Dometic CF 11 User manual

CF 11, CF 16, CF 26
Compressor Cooler
Operating manual . . . . . . . . . . . . . . . . . . . . .5
Kompressor-Kühlbox
Bedienungsanleitung . . . . . . . . . . . . . . . . . 21
Glacière à compression
Notice d’utilisation . . . . . . . . . . . . . . . . . . .38
Nevera por compresor
Instrucciones de uso . . . . . . . . . . . . . . . . . .55
Geleira com compressor
Manual de instruções . . . . . . . . . . . . . . . . .72
Frigorifero a compressore
Istruzioni per l’uso . . . . . . . . . . . . . . . . . . . .89
Compressorkoelbox
Gebruiksaanwijzing. . . . . . . . . . . . . . . . . . 107
Kompressor-køleboks
Betjeningsvejledning . . . . . . . . . . . . . . . .123
Kylbox med kompressor
Bruksanvisning. . . . . . . . . . . . . . . . . . . . . .139
Kjøleboks med kompressor
Bruksanvisning. . . . . . . . . . . . . . . . . . . . . .155
Kompressori-kylmälaatikko
Käyttöohje . . . . . . . . . . . . . . . . . . . . . . . . . 171
Компрессорный холодильник
Инструкция по эксплуатации . . . . . . . . . 187
Przenośna lodówka
kompresorowa
Instrukcja obsługi . . . . . . . . . . . . . . . . . . . 205
Chladiaci box s kompresorom
Návod na obsluhu. . . . . . . . . . . . . . . . . . . 222
Kompresorový chladicí box
Návod k obsluze . . . . . . . . . . . . . . . . . . . . 239
Kompresszor hűtőláda
Használati utasítás. . . . . . . . . . . . . . . . . . . 255
EN
DE
FR
ES
PT
IT
NL
DA
SV
NO
FI
RU
PL
SK
CS
HU
COOLING BOXES
COOLFREEZE
CF11-16-26-O-16s.book Seite 1 Montag, 17. Dezember 2018 10:44 22

CF11-16-26-O-16s.book Seite 2 Montag, 17. Dezember 2018 10:44 22

CoolFreeze
3
POWER
FRIDGE FREEZER
ERROR
12 34 5 6 7
CF 11
1
ERROR
POWER
°
134 5 6 7
2
CF 16, CF 26
2
3
100-240V~AC
FUSE
12/24V DC
12 3
CF 11, CF 16, CF 26
CF11-16-26-O-16s.book Seite 3 Montag, 17. Dezember 2018 10:44 22

CoolFreeze
4
1
CF 11
4
1
CF 16, CF 26
5
1
3
2
6
1 2 3
4
5
6
7
1 2
8
CF11-16-26-O-16s.book Seite 4 Montag, 17. Dezember 2018 10:44 22

EN
CoolFreeze Explanation of symbols
5
Please read this manual carefully before starting the device. Keep it in a
safe place for future reference. If the device is passed on to another
person, this manual must be handed over to the user along with it.
The manufacturer cannot be held liable for damage resulting from improper usage
or incorrect operation.
Table of contents
1 Explanation of symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
2 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
3 Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
4 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
5 Technical description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
6 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
7 Cleaning and maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
8 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
9 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
10 Disposal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
11 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
1 Explanation of symbols
D
!
!
DANGER!
Safety instruction: Failure to observe this instruction will cause death
or serious injury.
WARNING!
Safety instruction: Failure to observe this instruction can cause death
or serious injury.
CAUTION!
Safety instruction: Failure to observe this instruction can lead to injury.
CF11-16-26-O-16s.book Seite 5 Montag, 17. Dezember 2018 10:44 22

EN
Safety instructions CoolFreeze
6
A
I
2 Safety instructions
2.1 General safety
!WARNING!
•Do not operate the cooling device if it is visibly damaged.
•If this cooling device's power cable is damaged, it must be replaced
by the manufacturer, customer service or a similarly qualified person in
order to prevent safety hazards.
•This cooling device may only be repaired by qualified personnel.
Improper repairs can lead to considerable hazards.
•This cooling device can be used by children aged 8 years or over, as
well as by persons with diminished physical, sensory or mental capac-
ities or a lack of experience and/or knowledge, providing they are
supervised or have been taught how to use the cooling device safely
and are aware of the resulting risks.
•Cleaning and user maintenance must not be carried out by children
without supervision.
•Children must not play with the cooling device.
•Children must be supervised to ensure that they do not play with the
cooling device.
•Always keep and use the cooling device out of the reach of children
under the age of 8 years.
•Do not store any explosive substances such as spray cans with a
flammable propellant in the cooling device.
!CAUTION!
•Disconnect the cooling device from the power supply
– before each cleaning and maintenance
– after every use
NOTICE!
Failure to observe this instruction can cause material damage and impair
the function of the product.
NOTE
Supplementary information for operating the product.
CF11-16-26-O-16s.book Seite 6 Montag, 17. Dezember 2018 10:44 22

EN
CoolFreeze Safety instructions
7
•Food may only be stored in its original packaging or in suitable
containers.
ANOTICE!
•Check that the voltage specification on the type plate corresponds to
that of the energy supply.
•Only connect the cooling device to a DC power supply in the vehicle
with the DC cable.
•Only connect the cooling device as follows:
– With the DC connection cable to a DC power supply in the vehicle
– Or with the AC connection cable to an AC power supply
•Connect the cooling device with an AC connection cable to the AC
power supply.
•Never pull the plug out of the socket by the cable.
•If the cooling device is connected to a DC outlet: Disconnect the
cooling device and other power consuming devices from the battery
before connecting a quick charging device.
•If the cooling device is connected to a DC outlet: Disconnect the
cooling device or switch it off when you turn off the engine. Otherwise
you may discharge the battery.
•The cooling device is not suitable for transporting caustic materials or
materials containing solvents.
•The insulation of the cooling device contains flammable cyclopentane
and requires special disposal procedures. Deliver the cooling device
at the end of its life-cycle to an appropriate recycling center.
2.2 Operating the cooling device safely
!CAUTION!
•Before starting the cooling device, ensure that the power supply line
and the plug are dry.
ANOTICE!
•Do not use electrical devices inside the cooling device unless they are
recommended by the manufacturer for the purpose.
•Do not place the cooling device near naked flames or other heat
sources (heaters, direct sunlight, gas ovens etc.).
CF11-16-26-O-16s.book Seite 7 Montag, 17. Dezember 2018 10:44 22

EN
Scope of delivery CoolFreeze
8
•Danger of overheating!
Ensure at all times that there is a minimum of 50 mm ventilation on all
four sides of the cooling device. Keep the ventilation area free of any
objects that could restrict the air flow to the cooling components.
Do not place the cooling device in closed compartments or areas with
none or minimal air flow.
•Ensure that the ventilation openings are not covered.
•Do not fill the inner container with ice or fluids.
•Never immerse the cooling device in water.
•Protect the cooling device and the cable against heat and moisture.
3Scopeofdelivery
•Compressor cooler
•Connection cable for DC connection
•Connection cable for AC connection
•Operating manual
•Shoulder strap (CF11)
4 Intended use
The compressor cooler is suitable for refrigerating and freezing foodstuffs.
The compressor cooler has been designed for operation using the following power
supply alternatives:
•The DC network of a car, boot or caravan
•A DC supply battery
•An AC power supply
The compressor cooler can also be used for camping. The compressor cooler may
not be exposed to rain.
!CAUTION! Health hazard!
Please check if the cooling capacity of the compressor cooler is suitable
for storing the food or medicine you wish to cool.
CF11-16-26-O-16s.book Seite 8 Montag, 17. Dezember 2018 10:44 22

EN
CoolFreeze Technical description
9
5 Technical description
The cooler can chill products, keep them cool as well as freeze them. A low
maintenance refrigerant circuit with compressor provides the cooling.
The cooler is portable.
For use in vehicles, the cooling device can be secured with a safety belt (CF11).
The cooler can withstand a short-term inclination of 30°, for example on boats.
An integrated battery monitor can be switched on to protect your vehicle battery
from discharging to dangerously low levels (see chapter “Using the battery monitor”
on page 14).
5.1 Operating and display elements
Control panel (fig. 1, page 3 and fig. 2, page 3)
Item Description Explanation
1 ON/OFF button Switches the cooling device on or off when the button is
pressed for between one and two seconds
2 POWER Operating display
LED lights up green Compressor is on; set
temperature not yet reached
LED lights up orange Set temperature has been
reached
LED flashes orange Voltage is too low
3 ERROR LED flashes red: Device is switched on but
not ready for operation
4 SET Selects the input mode
•Setting the temperature
•Set temperature unit (°Celsius or °Fahrenheit)
•Set the battery monitor
5 Display Displays the temperature in the refrigerator compartment
The first three digits of the four-digit display show the tem-
perature, the fourth digit indicates the temperature unit
(°C or °F).
When an error occurs, the display shows “Err1” or “Err2”.
CF11-16-26-O-16s.book Seite 9 Montag, 17. Dezember 2018 10:44 22

EN
Operation CoolFreeze
10
Connection sockets (fig. 3, page 3)
6Operation
The cooling device is equipped with an LED interior light that remains on when the
voltage is applied. The energy consumption of the LED interior light is extremely low
and is negligible compared to the total energy consumption of the device.
6.1 Before initial use
I
6.2 Energy saving tips
•Choose a well ventilated location which is protected from direct sunlight.
•Allow warm food to cool down first before placing it in the device to keep cool.
•Do not open the cooling device more often than necessary.
•Do not leave the lid open for longer than necessary.
•Defrost the cooling device as soon as a layer of ice forms.
•Avoid unnecessarily low temperature settings.
6 + Press once to increase the selected value
7 – Press once to decrease the selected value
Item Description
1 AC voltage supply inlet
2 AC Fuse holder
3 DC voltage supply inlet
NOTE
Before starting your new cooler for the first time, you should clean it
inside and outside with a damp cloth for hygienic reasons (see also
chapter “Cleaning and maintenance” on page 17).
Item Description Explanation
CF11-16-26-O-16s.book Seite 10 Montag, 17. Dezember 2018 10:44 22

EN
CoolFreeze Operation
11
6.3 Locking the cooling device
➤Close the lid.
➤Press the latch (fig. 4or fig. 51, page 4) down, until it latches in
place audibly.
6.4 Connecting the cooling device
The cooler can be operated with 12 Vgor 24 Vgor 100 – 240 Vw.
A
➤Place the cooler on a firm base.
Make sure that the ventilation slots arenot covered and that the heated air can be
dissipated.
Connecting to a battery (vehicle or boat)
A
I
➤Plug the DC connection cable (fig. 62, page 4) into the DC voltage inlet of the
cooler (fig. 33, page 3).
➤Connect the connection cable to the DC power outlet.
NOTICE! Danger of Damage!
•Disconnect the cooler and other consumer units from the battery
before you connect the battery to a quick charging device.
•Overvoltage can damage the electronics of the device.
NOTICE!
For protection ofthe device the DC cable suppliedincludes a fuse inside
the plug. Do not remove the fused DC plug. Only use the DC cable sup-
plied.
NOTE
If you connect the cooler to the DC socket, remember that the ignition
must be turned on to supply it with power.
CF11-16-26-O-16s.book Seite 11 Montag, 17. Dezember 2018 10:44 22

EN
Operation CoolFreeze
12
Connecting to an AC power supply (e.g. at home or in the office)
D
The coolers have an integrated multi-voltage power supply with priority circuit for
connecting to an AC voltage source. The priority circuit automatically switches the
cooler to AC operation, if the device is connected to an AC power supply, even if the
DC connection cable is still attached.
➤Plug the AC connection cable (fig. 63, page 4) into the AC voltage socket of
the cooler (fig. 31, page 3).
➤Connect the connection cable to the AC power outlet.
6.5 Secure the cooling device in the vehicle (CF11)
➤Open the lid of the cooling device.
➤Place the safety strap into the guide (fig. 61, page 4) of the cooling device.
➤Close the lid.
➤Engage the safety strap and tighten it.
6.6 Switching on the cooling device
A
DANGER! Danger of electrocution
•Never handle plugs and switches with wet hands or if you are
standing on a wet surface.
•If you are operating your cooler on board a boat with an AC power
supply,you must install a residualcurrentcircuit breaker between the
power supply and the cooler.
Seek advice from a trained technician.
NOTICE! Risk of damage!
•Always ensure sufficient ventilation so that the heatgenerated during
operation can dissipate. Ensure that the ventilation slots are not
covered. Make sure that the device is sufficiently far away from walls
and other objects so that the air can circulate.
•Ensure that the items placed in the cooler are suitable for cooling to
the selected temperature.
•Disconnect the cooler and other electric consumers from the battery
before you connect the battery to a quick charging device. Overvolt-
age can damage the electronics of the device.
CF11-16-26-O-16s.book Seite 12 Montag, 17. Dezember 2018 10:44 22

EN
CoolFreeze Operation
13
For safety reasons, the cooler is equipped with an electronic system to prevent the
polarity being reversed.This protects the cooler against reversed polarity when
connecting to a battery and against short circuiting.
fig. 1, page 3, fig. 2, page 3
➤Press the ON/OFF button (1)for three seconds.
✓The “POWER” LED (2) is lit green.
Once the cooling device has reached the saved temperature, the LED lights up
orange.
✓The display (5) switches on and shows the current interior temperature.
✓The cooler starts cooling the interior.
6.7 Setting the temperature
fig. 1, page 3, fig. 2, page 3
➤Press the “SET” (4) button once.
➤Use the “+” (6) and “–” (7)buttons to set the cooling temperature.
✓The set cooling temperature then appears in the display for a few seconds. The
display flashes several times before it returns to the current temperature.
6.8 Selecting the temperature unit
fig. 1, page 3, fig. 2, page 3
You can switch the temperature display between Celsius and Fahrenheit. To do this,
proceed as follows:
➤Switch on the cooler.
➤Press the “SET” button (4) twice.
➤Use the “+” (6) or “–” (7) buttons to set the temperature unit °Celsius or
°Fahrenheit.
✓The selected temperature unit then appears in the display for a few seconds. The
display flashes several times before it returns to the current temperature.
CF11-16-26-O-16s.book Seite 13 Montag, 17. Dezember 2018 10:44 22

EN
Operation CoolFreeze
14
6.9 Using the battery monitor
A
The cooling device is equipped with a multi-level battery monitor that protects your
vehicle battery against excessive discharging when the device is connected to the
12 V vehicle electrics.
If the cooler is operated when the vehicle ignition is switched off, the cooler switches
off automatically as soon as the supply voltage falls below a set level. The cooler will
switch back on once the battery has been recharged to the restart voltage level.
I
In HIGH mode, the battery monitor responds faster than at the levels “LOW” and
“MED” (see the following table).
This is how to select the battery monitor mode (fig. 1, page 3 and fig. 2, page 3):
➤Switch on the cooler.
➤Press the “SET” button (4) three times.
➤Use the “+” (6) and “–” (7) buttons to select the battery monitor mode.
✓The selected mode then appears in the display for a few seconds. The display
flashes several times before it returns to the current temperature.
NOTICE! Beware of damage
When switched off by the battery monitor, the battery will no longer be
fully charged. Avoid starting repeatedly or operating electric consumers
without longer charging phases. Make sure that the battery is
recharged.
NOTE
When the cooling device is switched off by the battery monitor due to
low voltage, the display (fig. 15, page 3, fig. 25, page 3) switches
off and the “Power” LED (fig. 12, page 3, fig. 22, page 3) flashes
orange.
Battery monitor mode LOW MED HIGH
Cut-off voltage at 12 V 10.1 V 11.4 V 11.8 V
Cut-in voltage at 12 V 11.1 V 12.2 V 12.6 V
Cut-off voltage at 24 V 21.5 V 24.1 V 24.6 V
Cut-in voltage at 24 V 23.0 V 25.3 V 26.2 V
CF11-16-26-O-16s.book Seite 14 Montag, 17. Dezember 2018 10:44 22

EN
CoolFreeze Operation
15
I
6.10 Switching off the cooling device
fig. 1, page 3, fig. 2, page 3
➤Empty the cooling device.
➤Switch the cooling device off: Press the ON/OFF button (1) for three seconds.
➤Disconnect the plug.
If you do not want to use the cooling device for a longer period of time:
➤Leave the lid slightly open. This prevents odours from building up.
6.11 Defrosting the cooling device
Humidity can form frost in the interior of the cooling device or on the evaporator. This
reduces the cooling capacity.
Defrost the device in good time to avoid this.
A
To defrost the cooling device, proceed as follows:
➤Empty the contents.
➤If necessary, put them in another cooling device to keep them chilled.
➤Switch off the device.
➤Leave the lid open.
➤Wipe off the condensate.
NOTE
When the cooler is supplied by the starter battery, select the battery
monitor mode HIGH. When the cooler is connected to a supply battery,
the battery monitor mode LOW will suffice.
If you wish to operate the cooling device from the AC mains, set the
battery monitor to LOW.
NOTICE! Risk of damage to the device!
Never use hard or sharp tools to remove ice or to free objects frozen
onto the device.
CF11-16-26-O-16s.book Seite 15 Montag, 17. Dezember 2018 10:44 22

EN
Operation CoolFreeze
16
6.12 Replacing the AC fuse
D
➤Remove the connection cable.
➤Pry out the fuse insert (fig. 32, page 3) with a screwdriver.
➤Replace the defective fuse with a new one that has the same rating (T4AL 250 V).
➤Press back the fuse insert into the housing.
6.13 Replacing the plug fuse (12/24 V)
fig. 7, page 4
➤Pull the adapter sleeve (4) off of the plug.
➤Unscrew the screw (5) out of the upper half of the housing (6).
➤Carefully lift the upper half of the housing off the lower half (1).
➤Take out the contact pin (3).
➤Replace the defective fuse (2) with a new one that has the same rating
(T8 A 32 V).
➤Re-assemble the plug in the reverse order.
I
6.14 Replacing the bulb (CF16, CF26)
➤Press the switch pin (fig. 82, page 4) downwards so that the transparent part
(fig. 81, page 4) of the lamp can be removed at the front.
➤Replace the light bulb.
➤Press the transparent part of the lamp back into the housing.
DANGER! Danger of electrocution!
Disconnect the connection cable before you replace the device fuse.
NOTE – Internal DC fuse
There is an additional DC fuse inside the device (Automotive standard
blade fuse, 10 A). This fuse can only be replaced by an authorised repair
centre.
CF11-16-26-O-16s.book Seite 16 Montag, 17. Dezember 2018 10:44 22

EN
CoolFreeze Cleaning and maintenance
17
7 Cleaning and maintenance
!
A
➤Occasionally clean the device interior and exterior with a damp cloth.
➤Make sure that the air inlet and outlet vents on the device are free of any dust and
dirt, so that heat can be released and the device is not damaged.
8 Troubleshooting
WARNING!
Always disconnect the device from the power supply before you clean
and service it.
NOTICE! Risk of damage
•Never clean the cooler under running water or in dish water.
•Do not use abrasive cleaning agents or hard objects during cleaning
as these can damage the cooler.
Problem Possible cause Suggested remedy
Device does not function,
“POWER” LED does not light
up.
No voltage is flowing
from the DC power
socket in your
vehicle.
The ignition must be switched on in
most vehicles to supply current to
the on-board power socket.
No voltage present in
the AC voltage
socket.
Try using another plug socket.
The device fuse is
defective.
Replace the device fuse, see chapter
“Replacing the AC fuse” on page 16.
The integrated mains
adapter is defective.
This can only be repaired by an
authorised repair centre.
CF11, CF26: The device
does not cool (plug is
inserted, “POWER” LED is
lit).
Defective
compressor.
This can only be repaired by an
authorised repair centre.
CF11, CF16: The device
does not cool (plug is
inserted, “POWER” LED
flashes, display is empty).
The voltage is too low
at the 12/24 V
socket.
Check the battery and charge if
necessary.
Check the cables and connections.
CF11-16-26-O-16s.book Seite 17 Montag, 17. Dezember 2018 10:44 22

EN
Warranty CoolFreeze
18
9Warranty
The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country (see the back of the instruction manual for the
addresses) or your retailer.
For repair and warranty processing, please include the following documents when
you send in the device:
•A copy of the receipt with purchasing date
•A reason for the claim or description of the fault
When operating from the
DC outlet:
The ignition is on and the
device is not working and
the “POWER” LED is not lit.
The DC outlet is dirty.
This results in a poor
electrical contact.
If the plug of your cooler becomes
very warm in the DC outlet, either
the DC outlet must be cleaned or the
plug has not been assembled
correctly.
The fuse of the DC
plug has blown.
Replace the fuse in the DC plug, see
chapter “Replacing the plug fuse
(12/24 V)” on page 16.
The DC fuse inside
the device has blown.
This can only be repaired by an
authorised repair centre.
The vehicle fuse has
blown.
Replace the vehicle’s DC outlet fuse.
Please refer to your vehicle’s operat-
ing manual.
CF11: The “ERROR” LED
flashes and the display
shows “ERR1” or “ERR2”.
The appliance has
switched off due to
an internal fault.
This can only be repaired by an
authorised repair centre.
CF16: The display shows an
error message (e.g. “Err1”)
and the device does not
cool.
CF26: “ERROR” LED flashes
for longer than 2 minutes, as
follows: 3 flashes, pause,
3flashes,pause,..
Problem Possible cause Suggested remedy
CF11-16-26-O-16s.book Seite 18 Montag, 17. Dezember 2018 10:44 22

EN
CoolFreeze Disposal
19
10 Disposal
➤Place the packaging material in the appropriate recycling waste bins wherever
possible.
MIf you wish to finally dispose of the product, ask your local recycling centre
or specialist dealer for details about how to do this in accordance with the
applicable disposal regulations.
11 Technical data
CF11 CF16 CF26
Ref. no.: 9600005337
9600005338
9600005339
9600005340
9600005341
9600005343
Voltage: 12/24 Vgand 100 – 240 Vw
Power consumption: 30 W 35 W 35 W
Rated current:
100 Vw:
240 Vw:
12 Vg:
24 Vg:
0,5 A
0,2 A
2,2 A
1,3 A
0,5 A
0,2 A
2,9 A
1,7 A
0,5 A
0,2 A
2,9 A
1,7 A
Cooling range: +10 °C to –18 °C
Energy efficiency class: A++
Category: Category 1
(refrigerator with one or more fresh-food storage
compartments)
Climate class: N or T
Ambient temperature: +16 °C to +43 °C
Noise emission: 46 dB (A) 48 dB (A) 48 dB (A)
Gross capacity: 11 l 16 l 23 l
Capacity: 10,5 l 15 l 21 l
Refrigerant quantity: 28 g 30 g 28 g
CO2 equivalent: 0,040 t 0,043 t 0,040 t
CF11-16-26-O-16s.book Seite 19 Montag, 17. Dezember 2018 10:44 22

EN
Technical data CoolFreeze
20
I
The refrigerant circuit contains R134a.
Contains fluorinated greenhouse gases
Hermetically sealed equipment
Global warming potential
(GWP): 1430
Dimensions (W x H x D): 235 x 358 x
540 mm
549,5 x 366 x
260 mm
550 x 425 x
260 mm
Weight: 8,5 kg 9,5 kg 10,5 kg
Inspection/certification:
NOTE
If the ambient temperature is above +32 °C, the minimum temperature
cannot be attained.
CF11 CF16 CF26
4
CF11-16-26-O-16s.book Seite 20 Montag, 17. Dezember 2018 10:44 22