DIVERSIFIED WOODCRAFTS Shain WW4 User manual

[1]
WW4 WORKBENCHS
ASSEMBLY INSTRUCTIONS
*Model views may not represent exact model purchased

[2]
TABLE OF CONTENTS
ASSEMBLY COMPONENTS_______________________________________3
APRON TO LEG ATTACHMENT___________________________________4
LEG ASSEMBLY_________________________________________________5
LEG BRACES & STRETCHERS_____________________________________6

[3]
ASSEMBLY COMPONENTS
ITEMS INCLUDED
PART #
1-LEG KIT,TABLE
L3030
1-APRON ASSY,TABLE
231995
1-TOP,TABLE
16-
0052
2-STRETCHERS, LEG
S7000
1-SHELF,ADJ,MD3,EB4,.75
231996-
4000
2-BRACES
LS7000
8-SCREW,7MMX90MM
227578
8-SCREW,7MMX50MM,
228564
6- SCREWS,#8.00X1.5 FSQ
100066
12-SCREW,#8X1-3/4 QUAD
RD WASH HD
100641
WILTON CORP - 63144 -
VISE-78A OPTIONS WITH VISES
20-
0185
---
Original Created
5-22-09
NAM
1.
Added details for the top assembly. Center top, ect…
5-19-10
DK
2.
REV PARTS LIST AND ASSY INSTRUCTIONS
7/23/10
TJP

[4]
REV DESCRIPTION DATE
Assembly Instructions
Items not included but needed for assembly:
1. ½” wrench
Instructions:
1. Lay the top on a clean and level surface, so you don’t damage the tabletop. Place
the side of the top with the beveled edge (good side) facing downward. NOTE:
You may need additional help with this step, as the top, and or apron assembly
will be heavy.
2. Take each of the table legs and insert the stud bolt through the hole in the steel
corner brace.
3. Apply a lock washer and a 5/16” nut onto each stud bolt. Tighten each nut using a
minimum of 12 foot-pounds but not exceeding 17 foot-pounds of torque.

[5]
4. Slide leg boots onto the legs with the flared end toward the bottom of the leg.
5. Screw leg levelers into t-nut in the bottom of the leg.
6. NOTE: TABLES WITH LEG BRACES AND STRETCHERS SEE
FIGURE 8A.
FIGURE 8A

[6]
7. Attach leg braces with: (SCREW,7MMX90MM,CONN,ALLENHEAD,BLACK)
Provided
8. Attach stretcher with: (SCREW,7MMX50MM,CONN,ALLENHEAD,BLACK)
Provided
9. Attach shelf using 6- SCREWS,#8.00X1.5 FSQ SMS TYPE 17 (100066)
10. Turn the table over so the top is up. Set your table in place and adjust the leg
levelers to level the table.
11. Slide the leg boot down to the floor.
Stretcher
Leg Brace