DXV Keefe D35104430 User manual

- 1 -
INSTALLATION INSTRUCTIONS
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2018
SAVE FOR FUTURE USE
RECOMMENDED TOOLS AND MATERIALS
Most of the procedures require the use of common tools and materials, which are available from hardware and plumbing
supply stores. It is essential that the tools and materials be on hand before work is begun.
M965518 Rev. 1.4 (4/18)
Model D35104430
To be used with
D35000420.191 - 3/2 Two Way In-Wall Diverter
D35000430.191 - 4/3 Three Way In-Wall Diverter
Keefe®Handle Trim Kit for
2 Way or 3 Way In-Wall Diverter
ROUGHING-IN DIMENSIONS:
• For reference
Plumbers' Putty or Caulking
Phillips ScrewdriverFlat Blade Screwdriver
FINISHED
WALL
2-3/8"
(59.3 mm)
3/8"
(9.8 mm)
2-15/16"
(75 mm)
2-3/4"
(69.8 mm)
In the United States:
DXV
One Centennial Avenue
Piscataway, New Jersey 08855
Attention: Director of Customer Care
For residents of the United States, warranty
information may also be obtained by calling
the following toll free number: [phone]
www.DXV.com
In Canada:
DXV
5900 Avebury Road
Mississauga, Ontario
L5R 3M3
Canada
Toll Free: 1-800-387-0369
Local: 905-306-1093
Fax: [phone]
www.DXV.ca
In Mexico:
DXV
Via Morelos 330
Col. Santa Clara Coatitla
Ecatepec, Estado de México 55540
Toll Free: 01-800-8391200
www.DXV.mx
Thank you for selecting DXV. To ensure that your
installation proceeds smoothly, please read these
instructions carefully before you begin.

- 2 - M965518 Rev. 1.4 (4/18)
1INSTALL VALVE TRIM
TWO-WAY OR THREE-WAYE DIVERTER VALVE
CAUTION Turn off hot and cold water
supplies before beginning.
• Twist and pull off PLASTER GUARD (1). (TWO AND THREE WAY VALVES) Install ESCUTCHEON (4) onto ESCUTCHEON
HOLDER (2). Fig. A.
• Thread ESCUTCHEON HOLDER (2) with ESCUTCHEON (4) onto DIVERTER VALVE (3) until ESCUTCHEON (4) is flush
against finished wall. Fig. B.
• Turn VALVE STEM (5) clockwise to the off position. Align LEVER HANDLE ASSEMBLY (6) as shown or as desired and
install HANDLE ASSEMBLY (6) onto VALVE STEM (5). Thread HANDLE BASE (7) clockwise onto HANDLE ADAPTER (2)
until seated tightly against stop. Fig. C.
• Installation complete. Test Valve. Fig. D.
Fig. A.
Fig. C. Fig. D.
Fig. B.
3
2
13
4
57
6
4
2
2
FINISHED WALL

Replace the “YYY” with
appropriate finish code
POLISHED CHROME 100
BRUSHED NICKEL 144
MODEL NUMBER
D35104430
Keefe®
Handle Trim Kit for 2 Way
or 3 Way In-Wall Diverter
M964564-YYY0A
LEVER HANDLE
H960835.XXX
DIVERTER TRIM SLEEVE
M964562-YYY0A
ESCUTCHEON KIT
H2749.XXX
EXTENSION KIT
- 3 - M965518 Rev. 1.4 (4/18)