DREAMS Deacon bed User manual

215-00945 (Solid slats)
Deacon bed 215-00946(Sprungslats)
AssemblyInstructions
1.Wesuggest youspendashorttimereadingthroughthisleafletandthenfollow
the simplestep bystep instructions.
2.Ifyou followthe instructionscarefullytheend result shouldbe worththe effort.
3.Donot discardanyof the packaging until youhavecheckedthatyou
haveall the partsand the packoffittings.
4.Assemblethisproduct on acarpet.
5.Toensurean easierassembly, westronglyadvisethat all fittingsareonly
fingertightened during initialassembly. Onlyupon completion of the.
Assemblyshouldall fixing pointsbe fullytightened.
6.Werecommend aperiodiccheckon all fixing pointstomakesuretheyremain
fullytightened.
7.Keep glue and fittingsout of childrensreach.
Intheunlikelyeventthatthisproducthasmissing ordamaged parts,pleasecall
03442 920000toobtainspares
Beforeyou
Start, here
aresome
helpful
advices.
Revision number1/1

M6 35mmx14pcs
M3 35mmx1pc
M6nut x6pcs
M6 Washer x 6pcs
M4Allen key 2pcs
M5Allen key 1pc
Revision number 1/1
PARTS
Fittings
QTY
1
4
2
1
A
B
D
1
NO. PART LIST
(1) HEADBOARD
(2)
FOOTBOARD
(3)
WOODEN FEET
(4) SIDE RAILS
(5) SUPPORT LEG
C
E
F
5
12
3
2
2
2
4
4
Left
Left
Right
Right

ASSEMBLY
STEP 1
(1). Attach the Wooden Feet to the
headboard and footboard by using
bolt (C) and Allen Key(F) .
(2). Loosen the pre-assembled bolts
on the headboard and footboard
with the Allen Key(F)
Note: Leave 10 mm protruding as
in the diagram
Revision number 1/1
E
A
12
3
22
2
left
left
Right
Right

ASSEMBLY
STEP2
(1).Attachthesiderailstothe
headboardandfootboard.
Revision number1/1

ASSEMBLY
STEP3
MAKE CERTAINTHE BED IS
SQUARED UP.AS SHOWNON
THE RIGHT.
Onceallfour comers arelocated.
makesurethebed isstillsquare
asinthesketch.then tighten all
thebolts100%usingAllenkey
(E) (F).
Revision number1/1

s
ASSEMBLY
STEP4
NOTE:Slatsnotsuppliedshown
forreferenceonly.
Bothslatson "step3"and"step
4"can beassembled tothe
bedstead.Youcan makeachoice
betweenthetwoslats.
OPTION"A":DREAMSFIXED
WOODSLATS
（1） Carefullylocatetheslats
ontotheunit.Fixoneend
ofslats,
（2）Usebolt(A) ,Washer (D)
andJCN nut(C) tofixthe
unitusingAllen Key(E)
（3）UseTappingScrew(B) to
fixtheSupportleg
（4）Fixall otherslats.
（5）Byhandinsertadjustable
feet intoeachsupport leg
byturningclockwise.
Revision number1/1

ASSEMBLY
STEP5
OPTION"B":DREAMSSPRUNG
SLATS
1)Usethebolttofixsupportleg
ontotheslatframe.Pleasenote
thattheseboltsaretobefound
insidetheslat framebox.
2)Carefullylocatetheslatsonto
theunit.
3)Usebolt(A) ,Washer(D) and
JCN nut(C) tofixtheunitusing
Allen Key(E)
Revision number1/1