-
connected in parallel.
Troubleshooting
Warranty
Wiring diagram
8(N)
2(N) 46
~
S 21 S 22
Not-Aus-Kreis
VFour-pole neutral conductor left or right depending on device design
rot / red
grün / green
VPosition and colour of LEDs. Type A RCCBs only have the red LED.
Installation and operating instructions
for residual current circuit-breakers of model range
DFS 4 NA
Application instructions and warnings
-
Intended use and installation
-
on the rating plate.
Installation notes
the supply.
Testing and functional check
-
-
-
-
-
-
sidual currents is still guaranteed. The internal supply of the residual current circuit-
Emergency switch equipment function
-
Technical data
DFS 4 NA
Rated current
Detection range
of residual current
operating
fordetection of
residualcurrents
type A/AC
for detection
of residual
currents type B
four-pole
N left
N right
Rated connection and discon-
Rated short-circuit con-
nection and disconnection
capacity IΔ
Installation position optional
changes
Connector
cross-section
solid
stranded
Endurance
electrical
standard
>>
distribution board installation
yes
1) DIN VDE 0636
Additional technical data for emergency switch equipment
Doepke
||
DE EN
