DREAMS Mount Sleepmotion User manual

Two person
assembly
1.5 hour approx
assembly time
MK1 220329
MOUNT LIFESTYLE
BEDSTEAD SLEEPMOTION

Mount Sleepmotion Lifestyle Bed - Assembly guide - Page 2
Thank you
Hello, thanks for choosing to purchase your bed from Dreams - you're now on your way to your best
ever night's sleep. Before you begin building your bed, please take a moment to read through the
instructions and make sure that you've got all the relevant parts listed on the following pages.
Assembly tips
Before you begin, it’s best to identify all parts and fittings to build your bed.
We advise laying these out on the floor to check you have everything, and
familiarising yourself before building.
Help and support
At Dreams, it’s our mission to give the whole nation a great night’s sleep - this
means that the quality of our products is of utmost importance to us. If there
are any issues with your product or any missing parts, please contact our Help
Centre on 0800 652 6750, where a member of our team will be happy to help.
(For customers based in Northern Ireland, please call 028 9050 8300)
Safety and care
It’s really important to ensure children and animals are kept away from the
assembly area, as there are small components used in this bed which could
present a choking hazard. All plastic and wrapping materials should also be
To keep your little ones busy, there is a colouring page inside the back cover.
Recycling
Please ensure that packaging is disposed of in a safe and environmentally
friendly way, and recycle where possible. Our assembly instructions are
printed on recycled paper. Please keep your assembly instructions safe
to refer back to in the future.
We recommend that you build your new bed in the room you’d like it to be
located - this will help prevent any risk of damage to your newly built bed
whilst moving it.
Top tip

Mount Sleepmotion Lifestyle Bed - Assembly guide - Page 3
Parts
The bed you have purchased comes with a Sleepmotion Lifestyle electric base.
Complete the assembly of the Sleepmotion base before assembly of the bed frame. Assembly Instructions are
included within the Sleepmotion base carton.
Once the base is assembled in the final location, follow the steps below to build your bed frame around it.
Please follow the relevant instructions in each of the steps.
Parts list
The dotted lined parts shown above
are packed in the sleepmotion bed
base carton itself.
A
C
C
B
A. Headboard 1
B. Footboard 1
C. Side rails 2
Tools required
Please check you have all these below
Tape measure
817161514131211101019876543210cm
Fittings
Please check you have all the parts listed below with your product:
Hardware pack is packed in Sleepmotion side rail Pack 2L
This hardware is needed for fitting side rails to headboard & footboard.
Spring washer for M8 bolts
Bolts (M8x30mm) for fitting
side rails to headboard &
footboard
a x16 b x16
Flat Washer for M8 bolts
c x16
Allen Key for M8 bolt
d x1

Before starting assembly please refer to the owners
manual supplied with your sleepmotion 200i bed base
and follow the instructions taking note of any safety
precautions or operational safety requirements of the
installation.
In the room where bed will be used, first prepare the bed base by fitting the eight long
legs - 6‘’ (15cm), see Step 2.
Connect the power and check the operation then step by step follow the bed assembly
instructions below, to build the bedstead around the sleepmotion 200i bed base.
Important:
Mount Sleepmotion Lifestyle Bed - Assembly guide - Page 4
ad
b
c
10mm
a x8 bx8 cx8 dx1
1
Bed assembly
Prepare the headboard & footboard using hardware shown.
A
B

Mount Sleepmotion Lifestyle Bed - Assembly guide - Page 5
3
ax2bx2cx2
dx1
A
C
a
b
cd
90%
10mm
20mm
Firstly screw in the eight 6" (15cm) legs as shown.
Positioning the bed base. .
Place the headboard in the position in which it shall be used and attach the right hand side
rail using the hardware packed in side rail pack 2L. Make sure the bed base is installed the
correct way round with mattress stopper at the foot end. Carefully lift and place bed base
into the corner between headboard and side rail as shown - it is heavy so please get help.
Assemble the bed frame around the bed base.
2

Mount Sleepmotion Lifestyle Bed - Assembly guide - Page 6
4
5a
b
x2
cx2
dx1
B
90%
d
a
b
c
Connect footboard to the RH side rail brackets.
i Connect Power Lead for electric base to your wall socket - for safety this must be an
earthed power supply. Lead the plug out under the headboard.
ii. Raise the head and foot ends of the electric bed base using the remote control.
x2

C
Mount Sleepmotion Lifestyle Bed - Assembly guide - Page 7
6
abc
d
90%
100%
a x4
cx4
dx1
Make sure everything is working properly then fit the LH side rail.
7
10mm
30mm
10mm
20mm
bx4

Care and maintenance
Here are some tips to keep your new bed in tip-top condition
Mount Sleepmotion Lifestyle Bed - Care and maintenance guide - Page 8
Cleaning
To clean your new bed, we'd advise using a warm damp cloth or if fabric, remove
dust using a low suction vacuum cleaner.
Please do not use abrasive chemicals or bleach as this may damage the product.
Checking and moving
Periodically we recommend you check that the screws or fixtures haven't become
loose over time. To move your new bed, we recommend lifting it where possible, as
dragging or pushing it could cause damage to the legs or flooring.
Wood
Please note each of our wooden pieces are unique, meaning that markings and
shade can vary slightly between beds. Over a period of time, the wood might
lighten or fade slightly due to light exposure.
Fabric
Please note depending on the lighting, positioning and surroundings of your
period of time, the colour might lighten or fade slightly due to light exposure.
Metal
Metal tends to be more resilient to everyday wear and tear. We recommend to
gently dust your metal furniture and keep it dry to maintain its look.
Thank you for shopping with us - we hope you have a
great night's sleep.
King:
Double:
2040 x 1530
Overall Dimensions (LWH mm)
Double: 2110 x 1490 x 1160
King: 2210 x 1640 x 1160
Internal Dimensions (LW mm)
1940 x 1380
12.5
W
H
L
4
5.5
37
1.5 34.2
Floor to top
of slat
2.8
Top of side rail
to top of slat

Little dreamers
Keep the little ones entertained while
you assemble your new purchase.