DURAVIT Cape Cod 700330 90 Series User manual

Installation instructions Freestanding bathtub
Notice de montage Baignoire autoportante
Instrucciones de montaje y uso Bañera de pie
Cape Cod
# ...
DuraSquare
# ...
Luv
# ...
Vero Air
# ...

257222_MAL_Bathtub freestanding_US/18.11.1

57222_MAL_Bathtub freestanding_US/18.11.1 3
es fr
Información importante 16
Montaje 17
Remarques importantes 10
Montage 11
Important information 4
Installation 5
en

Prior to the installation
Please read the specifications sheets prior to the installation.
Specification sheets are available for download at
pro.duravit.us.
Products are in compliance with the following codes:
• Uniform Plumbing Code (UPC®)
• National Plumbing Code of Canada
25
26
About these instructions
The installation instructions come as part of the Duravit
product and must be read carefully prior to installation.
Target readership and qualifications
This is a professional grade product. A working knowledge
of construction techniques and code compliant plumbing
installation are required for proper installation and user
satisfaction. We recommend the product be installed by a
licensed plumber.
Explanation of the key words and symbols
NOTICE Is used to address
practices not related to
physical injury.
Inspection (e.g. for scratches)
Inspect for leaks and that all connections have a
watertight seal
Indication of the length of time (e.g. 10 minutes)
>Action required
Safety instructions
Product and/or property damage
The breach of local and country-specific regulations and
standards can cause damage to the product and/or property
damage.
> Observe the local installation regulations and any
country-specific standards at all times.
457222_MAL_Bathtub freestanding_US/18.11.1
en

57222_MAL_Bathtub freestanding_US/18.11.1 5
en
# ...
# ...
# ...
Delivery contents
# ...

657222_MAL_Bathtub freestanding_US/18.11.1
en
# 791281 (PVC)
# 791282 (ABS)
+Optional accesories (not included)
Freestanding in-floor bathtub drain

⅛"
2 mm
NOTICE
Tilting the bathtub on its side can
damage the bathtub.
> Place cardboard/blanket on
the floor.
> Turn bathtub over.
> Inspect bathtub for any potential
damage that may have occured
during transport.
> Do not install if any damage ist
visable.
> Connect tailpiece to the bathtub
drain.
> Make sure all fittings are
watertight.
For Vero Air:
> Connect waste and overflow.
> Level the feet before setting
the bathtub.
> Ensure floor area is clear and level.
> Compensate irregularities by
adjusting tub feet.
57222_MAL_Bathtub freestanding_US/18.11.1 7
en
789
654
321

32 ¼”
820 mm
11 ¼” 284 mm
17 ⅜”
440 mm
28 ⅜”
720 mm
38 ⅜”
975 mm
34 ½
875 mm
12 ¼”
310 mm
33 ½”/850 mm
16 ¾” 425 mm
36 ⅜”
925 mm
36 ⅜”
925 mm
72 ⅞”
1850 mm
31 ½”
800 mm
31 ½”
800 mm
4 ⅞”
125 mm
4 ⅞”
125 mm
4 ½”
115 mm
35 ⅜”
900 mm
70 ⅞”
1800 mm
35 ⅜”
900 mm
29 ⅛”
740 mm
29 ⅛”
740 mm
16 ¾”
425 mm
10 ¼” 260 mm
31 ½”/800 mm
15 ¾” 400 mm
15 ¾”
400 mm
35 ⅜”
900 mm
35 ⅜”
900 mm
70 ⅞”
1800 mm
> Observe the dimensions from
diagram 8 to 11 for the positioning
of the drain.
> Position the installation aids
accordingly.
Measurements for Luv.
Measurements for DuraSquare.Measurements for Cape Cod.
Measurements for Vero Air. > Attach straps.
> Position bathtub.
857222_MAL_Bathtub freestanding_US/18.11.1
en
121110
987

150 mm
5 ⅞”
> Fill the bathtub with water.
> Inspect for potential leaks.
> Make sure to water test fittings.
> Remove installation aids.> Connect bathtub to drain system. > Slide straps under the bathtub.
> Let it sit for 24 h before draining.
NOTICE
Silicone with acetic acid can damage
the bathtub.
> Use alkoxy based silicone.
> Apply silicone around the base of
the tub.
57222_MAL_Bathtub freestanding_US/18.11.1 9
en
181716
151413

Avant l’installation
Veuillez lire les fiches de spécifications avant l’installation.
Les fiches de spécifications peuvent être téléchargées sur
pro.duravit.us.
Les produits sont conformes aux codes suivants:
• Uniform Plumbing Code (UPC®)
• Code national de la plomberie du Canada
25
26
À propos de ces instructions
Ces instructions d’installation font partie du produit Duravit et
doivent être lues soigneusement avant l’installation.
Lectorat ciblé et compétences
Il s’agit ici d’un produit de niveau professionnel. Des
connaissances pratiques des techniques de construction et des
installations de plomberie conformes au code sont requises pour
assurer une installation correcte et la satisfaction du client. Nous
recommandons de faire réaliser l’installation du produit par un
plombier autorisé.
Explication des mots-clés et des symboles
ATTENTION S'utilise pour répondre à
des pratiques qui ne sont
pas reliées aux blessures
physiques.
Inspection (par ex. des rayures)
Vérifiez la présence de fuites et si toutes les connexions
sont étanches à l’eau
Indication de la durée (par ex. 10 minutes)
> Action requise
Instructions sur la sécurité
Endommagement d'un produit et/ou d'une propriété
Le non-respect des règlements locaux ou spécifiques à un pays
peut entraîner des dommages sur le produit et/ou des dommages
matériels.
> Observez les règlements d'installation locaux et les normes
nationales particulières en tout temps.
10 57222_MAL_Bathtub freestanding_US/18.11.1
fr