Dreame D10s Plus User manual

D10s Plus
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch

2
English
3 –29
Čeština
30 –58
Slovenčina
39 –87
Magyar
88 –115
Deutsch
116 –145

3
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
󹘯󹘰󹘱󹘲󹘳www.alza.co.uk/kontakt
✆[phone]
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

4
Safety Information
To avoid electric shock, fire or injury caused by improper use of the appliance, please
read the user manual carefully before using the appliance and keep it for future
reference.
Usage Restrictions
•This product should not be used by children younger than 8 years old nor person
with physical, sensory, intellectual deficiencies, or limited experience or
knowledge without the supervision of a parent or guardian to ensure safe
operation and to avoid any risks. Cleaning and maintenance shall not be
performed by children without supervision.
•Children shall not play with this product. Ensure children and pets are kept at a
safe distance from the robot while it is operating.
•If the power cord becomes damaged or broken, stop using it immediately and
contact after-sales service.
•This product is for floor cleaning in a home environment only. Do not use it
outdoors, on non-floor surfaces, or in a commercial or industrial setting.
•Do not use the robot in an area suspended above ground level without a
protective barrier.
•Do not place the robot upside down. Do not use the LDS cover, robot cover, or
bumper as a handle for the robot.
•Do not use the robot at an ambient temperature above 40°C or below 0°C or on
a floor with liquids or sticky substances.
•Pick up any cables from the floor before suing the robot to prevent it from
dragging them while cleaning.
•Remove fragile or small items from the floor to prevent the robot from bumping
into the damaging them.
•Keep hair, fingers and other body parts away from the suction opening of the
robots.
•To prevent damage or harm from dragging, clear any loose objects from the floor
and remove cables or power cords along the cleaning path before operating the
appliance.
•Keep the brush cleaning tool out of reach of children.
•Do not place children, pets or any item on top of the robot regardless of whether
it is stationary or moving.
•Do use the robot to clean any burning objects. Do not use the robot to pick up
flammable or combustible liquids, corrosive gases, or undiluted acids or solvents.
•Do not vacuum hard or sharp objects. Do not use the appliance to pick up objects
such as stones, large pieces of paper or any item that may clog the appliance.
•Make sure the robot is turned off and the auto-empty base is unplugged before
cleaning or performing maintenance.

5
•Do not use a wet cloth to wipe or any liquid to rinse the robot and auto-empty
base. Washable parts must be dried completely before installing and using them.
•Make sure the robot is turned off when being transported and kept in its original
packaging if possible.
•Please use this product in accordance with the instructions in the User Manual.
Users are responsible for any loss or damage that arise from improper use of this
product.
Batteries and Charging
•Do not use any third-party battery or auto-empty base. Use only with RCS2
supply unit.
•Do not attempt to disassemble, repair, or modify the battery or auto-empty base
on your own.
•Do not place the auto-empty base near a heat source.
•Do not use a wet cloth or wet hands to wipe or clean the base’s charging
contacts.
•Do not improperly dispose of old batteries. Unneeded batteries should be
discarded at an appropriate recycling facility.
•If the robot will not be used for an extended period, fully charge it, then turn it off
avoid over-discharging the battery.
•This product contain batteries that can only be replaced by qualified technicians
or after-sales service.
Laser Safety Information
•The laser sensor in this product meets the IEC 60825-1: 2014 Standard for Class 1
laser products. Please avoid direct eye contact with it during use.
Product Overview
Accessories
Cleaning Tool
Side Brush
Power Cord

6
Water Tank
Mop Pad
Dust Collection Bag
(Replacement)
Auto-Empty Base
Product Overview
Robot
Spot Cleaning Button
•Press briefly to start spot cleaning
Power/Clean Button
•Press and hold for 3 seconds to turn on
or off
•Press briefly to start cleaning after the
robot is turned on
Dock Button
•Press to send the robot back to the base
•Press and hold for 3 second sto disable
Child Lock
Status Indicator
•Solid White: Cleaning or cleanup is completed
•Blinking Orange: Error
•Solid Blue: Camera monitoring enabled
Reset button
•Press and hold for 3 seconds to restore
the robot factory settings
Cover
Wi-Fi Indicator
Cleaning Tool
Air Outlet/Speaker

7
Robot Sensors
Auto-Empty Base
Laser Distance Sensor (LDS)
Bumper
AI Visual Sensor
Universal Wheel
Charging Contacts
Cliff Sensors
Main Brush
Brush Guard Clips
Auto-empty Vents
Main Wheel
Side Brush
Upper Cover
Status Indicator
White: The base is plugged in
Breathing White: Robot is charging
Blinknig Orange: The base han an error
Dust Cabinent
Signaling Area
Charging Contacts
Auto-empty Vents

8
Open the upper cover
Back
Bottom
Dust Bin
Dust Collection Bag
Slot
Filter
Cord Storage Slot
Power Cord Socket
Mounting Screw
Air Duct Cover
Bin Clip
Bin Cover Release Clip
Filter
Auto-empty Vents

9
Dust Collection Bag
Note: Due to the factory setting, a new dust collection bag has been installed inside
already.
Mopping Module
Preparing Your Home
Tidy up items such as power cords, cloths, slippers, and toys to improve the efficiency of
the robot.
Dust Collection Bag Handle
Water Tank
Mop Pad
Water Tank Release Clip
Water Inlet
Attaching Area

10
Before cleaning, place a physical barrier at the edge of the stairs and sofa to ensure
smooths operation.
Open the door of the room to be cleaned, and put the furniture in its proper place to
leave more space.
With the AI visual sensor, the robot can better recognize and avoid obstacles such as
power cords, shoes, and socks. For best performance, make sure that all areas to be
cleaned are well-lit.
Note:
•When operating the robot for the first time, follow it around while cleaning to
remove any potential obstacles in time.
•To prevent the robot from not recognizing areas that need to be cleaned, do not
stand in front of the robot, threshold, hallway, or narrow places.

11
Before Use
Remove the protective strips
Install the side brush
Note: Install the side brush it clicks into place.
Connect to a power outlet and start charging
Place the base on level ground against the wall and connect it to power outlet. Place the
robot onto the base to charge. The robot will turn on automatically and begin charging.
It is recommended to fully charge your robot before first time use.
Put away the power cord
into the cord storage slot
Withing the Good
Wi-Fi Range

12
Note:
•Keep the immediate area 1.5 m in front of the base and 0.5 m to its both sides
clear of objects.
•Make sure that no objects might block the signalling area.
About the Auto-Empty Base
It is recommended that the robot set out from the base before cleaning. Do not move
the base while the robot is cleaning. This ensures that the robot returns to base
smoothly.
After the robot completes the cleaning task and automatically returns to the base, the
base will start auto empty. More settings can be operated on the app.
Connecting with the Dreamehome App
This product works with the Dreamhome app, which can be used to control your device.
Download the Dreamehome App
Scan the QR code on the robot, or search “Dreamhome” in the app store to download
and install the app based on your needs.
Add Device
Open the Dreamhome app, tap “ ” in the upper right, and then scan the QR code above
again to add “DreameBot D10s Plus”. Please follow the prompts to finish the Wi-Fi
connection.
Download
the Cover

13
Note:
•Only 2.4 GHz Wi-Fi networks are supported.
•Due to upgrades in the app software, the actual operations may be different
form the statements in this manual. Please follow the instructions based on the
current app version.
Reset Wi-Fi
Simultaneously press and hold the buttons and until you hear a voice say, “Waiting
for the network configuration.” Once the Wi-Fi indicator is blinking slowly, the Wi-Fi has
been successfully reset.
Note: If your robot cannot connect to the app successfully, reset the Wi-Fi and add the
device again.
How to Use
Fast Mapping
After configuration the network for the first time, follow the instructions on the app to
quickly create a map. The robot will start mapping without cleaning. When the robot
returns to the base, the mapping process has been completed and the map will be
saved automatically.
Turn On/Of
Press and hold the button for 3 seconds tot urn on the robot. The power indicator
should be illuminated. Place the robot onto the base. The robot should turn on
automatically and begin charging. To turn off the robot, move the robot away from the
base and press and hold the button for 3 seconds.
Wi-Fi Indicator
•Blinking slowly: To be connected
•Blinking quickly: Connecting
•On: Connected

14
Start Cleaning
Press the button briefly to start cleaning after the robot is turned on. The robot will
accurately map out a route, methodically clean along the edges and walls, then finish by
cleaning each room in an S-shaped pattern to ensure a thorough job.
Pause/Sleep
When the robot is running, press any button to pause it. If the robot is paused for more
than 10 minutes, it automatically enters sleep mode. All indicators on the robot will turn
off. Press any button on the robot or use the app to wake up the robot.
Note:
•The robot will turn off automatically if left in Sleep Mode for more than 12 hours.
•If the robot is paused and placed onto the base, the current cleaning task will
end.
Do Not Disturb (DND) Mode
When the robot is set to the Do Not Disturb (DND) mode, the robot will be prevented
from resuming cleaning and the power indicator goes out. The DND mode is disabled by
default at the factory. You can use the app to enable the DND mode or modify the DND
period. The DND period is 22:00-8:00 by default.
Note:
•The scheduled cleaning task will be performed on time during the DND period.
•The robot will resume cleanup where it left off after the DND period expires.
Spot Cleaning
When the robot is on standby, press briefly the button to enable the spot cleaning
mode. In this mode, the robot cleans a square-shaped area of 1.5 x 1.5 meters around it
and returns to its starting point once the spot cleaning is completed.

15
Scheduled Cleaning
You can schedule cleaning time in the Dreamehome app. The robot will automatically
start cleaning at the designated time and then return to the base to recharge when the
cleaning is done.
Additional App Functions
Follow the instructions on the app interface to use more functions. The version of the
app might have been updated. Please follow the instructions based on the current app
version.
Use the Mopping Function
It is recommended that all floors are vacuumed at least three times before the first
mopping session to achieve a better cleaning effect.
1. Dampen the mop pad and wring out excess water. Install the mop pad as shown
in the diagram.
2. Fill the tank with water.
Note:
•Do not use detergent or disinfectant.
•Do not fil the water tank with hot water as this may cause the water tank to warp.
3. Alight the mopping module as indicated by the arrow, then slide it into the back
of the robot until it clicks into place. Press the button or use the Dreamhome
app to start cleaning.

16
Note:
•It is not recommended to use the mopping function on carpets.
•Use the app to adjust the water flow as required.
Routine Maintenance
Parts
To keep the robot in good condition, it is recommended to refer to the following table
for routine maintenance.
Part
Maintenance Frequency
Replacement Period
Mop pad
After each use
Every 3 to months
Main brush
Once every 2 weeks
Every 6 to 12 months
Dust bin filter
Every 3 to 6 months
Side brush
Auto-empty base’s
signalling area
Once every month
/
Charging contacts
Auto-empty vent
Universal wheel
Laser Distance Sensor
(LDS)
AI visual sensor
Cliff sensors
Water tank
Clean it as needed
/
Dust bin
Dust collection bag
/
8-10 weeks
Note: The replacement frequency will depend on your usage of the robot. If an
exception occurs due to special circumstances, the parts should be replaced.

17
Clean the Dust Bin and Filter
1. Open the robot cover and press the bin clip to remove the dust bin.
2. Open the bin cover and empty the bin as shown in the diagram.
3. Clean the auto-empty vent.
4. Remove the filter and tap its basket gently.
Note: Do not attempt to clean the filter with a brush, finger, or any sharp objects so as to
avoid damaging it.

18
5. Rinse the dust bin and filter with water and dry them completely before
reinstalling.
Note:
•Rinse the dust bin and filter with clean water only. Do not use any detergent.
•Use the dust bin and filter only when they are completely dry.
Clean the Mopping Module
1. Slide the two release clips on the side of water tank to remove the mopping
module, and then pull the mop pad off the mopping module.
2. Pour out the water in the tank. Clean with water only and leave to aid dry before
re-installing.
Note: Do not directly expose the water tank to sunlight.

19
3. Clean the mop pad with water only and leave it to air dry before re-installing.
Note:
•Remove the pad from the mopping module before cleaning it. Make sure dirty
water does not flow back into the water outlet to avoid clogging.
4. If the water flows too slowly or the outflow is not well-distributed, please clean
the air hole on the cover of the water tank.
Clean the Main Brush
1. Press the brush guard clips inwards to remove the brush guard and lift the brush
out of the robot.

20
2. Pull out the brush covers as shown in the diagram. Use the included cleaning tool
to remove any hairs tangled in the brush.
Note: Do not pull out the hair tangled in the main brush too vigorously. Doing so many
damage the brush.
Clean the Side Brush
Pull out the side brush and use the included cleaning tool to remove any hair tangled in
the brush.
Clean the Main Wheel / Universal Wheel
Note: Use a tool such as a small screwdriver to separate the axle and tire of the
universal wheel.