DUSK Ascot User manual

Important
Assembly Tip
Before you begin, it's best to identify all of the parts and fittings to build your bed frame.
We advise laying these out on the floor to check you have everything, and to familiarise
yourself with all of the parts and fittings before building.
Top Tip
We recommend that you build your new bed frame in the room you'd like it to be located.
This will help prevent any risk of damage to the frame whilst moving it.
Safety and Care
It's important to ensure children and animals are kept away from the assembly area, as
there are small components used in this bed frame which could present a choking
hazard. All plastic and wrapping materials should also be kept away from children and
animals to prevent any risk of suffocation.
Help and Support
Please contact our customer service team on 0113 519 0311 if you have any questions or
issues with your purchase.
Recycling
Please ensure that packaging is disposed of in a safe and environmentally friendly way,
and recycle where possible. Please keep your assembly instructions safe to refer back to
in the future.
Page 2

Step 1: Screwing the Legs to the Headboard & Footboard
2
1
4
4
4

Step 2: Attaching the Side Rails to the Headboard and Footboard
NB: Before tightening the bolts, please ensure the bed frame is square
Page 5

Step 3: Attaching the Horizontal Support Rail to the Side Rails

Step 4: Attaching the Central Support Legs to the Central Support Rail
6pcs
6pcs
Page 6

Step 5: Attaching the Central Support Rail to the Headboard & Footboard
4pcs

Step 6: Attaching the Slat Caps & Slats to the Bed Frame
Centre Slat Caps Double/King 13/15 pcs
Side Slat Caps Double/King 26/30 pcs
It is recommended to slot the Side Slat Caps into
position before pushing down on the Centre Slat
Caps. Push down firmly on the Centre Slat Caps into
the predrilled holes on the Central Support Rail.
9
8

8
M
good
w
fram
e
.
frame
the
or
abrasive
M
,
frame,
,
fabric will ap
differently
fabric
ay also
exposure.

Important
Assembly Tip
Before you begin, it's best to identify all of the parts and fittings to build your bed frame.
We advise laying these out on the floor to check you have everything, and to familiarise
yourself with all of the parts and fittings before building.
Top Tip
We recommend that you build your new bed frame in the room you'd like it to be located.
This will help prevent any risk of damage to the frame whilst moving it.
Safety and Care
It's important to ensure children and animals are kept away from the assembly area, as
there are small components used in this bed frame which could present a choking
hazard. All plastic and wrapping materials should also be kept away from children and
animals to prevent any risk of suffocation.
Help and Support
Please contact our customer service team on 0113 519 0311 if you have any questions or
issues with your purchase.
Recycling
Please ensure that packaging is disposed of in a safe and environmentally friendly way,
and recycle where possible. Please keep your assembly instructions safe to refer back to
in the future.
Page 2

Step 1: Screwing the Legs to the Headboard & Footboard
2
1
4
4
4

Step 2: Attaching the Side Rails to the Headboard and Footboard
NB: Before tightening the bolts, please ensure the bed frame is square
Page 5