Displays2go SMHSNATLG User manual

SKUs: SMHSNATLG, SMHSNATSMSKUs: SMHSNATLG, SMHSNATSM
Aemy InructionsAemy Inructions
Wood and Metal Hostess standWood and Metal Hostess stand

PARTS LIST
Scan QR code to visit product page
PART QUANTITY
A: Front Panel .........................................1
B: Rear Frame.........................................1
C: Wrap..................................................1
D: Bottom Side Connector ....................2
E: Top Side Connector...........................2
F: Side Panel...........................................2
G: Bottom Panel.....................................1
H: Top Panel ...........................................1
O: Shelf...................................................1
K-1: Rear Castor....................................2
K-2: Front Castor....................................2
L: Shelf Supports ....................................4
M: Screw ..............................................21
N: Pointed Screw.................................10
P: Top Screw...........................................1
NOTE: (N) SCREW HAS A QUANTITY
OF 19 IN MODEL SMHSATSM.SMHSATSM.
If you have any questions regarding our products, please visit us at www.displays2go.com or
contact D2G customer service at 844-221-3388.

1. Screw top and bottom side connectors to the side panel (F) with screw (N) as shown.. Repeat for
both side panels.
2. Connect front panel (A) and rear frame to sides using eight (M) screws.
3. Insert eight (N) screws through brackets to secure side panels, as shown.
4. Attach wrap to the top of unit, using seven (M) screws.

5. Insert top panel and fit into place. Secure with (P) screw.
6. Insert bottom panel and secure with eight (N) screws in pre-drilled holes.
NOTE: Gently flip unit onto its side to perform step 6. Ensure unit is laid down softly to prevent
damage.
7. Attach castors to the bottom of the unit. K-1 will be placed on either side of the back of the unit,
and K-2 will be on the front corners. Be sure to consult diagram.
8. Insert shelf supports (L) at desired height.

9. Slide shelf into the unit.
10. Ensure it is fitted into the unit so that the back of the shelf is flush with the
front panel (A), as shown.
Enjoy your new wood and
metal hostess stand!