DUSK Ascot User manual

Two person
assembly
Page 1
Up to 2 hours
assembly time
Double/Kin
Ascot Bed Frame
g
V1.0
DUSK

Important
Assembly Tip
Before you begin, it's best to identify all of the parts and fittings to build your bed frame.
We advise laying these out on the floor to check you have everything, and to familiarise
yourself with all of the parts and fittings before building.
Top Tip
We recommend that you build your new bed frame in the room you'd like it to be located.
This will help prevent any risk of damage to the frame whilst moving it.
Safety and Care
It's important to ensure children and animals are kept away from the assembly area, as
there are small components used in this bed frame which could present a choking
hazard. All plastic and wrapping materials should also be kept away from children and
animals to prevent any risk of suffocation.
Help and Support
Please contact our customer service team on 0113 519 0311 if you have any questions
or issues with your purchase.
Recycling
Please ensure that packaging is disposed of in a safe and environmentally friendly way,
and recycle where possible. Please keep your assembly instructions safe to refer back to
in the future.
Page 2

Page 3
Parts
Before you begin building your bed frame, please take a moment to read through the instructions
and make sure that you have all the relevant parts listed on the parts check list.
7
8
9
1
2
4
10
5
3
3
6
66
4
4
4

Parts Check List
No.Qty
1
2
3
4
5
6
7
8
ABCDE
Fittings
Please check you have all the fittings listed below with your product.
Page 4
1pc
1pc
2pcs
4pcs
1pc
No.Qty
Parts List
Parts List
9
10
M8 40mm Bolt 8pcs M6 15mm Bolt 6pcs
FG
M6 'T' NUT 15mm 6pcs Spring Washer 8pcs Flat Washer 8pcs
M5 Allen Key 1pc M4 Allen Key 2pcs
Headboard
Footboard
Side Rail
3pcs
Horizontal Support Rail
13/15pcs
1pc
NB: there are additional spare Fittings included within the Fitting pack
Leg
Central Support Rail
Slat Double/King
Side Cap Double/King
Centre Slat Cap Double/King
26/30pcs
26/30pcs
Central Support Leg
H
M6 25mm Bolt 8pcs

Step 1:
Step 2:
Page 5
Screwing the Legs to the Headboard & Footboard
2
1
4
4
4
Attaching the Side Rails to the Headboard and Footboard
A
G1pc
8pcs
E8pcs
D8pcs
WRONG CORRECT
NB: Before tightening the bolts, please ensure the bed frame is square
3
3
1
2
D
D
E
G
NB: The Angle Brackets
are pre-attached.
A
E D A G

Page 6
Step 4:
Step 3:
F
F
H
1
10
2
3
3
Attaching the Horizontal Support Rail to the Side Rails
F4pcs
H1pc
B
5
B
B
B
C6pcs
6pcs
6
6
6
CCC
CCC
H2pcs
Attaching the Central Support Legs to the Central Support Rail
H
CC
CC
H
H

Step 5:
Page 7
F
H1pc
4pcs
5
1
10
2
3
3
F H
F H
Attaching the Central Support Rail to the Headboard & Footboard
9
8
7
7
Step 6:
8
9
Side Slat Caps Double/King 26/30 pcs
Centre Slat Caps Double/King 13/15 pcs
It is recommended to slot the Side Slat Caps into
position before pushing down on the Centre Slat Caps.
Push down firmly on the Centre Slat Caps into the pre-
drilled holes on the Central Support Rail.
7
8
9
5
7
7
8
Attaching the Slat Caps & Slats to the Bed Frame

Page 8
CareandMaintenance
Here are some good tips to keep your new bed frame in tip-top condition.
Cleaning
To clean your new bed frame, we advise using a damp cloth if the fabric is dusty or a low
suction vacuum. Do not use abrasive chemicals or bleach as this may damage the product.
CheckingandMoving
Periodically, we recommend you check that the screws and fixtures haven't become loose
over time. To move your bed frame, we recommend lifting it where possible, as dragging or
pushing it could cause damage to the legs or flooring.
Fabric
Please note, depending on the Iighting, positioning and surroundings of your room, the
shade of the fabric will appear differently. Over a period of time, the fabric may also lighten
or fade slightly due to light exposure.

Two person
assembly
Page 1
Up to 2 hours
assembly time
Super Kin
Ascot Bed Frame
g
V1.0
DUSK

Important
Assembly Tip
Before you begin, it's best to identify all of the parts and fittings to build your bed frame.
We advise laying these out on the floor to check you have everything, and to familiarise
yourself with all of the parts and fittings before building.
Top Tip
We recommend that you build your new bed frame in the room you'd like it to be located.
This will help prevent any risk of damage to the frame whilst moving it.
Safety and Care
It's important to ensure children and animals are kept away from the assembly area, as
there are small components used in this bed frame which could present a choking
hazard. All plastic and wrapping materials should also be kept away from children and
animals to prevent any risk of suffocation.
Help and Support
Please contact our customer service team on 0113 519 0311 if you have any questions
or issues with your purchase.
Recycling
Please ensure that packaging is disposed of in a safe and environmentally friendly way,
and recycle where possible. Please keep your assembly instructions safe to refer back to
in the future.
Page 2