Displays2go LTCEIL20 User manual

12
Item No.:LTCEIL20
Installationsanleitung
安装说明
組み立ての説明
Guida d'installazione
Guide d'installation
Installation guide
Guia de instalación
Инструкция по установке
Guia de Instalação
400X400 26"-55" 30kg 510-810mm
5
-2
STEP3-B
A1
x4
M4x25mm
A2 A3
A4 A5 A6
x4 x4
x4 x4 x4
M5x25mm M6x25mm
M8x25mm
B1 B2 B3
x5 x5 x5
x2 x2
4x4/5x5
Allen key M6/M8
box wrench
Magnetic removable
bubble level
x1
M6 nut
(4P CS)
M6 washer
(4PCS)
M6x16 screw
(4PCS)
adaptor
(4PCS)
M8 nut
(6P CS)
TV plate
Wall plate
B1
B3
x3
x3
M8 washer
(2PCS)
M8x55 screw
(2PCS)
Wood stud
60mm
Φ3/16 (5mm)
Wood Stud Mounting
4x4
Allen Key
M6
Box Wrench
300
400
300 400 200
M6 nut
(4P CS) M6 washer
(4PCS)
M6x16 screw
(4PCS)
VESA: 200X100 /200X200
60mm
Φ3/8 (10mm)
STEP3-A
Solid concrete mounting B2
B3
Solid concrete B1
x5
x5
x5
STEP2
5x5
Allen Key M8
Box Wrench
5x5
Allen Key
M8
Box Wrench
5x5
Allen Key
M8
Box Wrench
b
0~45°
0~45°
ca
WALL WALL
WALL
0~45°
STEP1
B1
B3
B2
B1
B3
M8
Box Wrench
adaptor
(4PCS)
M8 nut
(4P CS)
VESA: 300X200 / 300X300/400X200 /400X400
200
100
200
Loosen the adjusting nuts
Adjustment angle
Tightening the adjusting nuts
Loosen the adjusting nuts
Adjustment angle
Tightening the adjusting nuts
A5 A6
A1-A4
Square washer(A6)
Small hole for
M4 screws
Medium hole for
M5 and M6 screws
Large hole for
M8 screws
STEP4-A

M8
Box Wrench
5x5
Allen Key
A5
A6
A1-A4
STEP4-B Square washer(A6)
Small hole for
M4 screws
Medium hole for
M5 and M6 screws
Large hole for
M8 screws
STEP5
MIN:510mm MAX:810mm
-2°~15°
M8 Box
Wrench
Tighten or loose the screw nuts M8
on the head of the TV plate to adjust
the tilting function
CAUTION
This product contains small items that could be a choking hazard if swallowed.Keep these items away from young children.
● Make Sure these instructions are read and completely understood before attempting installation.If you are unsure of any part of this installation,please contact a professional
installer for assistance.
● The wall or mounting surface must be capable of supporting the combined weight of the mount and the display,otherwise the structure must be reinforced.
● Safety gear and proper tools must be used.A minimum of two people are required for this installation.Failure to use safety gear can result in property damage,serious injury or
death.
● please check joint parts every two months,making sure the screws are loosened or not.
This product was designed to be installed on wood stud walls and solid concrete walls.Before installing, make sure the wall will support the combined load of the equipment and
hardware.Never exceed the maximum load capacity 30 KG,or else it may result in product failure or personal injury.
Note:this product is intended for indoor use only.Use of this product outdoors could lead to product failure or personal injury.