Dräger Medical Fabius GS Instruction Manual

11/18/03
SP00298
Revision -
Because you care
Emergency Care • OR/ Anesthesia • Critical Care • Home Care
Field Service Procedure
Assembly and Installation of Auxiliary Fresh Gas Outlet on Fabius GS®
Australia/New Zealand
Anesthesia
RETURN TO CD-ROM TABLE OF CONTENTS
RETURN TO SERVICE PROCEDURE TABLE OF CONTENTS

Dräger Medical, Inc. SP00298 Revision - Released
All rights reserved. Copyright reserved.
SP298.fm 09.12.03
1
Service Procedure Auxiliary Fresh Gas Outlet
CYLINDER MOUNTING
KIT FOR TROLLEY
1 Assembly Instruc-
tions
In order to accommodate either left side mounted or right side mounted
breathing systems on the Fabius GS, the Auxiliary Fresh Gas Outlet need to
be assembled to match mounting location. The provided material and design
allows for either configuration.
1.1 List of Parts and
Mounting Hardware
1.2 Assembly Instruc-
tions
For pictorial guidance in the assembly, refer to Fig. 1.
Warning:
Any person involved with the setup, operation, or maintenance of the
Fabius GS anesthesia machine must be thoroughly familiar with the
instruction manual for this product.
ITEM QUANTITY PART NUMBER DESCRIPTION
1 1 4118611 Manifold, Pop Off Valve, Fresh Gas
2 1 4118345 Bracket, Support, Auxiliary Fresh Gas
3 1 4117405 Plate, Slide, GCX, Black
4 2 HW09048 Screw, Btn Hd, Skt, 1/4 X 20 X .75 in. L, SS
5 2 HW51001 Nut, Acorn, 1/4 - 20, SS
6 2 HW65010 Washer, Lock, 1/4 in., SS
7 2 HW09106 Screw, Btn Hd, Skt, M4 X 10mm L, SS
8 2 HW65011 Washer, Lock, #8, SS
9 1 2600170 Pipe, Fresh Gas
RETURN TO CD-ROM TABLE OF CONTENTS
RETURN TO SERVICE PROCEDURE TABLE OF CONTENTS

All rights reserved. Copyright reserved.
SP298.fm 09.12.03
2 Dräger Medical, Inc. SP00298 Revision - Released
Auxiliary Fresh Gas Outlet Service Procedure
Fig. 1 Auxiliary Fresh Gas Outlet Assembly
1. Using two button head screws (4), two lock washers (6), and two acorn
nuts (5), mount the Auxiliary Fresh Gas Bracket (2) to the GCX Slide
Plate (3) as shown in Fig. 1.
2. Using two button head screws (7) and two lock washers (8), attach the
Pop Off Valve Manifold (1) to the Auxiliary Fresh Gas Bracket (2).
3. Refer to Fig. 2 for left side assembly configuration. Refer to Fig. 3 for right
side assembly configuration.
Fig. 2 Left Side Assembly Configuration
RETURN TO CD-ROM TABLE OF CONTENTS
RETURN TO SERVICE PROCEDURE TABLE OF CONTENTS

Dräger Medical, Inc. SP00298 Revision - Released
All rights reserved. Copyright reserved.
SP298.fm 09.12.03
3
Service Procedure Auxiliary Fresh Gas Outlet
Fig. 3 Right Side Assembly Configuration
4. Verify the Machine is in Standby mode and all flow control valves are
closed. Remove gas supplies and depressurize system.
5. Slide the Auxiliary Fresh Gas Outlet Assembly up into the appropriate
front GCX rail in the machine, and tighten the thumbscrew (part of item
3). (The shear tabs on either side of the slide plate may need to be filed
down to allow the plate to slide freely on the rail.)
6. Join the machine’s Fresh Gas Hose to the rear connector on the Auxiliary
Fresh Gas Outlet Assembly. Attach the Fresh Gas Pipe to the Auxiliary
Fresh Gas Outlet. Left side installation is shown in Fig. 4; right side instal-
lation is shown in Fig. 5.
1.3 Performance Test 1. Perform Fresh Gas Leak Test utilizing Fresh Gas Leak Test Device (P/N
4113119) modified via gas test connector (P/N 4117361).
2. Connect a digital pressure manometer to the Fresh Gas Leak Test Device
and connect the test connector to the open end of the Fresh Gas Pipe.
3. Apply 50 cmH2O pressure to the system.
4. After thirty (30) seconds, the pressure on the manometer should be > 40
cmH2O.
5. Disconnect the test fixture from the Fresh Gas Pipe.
6. Pressurize the oxygen system.
7. Set oxygen delivery for 10 L/min flow.
8. Occlude the Auxiliary Fresh Gas Outlet momentarily and verify that the
safety relief valve opens as detected by an audible sound (rattle).
9. Close oxygen flow control and set the unit to standby.
RETURN TO CD-ROM TABLE OF CONTENTS
RETURN TO SERVICE PROCEDURE TABLE OF CONTENTS

All rights reserved. Copyright reserved.
SP298.fm 09.12.03
4 Dräger Medical, Inc. SP00298 Revision - Released
Auxiliary Fresh Gas Outlet Service Procedure
1.4 Installation Instruc-
tions
1. Connect the open end of the Fresh Gas Hose to the COSY breathing sys-
tem.
2. Pressurize the oxygen system, activate the O2 Flush and verify the fresh
gas flow.
NOTE:
If you are using an A-Cone switch, install it on the Auxiliary Fresh Gas Out-
let and connect the Fresh Gas Hose to one of the A-Cone ports. Set the
selector lever for the appropriate port.
RETURN TO CD-ROM TABLE OF CONTENTS
RETURN TO SERVICE PROCEDURE TABLE OF CONTENTS

Dräger Medical, Inc. SP00298 Revision - Released
All rights reserved. Copyright reserved.
SP298.fm 09.12.03
5
Service Procedure Auxiliary Fresh Gas Outlet
Fig. 4 Auxiliary Fresh Gas Outlet Left Side Mount
RETURN TO CD-ROM TABLE OF CONTENTS
RETURN TO SERVICE PROCEDURE TABLE OF CONTENTS

All rights reserved. Copyright reserved.
SP298.fm 09.12.03
6 Dräger Medical, Inc. SP00298 Revision - Released
Auxiliary Fresh Gas Outlet Service Procedure
Fig. 5 Auxiliary Fresh Gas Outlet Right Side Mount
RETURN TO CD-ROM TABLE OF CONTENTS
RETURN TO SERVICE PROCEDURE TABLE OF CONTENTS

In the United States: In all other countries:
Draeger Medical, Inc. Dräger Medical AG & Co. KGaA
3136 Quarry Road Moislinger Allee 53 – 55
Telford, PA 18969 D-23542 Lübeck
USA Germany
Tel: [phone] Tel: (++49) (0) 1805-3723437
[phone] Fax: (++49) 451/882 - 3779
Fax: [phone]
Assembly and Installation of Auxiliary Fresh Gas Outlet on Fabius GS® Australia/New Zealand en
SP00298
Subject to change without notice.
Will not be replaced in the event of modifications.
RETURN TO CD-ROM TABLE OF CONTENTS
RETURN TO SERVICE PROCEDURE TABLE OF CONTENTS