DREAMS Isabella Double User manual

Isabella Double & King Bed
OTTOMAN
Important - read this guide carefully and retain for future reference.
Ottoman Safety Warnings
You must ensure that the mattress is on the bed frame before operating the lift mechanism - Failure
to do so could result in injury.
Keep hands clear of the mechanism when opening or closing the ottoman.
eware of entrapment - Never reach in through the mechanism to access the storage area.
Always ensure that the ottoman is FULLY opened before accessing the storage area.
ed ed Size Min Mattress
Weight (kg)
Max Mattress
Weight (kg)
Isabella
(manual)
Double
King
20
24
42
50
Piston Strength (N/M)
600
700
Do not exceed the maximum mattress weight as specified in the table below:
Isabella Double & King bed - Assembly Guide - page 1

Thank you
Hello, thanks fo choosing to pu chase you bed f om D eams - you’ e now on you way to you best
Eve night’s sleep. Befo e you begin building you bed, please take a moment to ead th ough the
Inst uctions and make su e that you’ve got all the elevant pa ts listed on the following pages.
Top tip
We ecommend that you build you new bed in the oom you’d like it to be
Located - this will help p event any isk of damage to you newly built bed
Whilst moving it .
Befo e you begin, it’s best to identify all pa ts and fittings to build you bed.
We advise laying these out on the floo to check you have eve ything, and
familia ising you self befo e building.
Safety and ca e
It's eally impo tant to ensu e child en and animals a e kept away f om the
assembly a ea, as the e a e small components used in this bed which could
p esent a choking haza d, All plastic and w apping mate ials should also be
kept away f om child en and animals to p event any isk of suffocation.
To keep you little ones busy, the e is a colou ing page inside the back cove .
Help and suppo t
At D eams, it's ou mission to give the whole nation a g eat night's sleep - this
means that the quality of ou p oducts is of utmost impo tance to us. If the e
a e any issues with you p oduct o any missing pa ts, please visit ou website
at www.d eams.co.uk /help
Recycling
Please ensu e that packaging is disposed of in a safe and envi onmentally
f iendly way, and ecycle whe e. Please keep you assembly inst uctions
safe to efe back to in the futu e.
Isabella Double & King bed - Assembly Guide - page 2

Parts
The bed you have purchased comes with a metal slat frame lifting from the front
OTTOMAN
Parts List
Ref Description Qty
A. Headboard 1
. Footboard 1
C. Headboard Panel 1
D. Footboard Panel 1
E. Side Rails (Left & Right) 2
Ret Description Qty
F. Center Panel 1
G. ase oards 2
H. ase oards 2
I. Metal Slat Frame 1
J. Mattress Stoppers 2
E R
I
J
J
A
C
B
D
F
E L H
G
HG
Isabella Double & King bed - Assembly Guide - page 3

Fittings
Please check you have all the parts listed below with your product:
(a) olt (M8x80)
x4pcs
(b) Ø8 Washer
x4pcs
(c) arrel ut (M8)
x4pcs
(d) Locking Nut
x16pcs
(e) Locking Pin
x16 pcs
(f) Dowel (Ø10x40)
x4pcs
(g) Dowel (Ø8x30)
x12pcs
(h) Jcn Nut (1
4")
x4pcs
(i) olt (1
4" x3 4")
x4pcs
(j) olt (M8x20)
x10pcs
Tools required
Please check you have all these below:
Scissors Tape measure
(k) Spanner
x1pc
(l) Allen Key(M4)
x2pcs
(m) Allen Key(M5)
x1pc
(n) Nut (M8)
x2pcs
Isabella Double & King bed - Assembly Guide - page 4

1
2
C
E L
E R
F
e
g
d
g
D
1) Fit Dowels (g) into holes in the ends of side rails (E)
and center rail (F). Screw Locking Pins (e) into the
headboard panel (C).Use Locking Nuts (d) to fix the
headboard panel onto side rails (E) and center panel (F).
2) Please do not tighten any Locking Nuts yet.
Assemble footboard panel (D) to the side&center rails (E& F).
Secure by tightening the locking nuts in the same way as described in step 1.
Ottoman assembly
g
g
e
d
d
e
Isabella Double & King bed - Assembly Guide - page 5

4
m
a
Fit the headboard (A) to the unit.
Ottoman assembly
3
B
Fit the footboard ( ) to the unit.
b
f
c
e
f
d
A
Isabella Double & King bed - Assembly Guide - page 6

I
i
Fit the Mattress Stoppers (J) to the slat frame (I).
5
J
Ottoman assembly
6
Slide gas - lift piston stem onto the
axle then fit the Nuts (n).Tighten
Nuts with Spanner (k),do not
over - tighten.
A small gap needs to be left so
stem can move freely, please see
sketch below.
l
l
n
small gap
k
h
h
Slat frame Support ar
Isabella Double & King bed - Assembly Guide - page 7

7
j
1) Two people carefully lower the slat
frame onto the gas-lift mechanisms
support bars
2) Secure by threading bolts (j) to
slat frame on the gas-lift
mechanisms support bars .
8
Position base boards (G&H) into the bed frame
I
I
Ottoman assembly
m
G
H
H
G
Isabella Double & King bed - Assembly Guide - page 8

Make certain the bed is squared up
as shown in the diagram then tighten all
bed assembly bolts 100%
9
Ottoman assembly
LAY DOWN
Isabella Double & King bed - Assembly Guide - page 9

Warning
You must ensure that the mattress is on the bed frame before operating the lift mechanism - Failure
to do so could result in injury.
Keep hands clear of the mechanism when opening or closing the ottoman.
eware of entrapment - Never reach in through the mechanism to access the storage area.
Always ensure that the ottoman is FULLY opened before accessing the storage area.
Do not exceed the maximum mattress weight as specified in the table below:
Use caution when operating, always use the handle when lifting.
Note:This bed uses a pressurised mechanism.
To be operated by adults only
Please ensure that children and pets are kept away from the bed when operating the lift mechanism.
Keep children and pets away from the storage area.
Do not overload the internal storage base.
Do not stand inside the internal storage area of the bed.
efore removing the mattress secure the frame to ensure it does not open unexpectedly.
Do not attempt to lie on the mattress when the ottoman is in the raised position.
When lifting the ottoman remove all bedding except the fitted sheet.
ed ed Size Min Mattress
Weight (kg)
Max Mattress
Weight (kg)
Isabella
(manual)
Double
King
20
24
42
50
Piston Strength (N/M)
600
700
Isabella Double & King bed - Assembly Guide - page 10

Ca e and maintenance
He e a e some tips to keep you new bed in tip - top condition
Cleaning
To clean you new bed, we’d advise using a wa m damp cloth - please do not
use ab asive chemicals o bleach as this may damage the p oduct.
Checking and moving
Pe iodically we ecommend you check that the sc ews o fixtu es haven’t been
Become loose, ove time. To move you new bed, we ecommend lifting it whe e
Possible, as d agging o pushing it could cause damage to you floo ing.
Wood
Please note each of ou wooden pieces a e unique, meaning that ma kings and
shade can va y slightly between beds. Ove a pe iod of time, the wood might
Lighten o fade slightly due to light exposu e.
Fab ic
Please note depending on the lighting, positioning and su oundings of you
Room, the shade o the colou can sometimes appea slightly diffe ent. Ove a
pe iod of time, the colou might lighten o fade slightly due to light exposu e.
Metal
Metal tends to be mo e esilient to eve yday wea and tea . We ecommend to
gently dust you metal fu nitu e and keep it d y to maintain its look.
Thank you fo shopping with us - we hope you
have a g eat night’s sleep
Isabella Double & King bed - Assembly Guide - page 11