Directed DS4+ User manual

TL11
INSTALLATION GUIDE
This product is intended for installation by a professional installer only! Attempts to install this
product by a person other than a trained professional may result in severe damage to a vehicle’s
electrical system and components.
2017-11-27
© 2017 Directed, Vista CA
DS4+
Designed by Installers for Installers

Contents
Warning! Safety first ....................................................................................................................... 3
Introduction .................................................................................................................................... 4
Pre-installation and application warnings ..................................................................................... 4
Vehicle application guide........................................................................................................... 5
Wiring connections ......................................................................................................................... 6
Main harness (H1), 12-pin black connector .................................................................................. 6
Relay harness (H2), 10-pin white connector.................................................................................. 6
Data harness (H3), 8-pin white connector..................................................................................... 6
Analog input/output harness (H4), 22-pin white connector............................................................. 7
RF Port harness (H5), 2-pin white connector.................................................................................. 7
D2D harness (H6), 4-pin white (1) and black (2) connectors ........................................................... 7
Temperature sensor harness (H7), 2-pin black connector (optional, 8556T)....................................... 7
Installation (wiring diagrams, fuse selection & vehicle wiring reference charts)........................................ 8
Type 1 ..................................................................................................................................... 8
Type 2 ................................................................................................................................... 12
Type 3 ................................................................................................................................... 14
Configuring the system................................................................................................................... 27
Important! .............................................................................................................................. 27
Vehicles equipped with a manual transmission............................................................................ 27
RF Systems ............................................................................................................................. 27
8504D Combo Sensor............................................................................................................. 27
When used in conjunction with SmartStart.................................................................................. 27
D2D port configuration ............................................................................................................ 28
Module programming.............................................................................................................. 28
LED diagnostics and troubleshooting.......................................................................................... 30
Soft reset................................................................................................................................ 32
Hard reset .............................................................................................................................. 32
Learning the Tach (not needed with Virtual Tach) ............................................................................... 33
Initializing Virtual Tach (not needed with hardwired or data tach applications) ..................................... 33
Limited lifetime consumer warranty .................................................................................................. 34
Quick Reference Guide.................................................................................................................. 35

Warning! Safety first
The following safety warnings must be observed at all times:
• Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer.
• When properly installed, this system can start the vehicle via a command signal from the remote control. Therefore, never
operate the system in an area that does not have adequate ventilation.
The following precautions are the sole responsibility of the user; however, authorized Directed dealers should:
• Never use a test light or logic probe when installing this unit. Always use a multimeter.
• Never operate the system in an enclosed or partially enclosed area without ventilation (such as a garage).
• USER MUST INSTALL A CARBON MONOXIDE DETECTOR IN OR ABOUT THE LIVING AREA ADJACENT TO THE VEHICLE.
ALL DOORS LEADING FROM ADJACENT LIVING AREAS TO THE ENCLOSED OR PARTIALLY ENCLOSED VEHICLE
STORAGE AREA MUST REMAIN CLOSED AT ALL TIMES.
Use of this product in a manner contrary to its intended mode of operation may result in property damage, personal injury, or
death. Except when performing the Safety Check outlined in this installation guide, (1) Never remotely start the vehicle with
the vehicle in gear, and (2) Never remotely start the vehicle with the keys in the ignition. The user is responsible for having the
neutral safety feature of the vehicle periodically checked, wherein the vehicle must not remotely start while the car is in gear.
This testing should be performed by an authorized Directed dealer in accordance with the Safety Check outlined in this product
installation guide. If the vehicle starts in gear, cease remote start operation immediately and consult with the user to fix the problem
immediately.
OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STARTS IN GEAR IS CONTRARY TO ITS INTENDED MODE OF
OPERATION. OPERATING THE REMOTE START SYSTEM UNDER THESE CONDITIONS MAY RESULT IN PROPERTY DAMAGE
OR PERSONAL INJURY. IMMEDIATELY CEASE THE USE OF THE UNIT AND REPAIR OR DISCONNECT THE INSTALLED REMOTE
START MODULE. DIRECTED WILL NOT BE HELD RESPONSIBLE OR PAY FOR INSTALLATION OR REINSTALLATION COSTS.
Remote starters for manual transmission pose significant risks if not properly installed and operated. When testing to ensure the
installation is working properly, only remote start the vehicle in neutral gear, on a flat surface and with a functional, fully engaged
parking brake. Do not allow anyone to stand in front of or behind the vehicle.
This product should not be installed in any convertible vehicles, soft or hard top with a manual transmission. Installation in such
vehicles may pose certain risk.
3DS4+ TL11
© 2017-11-27 Directed. All rights reserved.

Introduction
The TL11 firmware for DS4+ is compatible with specific Lexus, Pontiac, Scion and Toyota vehicles. It is a
complete solution for remote start, security (when security features are enabled), bypass, and features built
in Bluetooth 4.0 allowing you to configure and control your system. This guide provides information on the
installation of the module using TL11. Please refer to the DirectLink application or www.directechs.com for more
information about which configuration is best for your application.
Warning! This module is designed to be configured using the DirectLink application for mobile devices, however it can also
be configured using the web tool located at www.directechs.com. To download the DirectLink mobile application, please visit the
Google Play or Apple store.
Pre-installation and application warnings
Firmware notes: This section highlights important information for this specific firmware and will assist in
pricing accordingly, as well as bringing awareness to any operational or vehicle limitations.
T-Harness
compatible
Keys required for
programming 1Keys required for operation 0
Some Toyota 2010+ models have different encryption types. Please look at your key blade and indentify the markings.
A dot "." means the vehicle is compatible with TL11 firmware. "G" or "H" indicates the vehicle is not compatible with this
firmware. Refer to "Key Types" on page 5 for more information.
Keyless will remain functional during remote start.
Unless specified otherwise, all connectors are displayed from the wire side, with the exception of the OBDII diagnostic
connector.
It is important to check that the fuses are positioned correctly in the module. Proper fuse positioning is displayed on each
wiring diagram.
Refer to the "Vehicle wiring reference chart" following each installation type.
General notes: This section highlights important information for this specific firmware.
[1] The installation of an aftermarket hood pin is ONLY required on vehicles that are NOT equipped with a factory hood pin.
[2] The siren is ONLY required when enabling the security features during module flashing.
[3] The Green wire is ONLY required for starter disable and antigrind applications.
[4] Connection required ONLY if vehicle is equipped with Autolights.
[5] Door trigger input is required when enabling the security features during module flashing.
Additional parts required (maximum required):
Diode 6A
0 x 1A Diodes 86 85
30
87a
87
0 x Relay
Resistor 100Ω
0 x Resistor
Fuse 7.5A
0 x Fuse
4DS4+ TL11
© 2017-11-27 Directed. All rights reserved.

Vehicle application guide
The following table lists the vehicles and features which are compatible with this product. The number assigned to each year
allows you to determine which installation type should be used for your vehicle.
Vehicles
2011 2010 2009 2008 2007 2006 2005 2004 2003 PK-Immobilizer Bypass-Data No Key Req'd DL-Arm Factory Security DL-Disarm Factory Security DL-Door Lock Control DL-Door Unlock DL-Driver Priority Unlock DL-Hatch Glass Release DL-Trunk / Hatch Release DS4+ Only RS-3x LOCK START (Start control using OEM Remote) RS-3x LOCK STOP (Stop control using OEM Remote) RS-Accessory Activation RS-Ignition Activation RS-SmartStart RS-Start (Crank) Activation RS-Tach / RPM Output SS-Entry Monitoring ALL Door Pins SS-Entry Monitoring Hood Pin SS-Entry Monitoring Trunk/Hatch Pin SS-Factory Alarm Trigger Monitoring ST-Brake Status (foot brake) ST-E-Brake Status ST-Ignition Status
Lexus
ES 330 3 3 3 • • • • • •
GX 470 3 3 3 3 3 3 3 • • • • • •
LS 430 3 3 3 • • • • • •
LX 470 3 3 3 3 3 • • • • • •
RX 330 3 3 3 • • • • • •
RX 350 3 3 3 • • • • • •
RX 400h 3 3 3 • • • • • •
Pontiac
11 10 09 08 07 06 05 04 03
Vibe 113 •••••• •••••••••••••••
Scion 11 10 09 08 07 06 05 04 03
tC 3 3 3 3 3 3 • • • • • •
xB 111 •••••• •••••••••••••••
xD 222 •••••• •••••••••••••••
Toyota
11 10 09 08 07 06 05 04 03
4Runner 3 3 3 3 3 3 3 3 • • • • • •
Avalon 3 3 3 3 3 3 • • • • • •
Camry 11111 •••••• ••••••••••••••••
Camry 3 3 3 3 • • • • • •
Corolla 11 •••••• ••••••••••••••••
Corolla 3 3 3 3 • • • • • •
FJ Cruiser 3 3 3 • • • • • •
Highlander 111 ••••••• •••••••••••••••
Highlander 3 3 3 3 • • • • • •
Highlander Hybrid 3 3 • • • • • •
Land Cruiser 3 3 3 3 3 • • • • • •
Matrix 11 •••••• •••••••••••••••
Matrix 3 3 3 3 • • • • • •
RAV4 11111 •••••• •••••••••••••••
RAV4 3 3 • • • • • •
Sequoia 3 3 3 • • • • • •
Sienna 3 3 3 3 3 3 3 • • • • • •
Solara 3 3 3 3 3 3 • • • • • •
Tacoma 3 3 3 3 3 3 • • • • • •
Tundra 3 3 3 3 • • • • • •
Venza 3 • • • • • •
Yaris 3 3 3 3 3 3 • • • • • •
Yaris Sedan 3 3 3 3 3 • • • • • •
Legend:
PK: Transponder & Immobilizer Override
DL: OE Door Lock & Alarm Controls
RS: Remote Start & Engine Controls
SS: Integrated Security & Monitoring
ST: Function/Feature Status
Key Types
Some Toyota 2010+ models have different encryption types. Please look at your key blade and identify the markings. A dot
“.” means the vehicle is compatible with TL11 firmware. “G” or “H” indicates the vehicle is not compatible with this firmware.
Standard Key G-stam ped keys H-stam ped keys
For vehicles with H-stamped key, see the
TL10 firmware. TL11 works only with
standard key.
For vehicles with G-stamped key, see the
TL5 firmware.
H
5DS4+ TL11
© 2017-11-27 Directed. All rights reserved.

Wiring connections
The wiring connections listed below are specific to this firmware.
Main harness (H1), 12-pin black connector
Conn./Pin Color Description
H1/1 Blue/White Relay 1 N.C. – No Connection 1
H1/2 Blue/Red Relay 1 N.O. – (+) 12 Input 1
H1/3 Blue Relay 1 COM – (+) Starter 2 Output 1
H1/4 White/Brown Relay 3 N.C. – No Connection 1
H1/5 White Relay 3 COM – No Connection 1
H1/6 Red (+) 12V Input
H1/7 Lt. Green/Red Relay 2 N.O. – No Connection 1
H1/8 Lt. Green Relay 2 COM – Autolight Off Interrupt (vehicle side) 1
H1/9 Lt. Green/White Relay 2 N.C. – Autolight Off Interrupt (conn. side) 1
H1/10 Black (-) Ground
H1/11 White Relay 3 COM – No Connection 1
H1/12 Red (+) 12V Input
Relay harness (H2), 10-pin white connector
Conn./Pin Color Description
H2/1 N/A No Connection
H2/2 Red/Black (+) 12 Volt Input (Accessory/Starter relay)
H2/3 Pink/Black Relay N.C. – No Connection 1
H2/4 Pink/White Relay COM – Flex Relay Output 1
H2/5 Red (+) 12 Volt Input (Ignition relay)
H2/6 Green Relay COM – (+) Starter Disable (key side) 1
H2/7 Violet Relay N.C. – (+) Starter Output (vehicle side) 1
H2/8 Orange Relay COM – (+) Accessory Output 1
H2/9 Red/White (+) 12 Volt Input (flex relay)
H2/10 Pink Relay COM – (+) Ignition Output
Data harness (H3), 8-pin white connector
Conn./Pin Color Description
H3/1 Tan HS CAN Low 1
H3/2 Tan/Black HS CAN High 1
H3/3 Orange/Brown HS or FT CAN Low 2
H3/4 Orange/Green HS or FT CAN High 2
H3/5 Lt. Green Single Wire CAN or J1850
H3/6 Violet/Brown (MUX) Analog Input/Output
H3/7 Orange/Black Data RX
H3/8 Yellow/Black Data TX
1. If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed.
6DS4+ TL11
© 2017-11-27 Directed. All rights reserved.

Analog input/output harness (H4), 22-pin white connector
Conn./Pin Color Description
H4/1 Lt. Green/Black (-) Parking Lights Output 1
H4/2 Blue/White (-) Ground When Running (status) Output ; (-) Keysense Output 1
H4/3 Dk. Green/Black (-) Lock Output 1
H4/4 Red/White (-) Trunk Release Output 1
H4/5 Brown/Black (-) Horn Output 1
H4/6 Brown/White (-) AUX 1 Output 1
H4/7 White (+) AUX 2 Output 1
H4/8 Violet/Black (+) AUX 3 Output 1
H4/9 Dk. Blue/Black (-) Unlock Output 1
H4/10 Lt. Blue/Black (-) Factory Alarm Disarm (FAD) Output 1
H4/11 Brown/Red (+) Siren Output 1
H4/12 Pink (+) Ignition Sense Input
H4/13 Violet (+) Door Input 2
H4/14 Brown (+) Brake Input 2
H4/15 White/Blue (-) Activation Input 2
H4/16 Red/Blue (-) Valet Switch 2
H4/17 Black/White (-) E-Brake Input (manual transmission) 2
H4/18 Orange/Black (-) Instant Alarm Input 2
H4/19 Blue (-) Trunk Input 2
H4/20 Green (-) Door Trigger Input 2
H4/21 Gray (-) Hood Pin Input 2
H4/22 Violet/White (AC) Tach Input
RF Port harness (H5), 2-pin white connector
Conn./Pin Color Description
H5/1 N/A RF Loop
H5/2 N/A RF Loop
D2D harness (H6), 4-pin white (1) and black (2) connectors
Conn./Pin Color Description
H6/1 Blue (Data) TX
H6/2 Black (-) Ground
H6/3 Green (Data) RX
H6/4 Red (+) 12 Volt
Temperature sensor harness (H7), 2-pin black connector (optional, 8556T)
Conn./Pin Color Description
H7/1 Black Temperature Sensor
H7/2 Black Temperature Sensor
1. If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed. Note that they are low current and a relay
may be necessary.
2. These connections are only required if the corresponding statuses are not supported by the firmware. See "Vehicle application guide" on page 5 for a
list of compatible features. If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed. Note that they
are low current and a relay may be necessary.
7DS4+ TL11
© 2017-11-27 Directed. All rights reserved.

Installation (wiring diagrams, fuse selection & vehicle wiring reference charts)
Type 1
Refer to "Pre-installation and application warnings" on page 4 for important information, such as the description of special notes referenced in the diagram ( ).
Autolight Interrupt (vehicle side): Lt. Green: 8
Autolight Interrupt (conn.side): Lt. Green/White: 9
(-) Ground: Black: 10
HS CAN Low: Tan : 1
(-) Parking Light Output: Lt.Green/Black: 1
HS CAN High: Tan/Black: 2
Data TX: Yellow/Black: 8
Data RX: Orange/Black: 7
Siren
Hood Pin
(+) 12V Input: Red: 6 & 12
(+) Starter 2 Output: Blue: 3
(+) 12V Input: Blue/Red: 2
(+) Ignition Input/Ouput: Pink: 10
(+) 12V Input: Red: 5
(+) 12V Input: Red/Black: 2
(+) Ignition 2 Output: Pink/White: 4
(+) 12V Input: Red/White: 9
(+) Starter Output (Car Side): Violet: 7
(-) Hood Input: Gray: 21
(+) Siren Output: Brown/Red: 11
Starter Input (Key Side): Green: 6
OBDII Plug
Black Connector
HS CAN High: Pin 6
HS CAN Low: Pin 14
Data RX: Pin 4
Data TX: Pin 5
16
8
9
1
Refer to the Vehicle Wiring Reference Chart for wire and
connector details.
Ignition Switch
7
3 4
5 86
1 2
Transponder Key Amplier
(black 7-pin ignition connector)
Headlight Switch
(white 20-pin conn.)
12345678910
1112131415161720
19 18
(-) Parking Lights: Pin 18
Autolight:
Pin 19
12347 6 5
Dash Fuse Box
(white 1-pin conn.)
1
22 810 12
4 2442
DS4+
DS4
Slide
to open
Proper Fuse
Positioning
DS4+ DS4
It is important to check that the
fuses are positioned correctly.
MAIN (5A) (+)
(-) RLY3 PK LIGHT (15A) (+)
(-) ACC & START (30A) (+)
(-) FLEX RLY (20A) (+)
IGN (20A) (+)
MAIN (5A) (+)
(-) RLY3/PK LIGHT(15A) (+)
5
30
20
20
5
CUT
8DS4+ TL11
© 2017-11-27 Directed. All rights reserved.

Vehicle wiring reference chart
This section provides vehicle wiring information to guide you through the various stages of your installation. Refer to
www.directechs.com for additional information.
Wire Information Connector Information
Function Color Pin Polarity Location Color Pins Ref.
Pontiac Vibe 2009-2010
RX Lt. Blue 4 Data Transponder Key Amplifier on ignition switch. Black 7 A
TX Tan 5 Data Transponder Key Amplifier on ignition switch. Black 7 A
Starter 1 Black 8 (+) Ignition switch. White 8 B
Starter 2 (2.4L only) White 1 (+) Ignition switch. White 8 B
Ignition 1 Brown 6 (+) Ignition switch. White 8 B
Ignition 2 Green 4 (+) Ignition switch. White 8 B
HS CAN High Lt. Green 6 Data OBDII. White 16 C
HS CAN Low White 14 Data OBDII. White 16 C
Parking Lights Brown 18 (-) Headlight switch. White 20 D
12V White 1 (+) Dash fuse box. White 1 E
Scion xB 2008-2010
RX Pink 4 Data Transponder Key Amplifier on ignition switch. Black 7 A
TX Green 5 Data Transponder Key Amplifier on ignition switch. Black 7 A
12V White 7 (+) Ignition switch. White 8 B
Starter 1 White 8 (+) Ignition switch. White 8 B
Starter 2 White 1 (+) Ignition switch. White 8 B
Ignition 1 Gray 6 (+) Ignition switch. White 8 B
Ignition 2 White 4 (+) Ignition switch. White 8 B
HS CAN High Lt. Green 6 Data OBDII. Black 16 C
HS CAN Low White 14 Data OBDII. Black 16 C
Parking Lights White 18 (-) Headlight switch. White 20 D
9DS4+ TL11
© 2017-11-27 Directed. All rights reserved.

Wire Information Connector Information
Function Color Pin Polarity Location Color Pins Ref.
Toyota Camry 2007-2011
RX Brown 4 Data Transponder Key Amplifier on ignition switch. Black 7 A
TX Red 5 Data Transponder Key Amplifier on ignition switch. Black 7 A
12V Black 5 (+) Ignition switch. White 8 B
Starter 1 Blue 7 (+) Ignition switch. White 8 B
Starter 2 Gray 3 (+) Ignition switch. White 8 B
Ignition 1 Yellow 6 (+) Ignition switch. White 8 B
Ignition 2 Pink 1 (+) Ignition switch. White 8 B
HS CAN High Black 6 Data OBDII. Black 16 C
HS CAN Low White 14 Data OBDII. Black 16 C
Autolights Green 19 Cut Headlight switch. White 20 D
Parking Lights Black 18 (-) Headlight switch. White 20 D
Toyota Corolla 2009-2010
RX Lt. Blue or Pink 4 Data Transponder Key Amplifier on ignition switch. Black 7 A
TX Tan or Green 5 Data Transponder Key Amplifier on ignition switch. Black 7 A
Starter 1 Black or White 1 (+) Ignition switch. White 8 B
Starter 2 White 8 (+) Ignition switch. White 8 B
Ignition 1 Brown or Gray 6 (+) Ignition switch. White 8 B
Ignition 2 Green or White 4 (+) Ignition switch. White 8 B
HS CAN High Lt. Green 6 Data OBDII. Black 16 C
HS CAN Low White 14 Data OBDII. Black 16 C
Parking Lights Brown or White 18 (-) Headlight switch. White 20 D
12V White 1 (+) Dash fuse box. White 1 E
Toyota Highlander 2008-2010
RX Red 4 Data Transponder Key Amplifier on ignition switch. Black 7 A
TX Lt. Blue 5 Data Transponder Key Amplifier on ignition switch. Black 7 A
12V White/Black 5 (+) Ignition switch. White 8 B
Starter 1 Yellow 7 (+) Ignition switch. White 8 B
Starter 2 Red 3 (+) Ignition switch. White 8 B
Ignition 1 Black 6 (+) Ignition switch. White 8 B
Ignition 2 Lt. Blue 1 (+) Ignition switch. White 8 B
HS CAN High Blue 6 Data OBDII. Black 16 C
HS CAN Low White 14 Data OBDII. Black 16 C
Autolights Green 19 Cut Headlight switch. White 20 D
Parking Lights Lt. Blue 18 (-) Headlight switch. White 20 D
Toyota Matrix 2009-2010
RX Lt. Blue 4 Data Transponder Key Amplifier on ignition switch. Black 7 A
TX Tan 5 Data Transponder Key Amplifier on ignition switch. Black 7 A
Starter 1 Black 8 (+) Ignition switch. White 8 B
Starter 2 (2.4L only) White 1 (+) Ignition switch. White 8 B
Ignition 1 Brown 6 (+) Ignition switch. White 8 B
Ignition 2 Green 4 (+) Ignition switch. White 8 B
HS CAN High Lt. Green 6 Data OBDII. Black 16 C
HS CAN Low White 14 Data OBDII. Black 16 C
Parking Lights Brown 18 (-) Headlight switch. White 20 D
12V White 1 (+) Dash fuse box. White 1 E
10 DS4+ TL11
© 2017-11-27 Directed. All rights reserved.