Displays2go FDEDGECTA User manual

User ManualUser Manual
EDGE-LITEDGE-LIT
COLLABORATION STATIONCOLLABORATION STATION
SKU: FDEDGECTASKU: FDEDGECTA Scan the QR code to visit
the product page.

PARTS LISTPARTS LIST
If you have any questions regarding our products, please visit us at www.displays2go.com or
contact Displays2go customer service at 844-221-3388.
Hardware and ToolsHardware and Tools
A
Table Top -1pc
B
Base -1pc
C
E F
Back Panel
-1pc
Metal Frame Footer - 1pcTV Wall Mount Bracket - 1pc
D
Metal Frame - 1pc
Cam Lock - 2pcs
GCam Bolt - 2pcs
H
Wood Dowel - 2pcs
I
Allen Key - 1pc
KL
Bolt M6*15mm -2pcs Bolt M6*12mm -4pcs
N
Bolt M6*60mm -6pcs
J
M
Screw M4*10 - 3pcs
P
Grommet
-2pcs
O
Bolt M6*35mm -5pcs
Not Included:
Up to 43” ScreenPhilips Screwdriver

3
ASSEMBLYASSEMBLY
Prepare Tabletop Connection to Base.
1. Screw cam locks (G) into underside of the tabletop (A).
2. Insert cam bolts (H) and dowels (I) into the base (B). Insert grommets (P).
NOTE: Two people required for assembling and moving unit.
Prepare Base.
3. Attach footer (F) to underside of metal frame (D) using M6 x 15mm bolts (L), then flip over.
4. Attach frame to base using M6 x 35mm bolts (O) and tighten with allen key (K).
Hx 2
Ix 2
B
Gx 2
A
Px 2
Lx 2
F
D
x 5
O
K
D
B

4
Attach Tabletop
5. Lay tabletop on metal frame and attach
tabletop to base using the dowels and
cam bolts.
6. Screw the metal frame to the tabletop
using M6 x 60mm bolts (J). Tighten
with allen key (K).
7. Feed power strip wires through the
grommet and pull through to the back
of the unit.
x 6
JK
B
A
8. Screw mounting base into pre-drilled holes on back panel using M6 x12mm bolts (N).
9. Follow mounting kit instructions to securely affix your screen to the unit.
10. Feed screen’s power cord through grommet (P) into back panel.
E
x 4
N
NOTE: TV mount supports screen sizes up to 43”. Ensure screen is securely mounted to bracket.
Mount Screen
P
Power Strip
• Power Outlet (2)
• USB Charging Port (2)

5
Connect Wires in Back Panel
11 . Plug LED light cord into wired outlet.
12.Pull cords through plastic bracket and
plug into to internal power strip.
13. Pull power cord out through panel
keyhole.
14. Slide in back panel (C) and secure
with M4 x10mm screws (M). Plug
unit’s power cord into wall outlet.
8. Screw mounting base into pre-drilled holes on back panel using M6 x12mm bolts (N).
9. Follow mounting kit instructions to securely affix your screen to the unit.
10. Feed screen’s power cord through grommet (P) into back panel. • Aim the remote control directly at the
LED strip.
• If remote control does not initially
control the LED strip, hold the ON
key down for 5 seconds to pair. The
light strip flashes slowly to indicate
successful pairing.
Remote ControlRemote Control Dimmer Up / Down
LED Color Pad
Program Controls
P
ause Li
g
ht Pro
g
ra
m
LED On
/
Off
C
B
x 3
M
If you have any questions regarding our products, please visit us at www.displays2go.com or
contact Displays2go customer service at 844-221-3388.