Dynex DX-TVM111 User manual

Slim-Prole TV Mount
QUICK SETUP GUIDE
DX-TVM111
Thank you for choosing the Dynex DX-TVM111.
The DX-TVM111 TV mount is designed to support
a TV weighing up to 30 lbs. (13.6 kg).
Package contents
A Wall plate (1)
B TV bracket (1)
C Locking bar (1)
M4 Bag
D M4 × 12 mm screws (4)
E M4 × 30 mm screws (4)
F M4 spacers (4)
G M4 washers (4)
Lag Bolt Bag
H Concrete wall
anchors (2)
I 1/4 in. × 2½ in.
lag bolts (2)
1 Attach the TV bracket
NOTE: Make sure there will be enough space between the back of the TV and
the wall to connect all your cables.
You can use the optional M4 spacers to provide additional space.
Without spacers: Attach the TV bracket (B)
to the back of the TV using
the M4 washers (G)
and the M4 × 12 mm
screws (D).
With spacers: Attach
the TV bracket (B) to the
back of the TV using the
M4 spacers (F), M4
washers (G), and
M4 × 30 mm screws (E).
NOTE: You can mount the
TV vertically or at an angle
(tilt mount). See Step 3
for more information.
Tools you will need:
• Power drill
• 1/8 in. wood drill bit
• ½ in. masonry drill bit
• Phillips screwdriver
• Level
• Socket wrench with
7/16 in. socket or
adjustable wrench
• Pencil
• Stud nder
• Awl
Lag Bolt Bag
1/4 in. × 2½ in.
M4
Option 2: Installing to a concrete wall
1Level the wall plate (A) and mark the hole locations.
2Drill the pilot holes as illustrated.
3Insert the concrete wall anchors into the pilot holes and make sure that
the anchors (H) are seated ush with the surface.
4Align the wall plate with the anchors, insert the lag bolts (I) through the
holes in the wall plate, then tighten the lag bolts (I) only until they are
pulled rmly against the wall plate (A).
DO NOT over-tighten the lag bolts (I).
CAUTION: Avoid potential injuries or property damage!
Any material covering the wall must not exceed 5/8 in. (16 mm).
CAUTION:To prevent property damage or personal
injury, never drill into mortar between blocks.
2 Install the wall plate
Option 1: Installing to a wood stud wall
1Locate the stud. Verify the center of the stud with an awl or thin nail or
use an edge to edge stud nder.
2Level the wall plate (A) and mark the hole locations.
3Drill the pilot holes as illustrated.
4Align the wall plate with the pilot holes, insert the lag bolts (I) through the
holes in the wall plate, then tighten the lag bolts only
until they are pulled rmly against the wall plate (A).
DO NOT over-tighten the lag bolts (I).
CAUTION: Avoid potential injuries or property damage!
Any material covering the wall must
not exceed 5/8 in. (16 mm).
5/8 in.
(<16 mm)**
2.5 in.
(63.5 mm)*
M4 × 12 mm
M4 Bag
M4 × 30 mm
M4
5/8 in.
(<16 mm)
*Drill the pilot hole to a
depth of 2.5 in. (63.5 mm)
2.5 in.
(63.5 mm)*
*Drill the pilot hole to a depth of 2.5 in. (63.5 mm)
**Maximum thickness of any material covering
the stud or concrete surface.
Without spacers
With spacers

SLIMPROFILE TV MOUNT I QUICK SETUP GUIDE I DXTVM111
3-year limited warranty
Visit www.dynexproducts.com for details.
We’re here for you
www.dynexproducts.com
For customer service, call:
800-305-2204 (U.S./Canada markets)
01 800-926-3020 (Mexico market)
© 2010 BBY Solutions, Inc., All Rights Reserved.
Distributed by Best Buy Purchasing, LLC 7601 Penn Avenue
South, Richeld, MN USA 55423-3645
Best Buy Imports, S. de R.L. de C.V. Av. Santa Fe 485, Segundo
Piso, Colonia Cruz Manca, Programa Parcial de Desarrollo
Santa Fe, Delegación Cuajimalpa, Distrito Federal, México
05349
© 2010 Best Buy UK Distributions Limited. All rights reserved.
Distributed by Best Buy Europe Distributions Limited. 1 Portal
Way, London W3 6RS
DYNEX is a trademark of BBY Solutions, Inc. Registered in
some countries. All other products and brand names are
trademarks of their respective owners.
6907-002009 <00>
ENGLISH 10-0163
3 Mount the TV to the wall
Place the TV bracket into the slotted anges of the wall plate. The TV
can be mounted either (1) vertically or (2) with a 5-degree tilt.
4 Lock the TV to the wall plate
Slide the locking bar (C) through the TV bracket (B) and the wall plate (A) to
secure the TV. A padlock (not included) may be used for extra security.
HEAVY! You will need
assistance with this step.
5°
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
CAUTION: Do not use this product for any purpose not explicitly
specied by Dynex. Improper installation may cause property
damage or personal injury. If you do not understand these
directions, or have doubts about the safety of the installation,
contact Customer Service or call a qualied contractor. Dynex is
not responsible for damage or injury caused by incorrect
installation or use.
The weight of yourTV must not exceed 30 lb (13.6 kg).The wall
must be capable of supporting ve times the weight of theTV
and wall mount combined.
This product contains small items that could be a choking hazard
if swallowed. Keep these items away from young children!
Vertical mount
Note: Attach the TV bracket to the ange that is closest to the wall plate.
Tilt mount
Note: Attach the TV bracket to the ange that is farthest from the wall plate. Vertical mount Tilt mount