Eachine X140HV User manual

X140HV
QUICK START GUIDE

Package included:
1 x X140HV Frame Kit
1 x Atmosphere light strip
4 x 1507/2500KV Brushless Motor
1 x 4 In 1 20A Brushless ESC
1 x Betaflight F4 Flight Controller
1 x FOXEER Arrow MICRO PRO Camera
1 x XF5805 /5.8G 40CH 25/100/200/300mw
Switchable VTX
1 x Multi functional taillight module
8 x T3056c Propeller (transparent purple * 2 Pairs /
transparent * 2 Pairs)
2 x 150*15mm battery strap
1 x Battery board set ( 2mm battery protection plate*1 ,
EVA plate*2 , Anti-slip plate*1 )
4 x M5 screws nut (black color*2 , sliver color*2)
1 x Screw set
10 x 2.5x100mm Nylon cable tie
2 x Wrench
X1 40 HV Q UIC K START GUIDE
-2-
FOXEER Arrow
MICRO PRO Camera
Betaflight F4
Flight Controller
Multi functional
taillight module
Switchable VTX
1507/2500KV
Brushless Motor
20A Brushless ESC
T3056c Propeller
Antenna

-3-
Contents
1.0 Frame kit----------------------------------------04
4.0 Flight controller---------------------------------05
2.0 ----------------------------------------04
Motor-----
5.0 Switchable VTX-------------------------------------06
3.0 Esc------------------------------------------------05
6.0 Camera-----------------------------------------------06
7.0 Atmosphere light strip
------------------------------07
8.0 Motor Unlock/Lock------------------------------07
9.0 Multi functional taillight module----------------07
10.0 Traversing flight---------------------------------08
X1 40 HV Q UICK START GUIDE

1.0 Frame kit
2.0 Motor
Wheelbase: 140mm
Floor thickness: 3mm
Upper plate thickness: 1.5mm
Side panel thickness: 1.0mm
CNC 6065 Custom Aluminum Column
-4-
KV: 2500kv
Voltage: 2-6s
Weight: 17.7g (including line)
Output shaft length: 14mm
Maximum pulling force: single 740g
(6S/3056 three-leaf paddle)
Maximum power: 480w
Number of slots: 9n12p
Mounting hole spacing: 12*12mm
Mounting hole specification: m2
Bearing: nsk
N52 NdFeB magnet
Recommended paddle: 3 inches
X1 40 HV Q UICK START GUIDE

3.0 ESC
Continuous current: 20A
Peak current: 25A (10s)
Bec output: NO
Input voltage: 2 ~ 6 s
Main control chip: 48mhz efm8bb2
Firmware upgrade: support dshot600 /blheli _ S/Oneshot125
MOS: 3*3
MOS model: pe632ba 30v53a
-5-
4.0 Flight controller
Main control chip: stm32f411
IMU: mpu6000 6-axis sensor
BEC: 5v/1a
Integrated OSD
PPM/DSM/IBUS/UAR sharing: UART1-RX
Installation size: 20*20
Weight: 3.0g
Support firmware: betaflight/cleanflight/inav
Support for programmable LED Sprit
Reserve buzzer interface
X1 40 HV Q UICK START GUIDE

-6-
5.0 Switchable VTX
Support TBS SmartAudio
Transmitting power: 25/100/200/300mw adjustable in three steps
Frequency points: 40ch
Video format: full NTSC / PAL format
Input voltage: 7V ~ 26V
Power consumption: +12V/600MW, 260ma
Size: 25 × 20 × 4mm
Weight: ≤ 3.2g (except antenna)
With copper tube mini antenna (ipex interface)
Tips: Before powering up, you must first install the antenna to
avoid the possibility of burning the tuner.
X1 40 HV Q UICK START GUIDE
6.0 Camera
Image sensor: 1/3" Sony Super Had II CCD + NextChip 2040 DSP
Pixel: PAL: 976 (H) x 494 (V); NTSC: 768 (H) × 494 (V)
TV system: PAL
Resolution: 600TVL (color) 650TVL (black and white)
Synchronization: internal
Minimum illumination: 0.01lux
WDR: Support
OSD programming board: support
White point repair: support
DNR: 2D DNR
Camera title: support
Image adjustment: support
OSD: Edit Name, Power, Flight Time
Input power: 5-40V
Storage temperature: -40 C~60 C
Working temperature: -10C~50C
Power consumption: 70ma
Low pressure alarm: support
Default mode: def, vivative, sunny, cloudy, led tr, usr1
Size: 18.5*19mm (without bracket)
Weight: 5.3g (without bracket)

7.0 Atmosphere light strip
8.0 Multi functional taillight module
Feature：Low power consumption, no heat, no impact on flight
time.Only 10% of the power consumption of traditional LEDs.
Beautiful, soft, not dazzling.Lines can be bended, folded and
sheared at will. The installation is flexible and convenient for
you to play freely,Long life.
Working voltage: 5v
Integrated programmable taillight / bb ring / light strip drive
RGB full color highlight WS2812b lamp beads *2
Integrated 80dBi buzzer
Integrated photon emission line driver
Size: 20*20
Weight: 3.5g
-7-
X1 40 HV Q UICK START GUIDE
9.0 Motor Unlock/lock
Put the throttle rocker at the lowest point, move the rudder rocker
to the right and keep it for more than 2 seconds. The blue state
indicator is always on, that is unlock the motor.
Put the throttle rocker at the lowest point, move the rudder rocker to
the leftmost side, and the red state indicator is always turned on to
lock the motor. At this time, pushing the throttle rocker motor upward
will not rotate.
Motor Unlock
Motor lock

-8-
10. Traversing flight
1).Flying is more suitable for experienced pilots.
2).During the flight, please keep the flight within the video
receiving range (the actual range depends on the flight
environment and weather conditions).
3).During flight, please avoid crowd, animals and
High voltage wires and other obstacles
X1 40 HV Q UICK START GUIDE