
HS CAN 2 High: Orange/Green: 7
HS CAN 1 Low: Tan: 4
HS CAN 1 High: Tan/Black: 5
HS CAN 2 Low: Orange/Brown: 8
(AC) Tach Input: Violet/White: 6
(AC) Tachometer:
Gray, pin 16
1 Amp
Diodes
19 Directed Digital Solutions HYUNDAI1
© 2019-11-06 Directed. All rights reserved.

Type 6b - Manual Transmission
Refer to "Pre-installation and application warnings" on page 4 for important information, such as the description of each special note referenced in the diagram ( ).
C-CAN High: Red, pin 6
(-) Keysense: Pink, pin 12
OBDll Diagnostic
(connector side view)
Siren
C-CAN Low: Blue, pin 14
Hood Pin
Remote Start Safety
Override Switch
(+) Siren Output: Brown: 17
(-) Hood Input: Gray: 3
(+) Ignition Input: Gray/Black: 5
(-) Keysense Output: Yellow/Black: 2
9: Black: (-) Ground
10: Red: (+)12V Input
2 & 8: White/Brown: (+) 12V Input
The Remote Start
Safety Override
Switch MUST be in
the ON position.
6: Yellow: (+) PTS Output
12: Brown: (+)12V Input
Driver’s Dash Fuse Box
(yellow box at driver side dash, rear view)
D
E
B-CAN Low:
Blue, pin 16
B-CAN High:
Red, pin 15
Dash Fuse Box
(rear white connector - D)
D
PDM - Power Distribution Module
(white connector right of column) PDM:
Power
Distribution
Module
(right of
steering column)
(-) Parking Lights: Yellow, pin 1
(-) Parking Lights Output: Green/Black: 10
Headlight Switch
(white connector)
12 3 4 5 6 7 8 9 10 111213
(+) Ignition:
Blue/Orange, pin 7
PDM - Power
Distribution Module
(white connector right of column)
65 78 9 10
1 2 3 4
Start/Stop Button Switch
(black connector)
(+) PTS 1:
Blue, pin 1
(+) PTS 2:
Pink/Black, pin 7
12345
678 9 10
E
(+) 12V: Green, pin 29
29
1
19
2
11
3 4 5 6 7 8 9
18
171615141312
21 22 23 24 25 26 27
37
363534333231
10
28
38
20
30
Dash Fuse Box
(rear, white connector - E)
HS CAN 2 High: Orange/Green: 7
HS CAN 1 Low: Tan: 4
HS CAN 1 High: Tan/Black: 5
HS CAN 2 Low: Orange/Brown: 8
(AC) Tach Input: Violet/White: 6
(AC) Tachometer:
Gray, pin 16
1 Amp
Diodes
1 & 7: White:
(-) Clutch Output
Clutch Pedal
(-) Clutch: Green, pin 1
(-) E-Brake Input: Black/White: 2
G
1234567891011121314
1516171819202122232425262728
(-) E-Brake:
Brown/Orange, pin 22
Dash Fuse Box
(white connector, plug G)
G
20 Directed Digital Solutions HYUNDAI1
© 2019-11-06 Directed. All rights reserved.