DNP DP-QW410 User manual

©2023 Dai Nippon Printing Co., Ltd.
2023071801
Version 1.0.1.2
DIGITAL PHOTO PRINTER
DP-QW410
Printer Driver Instruction Manual
Supported OS: Windows 11

● Safety precautions
Before you use the printer, carefully read the User Guide to ensure that you use the printer
correctly. Be aware that the content complies with the standards at the time the User Guide
section related to safety, including usage and safety precautions, was created.
● Modifications
To ensure product safety, modification of the DP-QW410 printer and DP-QW410 printer driver is
prohibited.
● Copyright
The copyrights, trademark rights, and other intellectual property rights related to documents and
programs included with this product are the property of Dai Nippon Printing Co., Ltd. and other
rights holders. You cannot copy and use these items without the permission of Dai Nippon
Printing Co., Ltd. except where permitted by applicable laws.
Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the
United States and in other countries.

Table of contents
Chapter 1 Installation ______________________________1
1.1 Prepare the printer and computer _________________________________________________________2
1.2 Install the driver package________________________________________________________________2
1.3 Install the printer driver _________________________________________________________________6
1.4 Install drivers for unspecified devices ______________________________________________________7
Chapter 2 Properties _______________________________9
2.1 Open the printer properties ______________________________________________________________9
2.2 Print settings functions ________________________________________________________________11
2.2.1 Layout _________________________________________________________________________11
2.2.2 Advanced options _________________________________________________________________12
2.2.3 Paper/Quality ____________________________________________________________________18
2.2.4 Option__________________________________________________________________________18
2.2.5 Color Adjustment _________________________________________________________________20
2.2.6 Printer information ________________________________________________________________21
2.3 Default values for settings ______________________________________________________________23
2.4 Color management ___________________________________________________________________24
2.5 Print Area___________________________________________________________________________25
2.6 Orientation__________________________________________________________________________26
Chapter 3 Update the driver ________________________27
Chapter 4 Delete the driver _________________________30
4.1 Automatic deletion of printer drivers ______________________________________________________30
4.2 Manual deletion of printer drivers ________________________________________________________31

1
[DP-QW410 Printer Driver] Instruction Manual (For Windows 11)
Chapter 1 Installation
Installation procedure
The installation procedure is made up of three steps.
The details of each step are explained below.
Step 1 Prepare the printer and computer → “1.1 Prepare the printer and computer”
Step 2 Install the driver package → “1.2 Install the driver package”
Install the driver package.
Step 3 Install the printer driver → “1.3 Install the printer driver”
Connect the USB cable, switch on the printer, and
then install the printer driver.
After installation is complete, restart the computer.
At this point, the USB cable is not
yet connected.
On
USB cable

2
[DP-QW410 Printer Driver] Instruction Manual (For Windows 11)
1.1 Prepare the printer and computer
Make sure that the printer power is off.
Prepare a USB cable. However, do not use the USB cable to connect the printer and computer at this
time.
Log in to Windows as an administrator. The following explanation presumes that the operations are
carried out with administrator privileges.
1.2 Install the driver package
Open Windows Explorer, and then click the corresponding drive.
Select the following installation folder.
Driver package folder\DP-QW410_Driver
Figure 1.2.1 Driver Package folder
CAUTION:
The display settings of the computer must be set as follows. If the settings differ from the
following, the printing preferences screen and other items may not fit in the display area.
· Resolution: At least 1280x800
· Size of text and other items (DPI): 100%
NOTE: You must UNINSTALL the previous DNP printer driver PRIOR to installing the DNP v1.0.1.2
or later version Windows11 driver, especially when the PC has been upgraded from Windows 10 to
Windows 11.

3
[DP-QW410 Printer Driver] Instruction Manual (For Windows 11)
In the selected folder, double click the following file: DriverInstall.CMD. (Depending on your usage
environment, the .CMD extension may not be displayed.)
Figure 1.2.2 Installation file
When you start the installer, a window appears for selecting the language that will be used during the
installation. After you select the language to use, click “OK”.
Figure 1.2.3 Language selection screen
Click “Next >” when the Installation Wizard screen appears.
Figure 1.2.4 Installation Wizard start screen

4
[DP-QW410 Printer Driver] Instruction Manual (For Windows 11)
Click “Install” when the installation is ready.
Figure 1.2.5 Installation start confirmation screen
When the installation starts, a screen appears that shows the installation status.
Figure 1.2.6 Installation status screen

5
[DP-QW410 Printer Driver] Instruction Manual (For Windows 11)
When a User Account Control dialog box appears, click “Yes”.
Figure 1.2.7 User Account Control
Click “Install” when the Windows Security confirmation display appears.
Figure 1.2.8 Windows Security confirmation
Installation of the driver package starts. Wait until installation finishes.
Click “Finish” when the Installation Wizard completion screen appears.
Figure 1.2.9 Finish of Installation Wizard

6
[DP-QW410 Printer Driver] Instruction Manual (For Windows 11)
1.3 Install the printer driver
Use the USB cable to connect the printer and computer, and then switch on the power of the DP-
QW410 printer. After the printer is recognized, installation of the driver starts.
*For information on the connection, refer to the User Guide of the printer.
Click “Start”, select “Settings” -> “Bluetooth & devices”, and then open “Printers & scanners”.
Figure 1.3.1 Bluetooth & devices
On the Printers & scanners screen, check that DP-QW410 appears.
This completes installation of the printer driver.
Figure 1.3.2 Printers & scanners
After the installation of the printer driver is complete, always restart the computer.

7
[DP-QW410 Printer Driver] Instruction Manual (For Windows 11)
1.4 Install drivers for unspecified devices
If the printer does not appear on the Printers & scanners screen, select “Devices” on the “Bluetooth &
devices” screen. Select “More devices and printer settings” on the “Devices” screen to open the
“Devices and Printers” screen. If you connect a printer that is on to the computer before installing the
driver package, a device is created under “Unspecified” in “Devices and Printers”.
Figure 1.4.1 Photo Printer under Unspecified
In such a case, use the following method to install the printer driver.
Furthermore, use the following method to install the printer driver if you use the standard installation
procedure (install the driver package, connect the printer, and then install the printer driver), but the
driver is not installed correctly, and a device is created under “Unspecified”.
1. Install the driver package
When the driver package has not yet been installed, install it by following the procedure in “1.2
Install the driver package”.
If you install the driver package, installation of the printer driver for the unspecified device completes
it automatically.
2. Installing a driver for an unspecified device
Refer to page 8 for the driver installation procedure for an “Unspecified” device after installing the
driver package.

8
[DP-QW410 Printer Driver] Instruction Manual (For Windows 11)
1. Right-click “Dai Nippon Printing DP-QW410” of the “Unspecified” device in “Devices and Printers”,
and click “Remove device” from the pull-down menu.
Figure 1.4.2 Delete “Photo Printer”
2. Disconnect the USB cable connected to the printer.
3. Restart your computer.
4. After starting up the computer, connect the USB cable again and turn on the printer.
In Printers & scanners, make sure that “DP-QW410” is present.
This completes installation of the printer driver.
Figure 1.4.3 Printers & scanners
After the installation of the printer driver is complete, always restart the computer.

9
[DP-QW410 Printer Driver] Instruction Manual (For Windows 11)
Chapter 2 Properties
You can configure various printer settings from the Properties of the driver. Make sure you understand
the contents well before changing settings. To use the properties, log in as an administrator.
Depending on the application you are using, you must perform this operation from the print settings of
the application.
2.1 Open the printer properties
1. Click “Start”, and then select “Settings” to open the Settings screen.
2. From the “Settings” screen, select “Bluetooth & devices” -> “Printers & scanners”.

10
[DP-QW410 Printer Driver] Instruction Manual (For Windows 11)
4. The DP-QW410 Properties screen appears.
3. Click “DP-QW410”, and then select “Printer properties” to open the Properties screen.

11
[DP-QW410 Printer Driver] Instruction Manual (For Windows 11)
2.2 Print settings functions
If you select the basic settings from the Properties screen, you can change various print settings.
2.2.1 Layout
Orientation
Set the print orientation to “Portrait” or “Landscape”.
For details, refer to “2.6 Orientation”.
Page Order
In the application, specify the order when multiple copies of an image are printed.
Example) Print order
Page Format
Pages per Sheet
Set printing of the specified division size. In most situations, set “1”.
Example) Division size
Front to Back
Back to Front
No.1
No.2
No.3
1 division
11
4 divisions
9 division
Figure 2.2.1 Layout tab

12
[DP-QW410 Printer Driver] Instruction Manual (For Windows 11)
2.2.2 Advanced options
If you select “Advanced...” on the Layout tab, you can configure various advanced options.
Paper/Output
Paper Size
Specify the paper size. The paper size that can be specified depends on the media size that is
loaded in the printer. If the printer is offline, the loaded media size is assumed to be 4x6.
Loaded media
size
Specifiable paper size
Multiple layout
4x6(*1)
4x3
Enable
4x4, 4x4.5, [4x6]
Disable
4.5x6(*1) (*2)
4x3, 4.5x3
Enable
4x4, 4x4.5, 4x6, 4.5x4, 4.5x4.5, [4.5x6]
Disable
4.5x8(*2)
4x3, 4.5x3, 4.5x4
Enable
4x4, 4x4.5, 4x6, 4.5x4.5, 4.5x6, [4.5x8]
Disable
The paper size in square brackets [ ] is the default paper size for the loaded media.
*2: For paper sizes that can create
margins on the sides of the output results,
a warning appears.
Figure 2.2.2.4 Incompatibility media size
(Warning indication)
*1: Paper sizes that cannot be used for
printing are grayed out.
Figure 2.2.2.3 Incompatibility media size
(Gray out indication)
Figure 2.2.2.2 Advanced options tab
Figure 2.2.2.1 Advanced settings

13
[DP-QW410 Printer Driver] Instruction Manual (For Windows 11)
Copy Count
You can specify the number of copies to be published for images.
Graphic
ICM Method
ICM Method
Function
ICM Disabled
Synchronized with “Color Adjustment Disabled” in the 2.2.4
Option.
ICM Handled by Host System
Synchronized with “Color Adjustment ICM” in the 2.2.4
Option.
Manage colors using the driver.
ICM Handled by Printer
When this item has been selected, operation is the same as
“ICM Handled by Host System”.
ICM Intent
Set the rendering method when using ICM. For the ICC profile, always set to “Pictures”.
Do not use other settings.
Document Options
Advanced Printing Features
Always set “Enabled”. Do not use other settings.
Pages per Sheet Layout
Set the layout direction of an image when the Pages per Sheet setting is set for multiple divisions.
Printer Features
Border
Synchronized with Border in the Option.
Overcoat Finish
Set the overcoat finish method for the surface of printed items from the following two types.
Overcoat Finish
Function
Glossy
Create an item with a glossy finish.
Matte
Create an item with a matte finish.

14
[DP-QW410 Printer Driver] Instruction Manual (For Windows 11)
Print Re-try
Specify whether to print data in the printer buffer after a printer error has been cleared.
Print Re-try
Function
Disable
Clear the print data in the printer buffer when a printer error occurs.
You must send the cleared print data again after the error is cleared.
When you use an application with an error recovery function, select
this option.
Enable
Save print data in the printer buffer when an error occurs.
The printing process is restarted from the saved data after the error is
cleared.
Note that if the power is switched off, the data is not saved.
Depending on the printer error, print data in the print buffer will be cleared, regardless of the Print
Re-try setting.
The following section shows the operation for each Print Re-try setting by error.
Error content
When Print Re-try is disabled
When Print Re-try is enabled
Paper end
You must send the unprinted
image data again after the error
is cleared.
The printing process is restarted
from the data saved in the printer
buffer after the error is cleared.
When the paper initialization
operation is to be carried out,
printing occurs afterwards.
Ribbon end
Top Door open
No trash box
Paper jam
To prevent the occurrence of an error, printing will not be restarted,
regardless of the Print Re-try function setting.
After the printer stops due to an error, follow the User Guide of the
printer to eliminate the cause of the paper or ribbon error.
You must send the unprinted image data again after the error is
cleared.
Ribbon error
Paper size setting error
System error
Because the printer must be switched on and off to clear the error, the
print data in the printer buffer is cleared regardless of the Print Re-try
setting.
After the printer has restarted, you must send the unprinted image
data again.
･Data error
･Head voltage error
･Head position error
･Cutter error
･Head temperature error
･Media temperature error
･RFID module error
･USB power supply
voltage error

15
[DP-QW410 Printer Driver] Instruction Manual (For Windows 11)
2inch cut
Specify whether to cut paper into multiple sheets with a 2-inch length when you use a specified
paper size.
2inch cut
Function
Disable
Cut at the normal size.
Enable
Cut at 2-inch lengths so that the 4x4 size becomes two sheets ,
the 4x6, 4.5x6 size becomes three sheets and the 4.5x8 size becomes
four sheets.
In the case of 2inch cut, due to mechanical limitations, its edges can
cause slight image bleed.
It can be prevented by making the space between the images a single
color of about 3 mm as shown in the figure.
High quality mode
Enables or disables high quality mode.
High quality mode
Function
Disable
Prints with normal quality.
Enable
Prints with high quality.(*1)
* 1: Printing time takes longer than printing with normal quality.
Decurling action
Set the decurling action.
Decurling action
Function
Disable
Does not execute the decurling action.
Enable
The decurling action is performed.
Auto
The printer automatically controls the decurling action depending on
the media status.
Be careful as paper may get caught under the lower part of the front surface of the printer when the
decurling action is disable.
Cut when paper
is ejected
Cut when paper
is ejected
2inch cut edges can cause
slight image bleed.
3 mm
3 mm
3 mm
3 mm

16
[DP-QW410 Printer Driver] Instruction Manual (For Windows 11)
＜Multiple layout＞
You can enable multiple layout settings by setting the paper size of the printer driver. If it sends
multiple images from the application, the printer driver allocate them automatically as the multiple
layout.
The following section shows the image sizes.
Layout settings
Driver paper size setting
Paper
direction
Paper size length x height
(mm)
Media used
(4x3)
Portrait
(107.2 x 79.3)
4x6, 4.5x6, 4.5x8
Landscape
(79.3 x 107.2)
(4.5x3)
Portrait
(119.3 x 79.3)
4.5x6, 4.5x8
Landscape
(79.3 x 119.3)
(4.5x4)
Portrait
(119.3 x 104.7)
4.5x8
Landscape
(104.7 x 119.3)
Note) Because they are carried out by the print job, multiple layout are carried out when there
are multiple images in a single job.
If you want to layout the same image, send the same number of images as the number-
of-sheets setting.
The printer handles two pictures at one time and cuts the paper after it is ejected.
In the case of Multiple layout,due to mechanical limitations, its edges can cause slight
image bleed.
It can be prevented by making the space between the images a single color of about 3
mm as shown in the figure, or by printing with borders.
Cut when
paper is ejected
Multiple layout
<When the top and bottom are made
into a single color of about 3mm>
Multiple layout
Cut when
paper is ejected
Multiple layout cut edges can
cause slight image bleed.
3mm
3mm
3mm

17
[DP-QW410 Printer Driver] Instruction Manual (For Windows 11)
< Application usage example >
This usage example uses Windows Explorer.
Step 4. Click “Printer Properties...”.
Step 5. Set the Orientation to “Portrait”,
and click “Advanced...”.
Step 2. Click “Print”.
Step 1. In Windows Explorer, select two or more
pictures. Next, click “Show more options”.
Step 3. Select “Fit picture to frame” check box,
and then click “Options...”.
Step 6. Set the paper size to the setting of the
multiple layout. Click “OK” twice to close
the dialog boxes in Step 6 and 5 and
return to the display in Step 3.
Select 2
or more
images
Step 7. Click the “Print” button.