Drive OT 1000 Installation instructions manual

Instructions & Warranty
Item #’s
OT 1000, OT 2000, OT 3000
www.drivemedical.com
Otter Bath Chair
Your Drive brand product is warranted to be free
of defects in materials and workmanship for two
years from the date of original purchase.
This device was built to exacting standards and
carefully inspected prior to shipment. This Two
Year Limited Warranty is an expression of our
confidence in the materials and workmanship of
our products.
In the event of a defect covered by this warranty,
we will, at our option, repair or replace the device.
This warranty does not cover device failure due to
owner misuse or negligence, or normal wear and
tear. The warranty does not extend to non-durable
components which are subject to normal wear
and need periodic replacement.
If you have a question about your Drive device or
this warranty, please contact an authorized Drive
dealer.
PORT WASHINGTON, NY 11050
TWO YEAR LIMITED
WARRANTY
© 2002 Medical Depot, Inc. All rights reserved.
Drive is a trademark of Medical Depot, Inc.
Port Washington N.Y. 11050 USA Made in China

Recommended Use:
The Otter Bath Chair provides support during
bathing in the bathtub. The seat, back and
legs are fully adjustable. All adjustments are
tool-free.
Adjustments: (SEE FIGURE 1)
1.
Angle of seat is adjusted using both triggers
(B). Pull triggers, rotate seat to desired position,
and release trigger. Angle of back is adjusted
using both triggers (C).
2. Head cushion strap height can be adjusted by
opening strap in the back and positioning it at
desired height. Securely engage hook and loop
of strap once positioned. Slide head cushions
(A) along the strap to adjust width.
3.
Straps (D) can be adjusted as needed by
inserting in any of the loops along the entire unit.
4.
To adjust legs (E), pull crossbar (F) outward,
rotate legs & push in to engage.
Assembly:
Your Otter Bath Chair comes in one carton
completely assembled. This carton contains:
Bath chair, head cushion strap, 2 positioning
straps and a set of leg straps.
If your shipment is incomplete, please call a
Drive authorized dealer.
Optional Accessory: Tub Stand,
Item # OT 8010
Maintenance And Care:
1. Inspect the chair periodically for cracks,
breaks, loose or missing parts or
malfunctions. Check the fabric for tears or
worn areas. If a product needs service or
replacement parts, contact an authorized
Drive dealer.
2. Wash chair and fabric with soap and
water or 10% bleach. Do not use pine
oil cleaners. Fabric and straps may be
removed and machine-washed. Engage
hook and loop before washing. Fabric cover
may be washed on cool setting and drip-
dried. Straps may be washed in warm water
and dried on cool setting. Do not iron.
A
D
C
FIGURE 1
E
F
F
B
B
Caution:
Adult supervision is required at all times.
The straps and supports must be carefully
adjusted for the comfort and security of the child.
Child must be strapped in at all times.