Dräger Babylog VN800 User manual

Pocket Guide
Babylog® VN800 /
Babylog® VN600
Software version 1.n
D-21866-2020

QUICK GUIDE BABYLOG® VN800 / BABYLOG® VN60002 |
Product description 04
Operating concept 08
Getting started 12
Operation 16
Alarms 20
Monitoring 22
The Babylog® VN800 / VN600 Pocket Guide is not a replacement or substitute for the Instructions for Use.
It is for informational purposes only. Any use of the device requires full understanding and strict observation
of the Instruction for Use.
The availability of functionality depends on the country and availability. Options may not be included in a
present device or may come at extra costs.
The pocket guide may not reect the latest software version of the device.
Content

|03
Intended use
The intensive care ventilator Babylog is
intended for the ventilation of neonates,
infants, and children from 0.4 kg (0.88 lbs)
up to 20 kg (44 lbs) or up to 6 years of
age. This device provides mandatory
ventilation modes and ventilation modes for
supporting spontaneous breathing and also
ventilation monitoring.

QUICK GUIDE BABYLOG® VN800 / BABYLOG® VN60004 |
Product description
Intensive care Ventilator
Display unit
Ventilation unit
Gas supply unit GS500
Power supply unit PS500
Trolley with 4 brakes
Babylog® VN800

|05
Product description
Display unit, front
Alarm bar Touch screen
Indicator for power
and batteries
Alarm silence
2 minutes
ON/OFF switch Rotary knob
touch – turn – conrm

QUICK GUIDE BABYLOG® VN800 / BABYLOG® VN60006 |
Product description
Display unit, rear
USB ports HDMI port
USB portUSB port
LAN port
COM ports
Swiveling of
display unit

|07
Product description
Ventilation unit, front
Flap
Expiration valve
Water trap
Inspiration valve
Emergency air intake
Operation display
of ventilation
Mu󹵶er
Exhaust
Nebulizer port

QUICK GUIDE BABYLOG® VN800 / BABYLOG® VN60008 |
Operating concept
Screen, general structure
Header
bar
Monitoring
area
Therapy
bar
Main menu
bar

|09
Operating concept
Main screen
Buttons to open the
– Alarms dialog
– Views dialog
– Trends/data dialog
– Sensors dialog
– Procedures dialog
– System set up dialog
Patient
category
Ventilation mode /
Therapy type
Alarm messagesPower supply /
charge status
indicator of
battery
Button to open
other modes
Button to
– Start/Stop ventilation
– Start/Stop O2therapy

QUICK GUIDE BABYLOG® VN800 / BABYLOG® VN60010 |
Operating concept
Using the screen − Colours
Alarms
The following colours are used to identify the priority of alarms:
Colour Alarm priority Action required
Red High !!! Immediate action is necessary in order to avert an acute danger
Yellow Medium !! Prompt action is necessary in order to avert a danger
Turquoise Low ! Attention is necessary

|11
Operating concept
Using the screen − Colours
Touch – Turn – Conrm
Rotary knob
If the device is turned on, the rotary knob is back lit
with a colour.
Orange The selected function or setting must
be conrmed by pressing the rotary knob.
10 seconds before the time during which
the conrmation may be performed ends,
the background lighting ashes.
Blue After the device is turned on, the background
lighting shines for 2 seconds.
Touch
the control element.
The control element
turns orange.
Turn
the rotary knob to the right or
to the left to make the setting.
The value is displayed in the
control element.
Conrm
by pressing the rotary knob.
The setting is applied, and
the control element turns gray
or blue again.
Selecting and setting parameters and functions

QUICK GUIDE BABYLOG® VN800 / BABYLOG® VN60012 |
Getting started
Turning on the device
Prerequisites:
The accessories needed
for operations on the patient
are connected.
The mains power supply and
the gas supply are connected.
The main switch is turned on.
1. Press the ON/OFF key on the
display unit. The system is started.
The start dialog is displayed.
2. Touch the New patient button
if a new patient is admitted.
or
3. Touch the Current patient button
to continue with existing settings.
Ventilation unit,
left side:
Main switch
1.
3.
2.

|13
Getting started
System test
Performing the Breathing circuit test
1. Touch the button in the Breathing
circuit test line.
2. Select the breathing circuit used
from the pick list and the type of
humidification.
3. Confirm with the rotary knob.
4. Follow the instructions in the
information field and touch the
button OK when asked to do so.
1.
3.
2.
4.
2.
1.
Starting the system test
1. Touch the Start button in the
System test line.
2. Confirm with the rotary knob.
3. Answer the questions in the
information field by touching
the Yes or No button.
After a successful system test
has been performed, a message
appears for continuing the breathing
circuit test. Proceed with 'Yes'.
Breathing circuit test
1.

QUICK GUIDE BABYLOG® VN800 / BABYLOG® VN60014 |
Getting started
Starting the therapy (based on the patient height)
1. Touch the button for the
relevant patient category.
2. Touch the button for the
relevant therapy type (Tube,
NIV, O2therapy).
3. Confirm with the rotary knob.
4. Check the therapy settings
(ventilation mode, ventilation
parameter, alarm limits) and
touch the button Start
ventilation.
5. Confirm with the rotary knob.
1.
1.
3.
3./5.
1. Touch the button for the
relevant patient category.
2. Confirm with the rotary knob.
3. Touch the button for weight.
4. Set the body height by turning
the rotary knob and push to
confirm.
5. Touch the button for the relevant
therapy type (Tube, NIV,
O2therapy).
6. Confirm with the rotary knob.
7. Check the alarm limits and touch
the button Start ventilation.
8. Confirm with the rotary knob.
Starting the therapy (based on the patient category)
2./4./6./8.
5.
7.
4.
2.

|15
Getting started
Therapy Quick start ventilation
In an emergency situation, therapy
can be started immediately without
operational readiness being checked.
1. Touch the button Quick start
ventilation. The patient and
therapy step is displayed.
2. Press the rotary knob.
The therapy is started.
The main screen is displayed.
1.
2.

QUICK GUIDE BABYLOG® VN800 / BABYLOG® VN600
1. Touch the corresponding therapy
control (colour turns orange).
2. Set the value by turning the rotary
knob and push to confirm.
16 |
Operation
Changing the ventilation mode
Setting ventilation parameters
1./2.
3.
1. Touch the relevant tab.
2. The colour of the tab turns orange
(if necessary, adjust the ventilation
parameter).
3. Confirm with the rotary knob.
The color of the tab turns white.
2.
1.

|17
Operation
Advanced settings
Changing the therapy type during therapy
2.
1. Touch the button Advanced
settings. The advanced settings
of the selected ventilation mode
are displayed and can be
congured.
2. The current settings are displayed
in an information field next to the
button.
1. Touch the eld for the therapy
type in the header bar.
2. Touch the button of the relevant
therapy type
– Tube
– NIV
– O2therapy
3. Conrm with the rotary knob.
The device is in standby mode.
4. Start the therapy by touching the
Start ventilation button.
1.
1.
3.
2.
4.

QUICK GUIDE BABYLOG® VN800 / BABYLOG® VN60018 |
Operation
Non-invasive ventilation (NIV)
O2therapy
In the Adult and Pediatric patient
patient categories, all the ventilation
modes can be selected. In the
Neonate patient category, only the
SPN-CPAP and PC-CMV
ventilation modes can be selected.
Patient-side accessories such as
oxygen masks or nasal cannulas
can be used for O2therapy.
During O2therapy, only the O2
concentration, the inspiratory flow,
and the inspiratory pressure are
monitored.
The alarm limits for the
parameters VT, MVe, RR, Paw,
and Tapn are not active. The
alarm limits for O2monitoring are
automatically set by the device.

|19
Operation
Interrupting therapy
1. Touch the button Stop ventilation
in the therapy bar. A pop-up window
opens.
2. Touch the button Stop ventilation.
3. Confirm with the rotary knob.
4. The following message is
displayed in the header bar:
Standby mode activated.
5. Touch the Alarm reset button in
the header bar.
6. Confirm with the rotary knob.
1.
2.
4.
3./6.
5.

QUICK GUIDE BABYLOG® VN800 / BABYLOG® VN60020 |
Alarms
Display of alarms – Optical and acoustic alarm signals
Display of alarms – Conrming alarm messages
Alarm bar
Alarm message eld
Blinking
parameter eld
More alarms
Alarm reset
The alarm logbook lists all alarms
that are active and the ones
which are no longer active.
1. Open the Alarm dialog page.
2. Touch the Reset all alarms
button.
3. Conrm with the rotary knob.
The primary acoustic alarm
system produces different alarm
signals. The acoustic alarm
signal can be suppressed for
2 minutes maximum.
1. Press the alarm silence
key.
1.
3.
1.
2.