DUSK Lottie User manual

Range Name: Lottie
Box Dimensions: L169 x W100 x H17(cm)
Lottie Dining Table
P-1 / 6
V1.0
Up to 45 minutes
assembly time
Two persons
assembly
This product is intended for domestic use only, not for commercial purpose.

IMPORTANT
ASSEMBLY TIP
TOP TIP
SAFETY AND CARE
al
ren
HELP AND SUPPORT
RECYCLING
CARE AND MAINTENANCE
P-2 / 6
table

1
2
4
3
P-3 / 4
Please check you have all the fittings listed below with your product.
ABCD
M8 Flat washer 16pcs
(1 extra, 4 pre-attached)
M8 Spring washer 16pcs
(1 extra, 4 pre-attached)
M8x25mm bolt 28pcs
(1 extra, 4 pre-attached)
Allen Key 1pc
1Table Top & Support 1 pc
3Table Wide Leg 1pc
2Table Wide Leg 1pc
Before you start to build your Lottie dining table, please take a moment to read through the instructions and make
sure that you have all the relevant parts listed on the parts checklist.
4Table Narrow Leg 2pcs
Fittings list
Parts list
4

ABC
D
A3 pcs
B3 pcs
C3 pcs
D1 pc
2
4
4
3
A
B
C
D
A3 pcs
B3 pcs
C3 pcs
D1 pcs
P-4 / 6
Step 1: Attaching the narrow leg to the No.2wide leg.
Step 2: Attaching the narrow leg to the No.3wide leg.

C
D
D1 pcs
P-5 / 6
Step 3: Disassemble the support from the table top.
Please keep the bolts and washers to be used
Step 4: Flip over the support onto
the legs and attaching the
support to the legs.
C12 pcs
D1 pcs
1
in step 5.

C
D
A
B
A9 pcs
B9 pcs
C9 pcs
D1 pc
P-6 / 6
Step 5: Attaching the legs and support to the table top.