DREAMS Westbrook Bunk User manual

Westbrook Bunk
IMPORTANT, RETAIN FOR FUTURE REFERENCE:
READ CAREFULLY !
Two person
assembly
3/4 hour approx
assembly time

Thank you
Hello, thanks for choosing to purchase your bed from our company- you're now on your way to
creating a practical and stylish solution for your room. Before you begin building your bed,
please take a moment to read through the instructions and make sure that you've got all the
relevant parts listed on the following pages.
Assembly tips
Before you begin, it’s best to identify all parts and fittings to build your bed.
We advise laying these out on the floor to check you have everything, and
familiarising yourself before building.
We recommend that you build your new bed in the room you’d like it to
be located - this will help prevent any risk of damage to your newly built
sofa bed whilst moving it.
Top tip
Safety and care
It’s really important to ensure children and animals are kept away from the
assembly area, as there are small components used in this bed which could
present a choking hazard. All plastic and wrapping materials should also be
To keep your little ones busy, there is a colouring page inside the back cover.
Recycling
Please ensure that packaging is disposed of in a safe and environmentally
friendly way, and recycle where possible. Our assembly instructions are
printed on recycled paper. Please keep your assembly instructions safe
to refer back to in the future.
Westbrook Bunk - Assembly Guide - Page 2
Help and support
At Dreams, it’s our mission to give the whole nation a great night’s sleep - this
means that the quality of our products is of utmost importance to us. If there
are any issues with your product or any missing parts, please contact our Help
Centre on 0800 652 6750, where a member of our team will be happy to help.
(For customers based in Northern Ireland, please call 028 9050 8300)

Parts
1. Base Leg x 4 pcs □
2. Lower Head/Foot End x 2 pcs□
6. Lower Side Rail x 1 pc □
7. Lower Side Rail x 1 pc □
3. Upper Head/Foot End x 2 pcs □
4. Upper Side Rail x 1 pcs□
8. Protect Frame x 1 pc □
9. Ladder x 1 pc □
5. Upper Inside Frame x 1 pcs□10. Metal Slat x 48 pcs□
Parts list
Westbrook Bunk - Assembly Guide - Page 3
03
02
03
07
06
02
01
05
04
09
01
01
01
08
10
10

Bolt (M6 x 50mm) Bolt (M6 x 20mm) Bolt (M6 x 15mm) Allen Key
Fittings
Please check you have all the parts listed below with your product:
Westbrook Bunk - Assembly Guide - Page 4
Ax 14 B x 16 C x 5 D x 1
Slat Buckle
E x 46
Caps (Dia 17mm) Caps (Dia 10mm)
Fx 1 Gx 9
0 1 2 3 4 5 6 7 8 9 1010 11 12 13 14 15 16 17 18 19cm
Tools required
Please check you have all these below:
Scissors Tape measure

Assembly
HEAD/FOOT END ASSEMBLY
Attach Base Leg (01) to
Upper Head/Foot End (03).
x2
x2
1
Westbrook Bunk - Assembly Guide - Page 5
Assembly
HEAD/FOOT END ASSEMBLY
Attach Lower Head/Foot End (02)
to Base Leg (01).
Fully tighten all bolts.
2
03
01
01
A
02
A
AD
A
Make sure these tubes
on the same side.

Assembly
Westbrook Bunk - Assembly Guide - Page 6
Assembly
SIDE RAIL ASSEMBLY
Attach the Upper Side rail (04) to headend/Footend.
4
SIDE RAIL ASSEMBLY
Attach Lower Side Rails (06) (07) to headend/Footend.
Loosely tighten the Bolts 90%.
3
D
B
B
04
07
D
B
B
06
90%
Loosely tighten the Bolts 90%.
90%

Assembly
Westbrook Bunk - Assembly Guide - Page 7
Assembly
AD
05
B
B
D
SLAT SYSTEM ASSEMBLY
Insert metal slats and secure with plastic buckle to the side rails.
6
SIDE RAIL ASSEMBLY
Attach Upper Inside Frame (05) to headend/Footend.
5
10
Fully tighten all bolts
at this step.

Assembly
Westbrook Bunk - Assembly Guide - Page 8
Assembly
E
08
A
D
PROTECT FRAME AND LADDER ASSEMBLY
Before ASSEMBLY the Protect frame and ladder,
you must deciede which side you want to
fit the ladder to.
8 a
SLAT SYSTEM ASSEMBLY
Use Slat Buckle to connect Metal slats.
7
Option: 01
The ladder on the right side,
The protect frame on the left side
08
C
D

Assembly
Westbrook Bunk - Assembly Guide - Page 9
Assembly
09
CD
AD
PROTECT FRAME AND LADDER ASSEMBLY
Press and attach the Metal slats with plastic buckles
into the side rails
9a
PROTECT FRAME AND LADDER ASSEMBLY
ASSEMBLY
8 b
Option: 02
The ladder on the left side,
The protect frame on the right side
Option: 01
The ladder on the right side,
The protect frame on the left side
08 C
C
D
08

Assembly
Westbrook Bunk - Assembly Guide - Page 10
Assembly
D
09
C
F
G
BED FRAME ASSEMBLY
Insert Cap into hole.
10
PROTECT FRAME AND LADDER ASSEMBLY
9 b
Option: 02
The ladder on the left side,
The protect frame on the right side
C