Drive OT 1000 SF User manual

two year limited
warranty
Your Drive brand product is warranted to be free
of defects in materials and workmanship for two years
from the date of the original consumer purchase.
This device was built to exacting standards and
carefully inspected prior to shipment. This Two
Year Limited Warranty is an expression of our
confidence in the materials and workmanship of
our products and our assurance to the consumer of
dependable service.
In the event of a defect covered by this warranty,
we will, at our option, repair or replace the device.
This warranty does not cover device failure due to
owner misuse or negligence, or normal wear and
tear. The warranty does not extend to non-durable
components such as rubber accessories, casters, and
grips, which are subject to normal wear and need
periodic replacement.
If you have a question about your Drive device
or this warranty, please contact an authorized
Drive dealer.
© 2006 Medical Depot, Inc. All rights reserved.
Drive is a trademark of Medical Depot, Inc.
Port Washington N.Y. 11050 USA Made in China
otter bath chair
with soft fabric
item# OT 1000 SF, OT 2000 SF,
& OT 3000 SF

recommended use
The Otter Bath Chair provides support during
bathing in the bathtub. The seat, back and legs are
fully adjustable. All adjustments are tool-free.
assembly
Your Otter Bath Chair comes in one carton
completely assembled.
This carton contains: Bath chair, head cushion
strap, positioning and leg straps.
If your shipment is incomplete, please call a Drive
authorized dealer.
Optional Accessories:
Tub Stand: Item # OT 8010
Shower Stand: Item # OT 8020
maintenance and care
1. Inspect the chair periodically for cracks,
breaks, loose or missing parts or malfunctions.
Check the fabric for tears or worn areas. If
a product needs service or replacement parts,
contact an authorized Drive dealer.
2. Wash chair and fabric with soap and water
or 10% bleach. Do not use pine oil cleaners.
Fabric and straps may be removed and
machine-washed. Engage hook and loop
before washing. Fabric cover may be washed
on cool setting and drip-dried. Straps may be
washed in warm water and dried on cool
setting. Do not iron.
caution
- Adult supervision is required at all times.
- The straps and supports must be carefully
adjusted for the comfort and security of the child.
- Child must be strapped in at all times.
1. Head cushion strap height can be adjusted by
opening strap in the back and positioning it at
desired height. Securely engage hook and loop
of strap.
2. Slide head cushions (A) along the strap to
adjust width.
3. Chest strap height can be adjusted by opening
outer strap in the back and positioning it at
desired height. Securely engage hook and loop
of strap. The inner strap wraps around the
user’s check. Secure by attaching it with the
hook and loop fasteners.
4. Individual leg straps can be wrapped around
each leg and secured or wrapped underneath
the seat for additional abduction.
5. To adjust legs (C), pull crossbar (D) outward,
rotate legs & push in to engage.
6. To adjust seat angle, pull on Uni-Bar (E) under
the seat, adjust seat to desired position and
release Uni-Bar. To adjust back angle use
Uni-Bar behind the Otter back.
adjustments
A
B
C
D
E