Easy@Home HTJ-2108-USW User manual

ID: #07177
m
y
h
a
n
s
e
c
o
n
t
r
o
l
.
c
o
m
C
E
R
T
I
F
I
E
D
User-friendly
Manual
HOME ENVIRONMENT
User Manual
Manual
del usuario
English .....06
Español .... 23
ULTRASONIC COOL
MIST HUMIDIFIER WITH
ESSENTIAL OIL TRAY
HUMIDIFICADOR ULTRASÓNICO
DE NIEBLA FRÍA CON PLATO DE AROMA

Table of contents
Scope of delivery....................................................................3
Components .................................................................................6
General information............................................................... 7
Reading and storing the user manual ..................................... 7
Proper use..................................................................................... 7
Explanation of symbols .............................................................. 7
Safety......................................................................................8
Signal symbol/word definitions................................................8
General safety information ........................................................8
First use..................................................................................13
Checking the product and package contents .......................13
Operation...............................................................................13
Setting up the product ..............................................................14
Filling with water........................................................................14
Connecting the product to power ...........................................15
Switching the product on and off ............................................15
Switching the bottom illumination on and off.......................15
Refilling with water ....................................................................15
Stopping operation ....................................................................16
Filling the essential oil tray .......................................................16
Cleaning.................................................................................17
Cleaning exterior parts............................................................. 18
Cleaning and descaling the water tank................................. 18
Cleaning the control unit.......................................................... 18
Cleaning the air vent................................................................. 18
Cleaning the essential oil pad ..................................................19
Cleaning the dust filter ..............................................................19
Maintenance......................................................................... 19
Changing the silver ion ball filter .............................................19
Storage ................................................................................. 19
Troubleshooting...................................................................20
Technical data .......................................................................21
FCC statement ........................................................................21
Disposal................................................................................. 22
Disposing of the packaging ..................................................... 22
Disposing of the product .......................................................... 22

Scope of delivery/Contenido de la caja
3
A
B
5
6
4
3
2
1
7
8
9
10
11
Scope of delivery/Contenido de la caja

Scope of delivery/Contenido de la caja
4
E
D
C
12
13
9
8
14
15
16
17
2

Scope of delivery/Contenido de la caja
5
G
OPEN
CLOSE
18
19
F
H
20
21

6
Scope of delivery
Components
1Lid
2Water tank
3Water level window
4Control unit
5Power touch key
6Light touch key
7Power cord with power plug
8Essential oil tray
9Essential oil pad
10 Silver ion ball filter
11 Air vent
12 Vapor discharge channel
13 Carrying handle
14 Vapor discharge opening
15 Water tank cap
16 Water tank opening
17 Vapor absorption unit
18 Bottom illumination
19 Bottom opening
20 Bottom cap
21 Dust filter

General information
7
General information
Reading and storing the user manual
This user manual accompanies this Ultrasonic Cool Mist Humidifier
with Essential Oil Tray (subsequently referred to simply as the
“product”). It contains important information about start-up and
handling the product.
Before using the product, read the user manual carefully. This particularly
applies to the safety instructions. Failure to heed this user manual may result in
severe injury or damage to the product.
Store the user manual for future use. Make sure to include this user manual
when passing the product on to third parties.
Proper use
The product is designed exclusively for humidifying interior
spaces. It is intended only for personal use and is not suitable
for commercial purposes.
Only use the product as described in this user manual. Any
other use is deemed improper and may result in damage
to property or even personal injury. The product is not a
children’s toy.
The manufacturer or vendor accepts no liability for damage
caused by improper or incorrect use.
This user manual is also available for download at
www.wachsmuth-krogmann.com.
Explanation of symbols
The following symbols and signal words are used in this user manual, on the
product or on the packaging.
This symbol provides you with useful supplementary information
on assembly or operation.
This symbol identifies electrical appliances that are equipped
with double insulated housing and are therefore designated as
Protection Class II.

Safety
8
5011813
The ETL Listed Mark is proof that the product has been
independently tested and meets the applicable published
standard.
5011813
This FCC mark certifies that the electromagnetic interference
from the device is under the limits approved by the Federal
Communications Commission in the US.
Safety
Signal symbol/word definitions
The following symbols and the signal words are used in this user manual.
WARNING!
This signal symbol/word designates a
hazard with a moderate degree of risk
which may lead to death or severe injury if
not avoided.
NOTICE! This signal word warns against potential
damages to property.
General safety information
IMPORTANT SAFEGUARDS
READ AND SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
WHEN USING ELECTRICAL APPLIANCES, BASIC PRECAUTIONS
SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK, AND INJURY TO PERSONS, INCLUDING THE
FOLLOWING:
WARNING!
Risk of electric shock!
A faulty electrical installation or excessive line voltage may
result in an electric shock.
− Only connect the product if the line voltage of the power
outlet corresponds to the rating plate specification.
− Only connect the product to an easily accessible outlet so
that you can quickly disconnect it from the power grid in
case of a failure.

Safety
9
− Do not use the product if it is visibly damaged or if the
power cord or power plug is defective.
− If the product’s power cord is damaged, the cord must be
replaced by the manufacturer, its after-sales support, or a
person with similar qualifications to avoid risks.
− Do not open the housing; instead, have a qualified
professional carry out the repairs. Contact a qualified
workshop for this. Liability and warranty claims are
waived in the event of repairs performed by the user,
improper connection of the device or incorrect operation.
− Only parts that comply with the original device
information may be used for repairs. This product contains
electrical and mechanical parts which are essential for
providing protection against sources of danger.
− Do not operate the product with an external timer or
separate remote control system.
− Do not submerge the product, power cord, or power plug
in water or other liquids.
− Never touch the power plug with wet hands.
− Never pull the power plug out of the power outlet by the
power cord; instead, always do so by taking hold of the
power plug.
− Never use the power cord as a carrying handle.
− Keep the product, power plug, and power cord away from
open flames and hot surfaces.
− Lay the power cord out in such a way that it does not pose
a tripping hazard.
− Do not kink the power cord and do not lay it over sharp
edges.
− Only use the product in indoor areas. Do not use it in wet
rooms or in the rain.
− Never store the product so that it is at risk of falling into a
bathtub or washbasin.
− Never retrieve an electrical device by hand if it has fallen
into water. In this case, immediately pull the DC connector/

Safety
10
power plug out of the power outlet.
− Make sure that children do not insert any objects in the
product.
− Always switch the product off and pull the power plug out
of the power outlet when you are not using the product,
cleaning it, filling it with water (see section on “Filling with
water”), or in the event of a fault.
− Disconnect the product from the power supply when
filling it with water, emptying it, and cleaning it.
− This product has a polarized plug (one blade is wider than
the other). To reduce the risk of electric shock, this plug is
intended to fit into a polarized outlet only one way. If the
plug does not fit fully into the outlet, reverse the plug. If
it still does not fit, contact a qualified electrician. Do not
attempt to modify the plug in any way.
WARNING!
Danger for children and persons with impaired physical,
sensory, or mental capacities (e.g. partially disabled
persons, older persons with reduced physical and mental
capacities) or lack of experience and knowledge (e.g. older
children).
− This product may be used by children aged eight and
over as well as persons with impaired physical, sensory
or mental capacities or those lacking experience and
knowledge if they are supervised or have been instructed
in how to safely use the product and have understood the
risks associated with operating it. Children must not play
with the product. Cleaning and user maintenance must
not be performed by unsupervised children.
− Keep children under eight years of age away from the
product and connection line.
− Do not leave the product unattended while in operation.
− Do not let children play with the packaging. Children may
get caught in it when playing and suffocate.

Safety
11
WARNING!
Health hazard!
Improper use of the product may result in injury to your health.
− WARNING: Microorganisms, which might be in the water
or surrounding environment where the product is
being used or stored, can grow in the water tank and be
released into the air, leading to serious health risks if the
water is not replaced and if the water tank is not properly
cleaned every three days.
− Please note that high air humidity can promote the
growth of biological organisms in the environment.
− Do not allow the area around the product to get wet or
damp. Reduce the release of vapor if moisture occurs.
Only use the product periodically if you cannot reduce
the release of vapor. Do not let absorbent materials (e.g.
carpets, curtains, drapes, or tablecloths) get wet.
− Do not leave any water in the water tank if the product is
not being used.
− The product must be emptied and cleaned before being
put away. The product must be cleaned before the next
use.
NOTICE!
Risk of damage!
Handling the product improperly may damage the product.
− Place the product on an easily accessible, level, dry, heat-
resistant, and sufficiently stable work surface. Do not place
the product on the edge of the work surface.
− Prevent heat from building up by not placing the product
directly up against a wall or under cupboards or similar.
The released vapor or heat produced could damage
pieces of furniture.
− Do not cover the product during operation.

Safety
12
− Never place the product on or near hot surfaces
(hotplates, etc.).
− Ensure that the power cord does not come into contact
with hot parts.
− Never expose the product to high temperatures (heaters,
etc.) or to the effects of the weather (rain, etc.).
− Do not expose the product to direct sunlight or hot
circulating air.
− Do not use the product with ambient temperatures below
32 °F (0 °C). If the water in the water tank is frozen, wait
until it has melted.
− If the room temperature is below 32 °F (0°C), empty the
water tank. Freezing water can damage the product.
− Never fill the water tank with water that is above 104 °F
(40 °C) to prevent discoloration or deformation.
− Only put water in the water tank; never put water in the
other parts of the product.
− Never put water into the product’s vapor discharge
opening or vapor discharge channel. Wipe wet areas on
the product with a dry cloth.
− Do not put any metals, chemicals, or cleaning agents in
the water tank. Otherwise, humidification will not work
properly.
− Never remove residual water from the steam pipe when
the product is switched on. This can destroy the sensor.
− Do not move the product around too much if there is a lot
of water in the water tank. Otherwise, water may leak and
get into other parts of the product.
− Never attempt to clean the product by immersing it in
water, and do not use a steam cleaner to clean it.
Otherwise, the product could be damaged.
− Do not in any case place the product in the dishwasher. It
would be destroyed as a result.

First use
13
− Stop using the product if its plastic parts exhibit cracks or
breaks or are deformed. Replace damaged parts only with
corresponding original spare parts.
− Refer to the chapter “Cleaning” for proper cleaning.
First use
Checking the product and package contents
NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a
sharp knife or other pointed objects, you may quickly damage
the product.
− Be very careful when opening it.
1. Take the product out of the packaging.
2. Check to make sure that all parts are included (see Fig.A).
3. Check whether the product or the individual parts exhibit damages. If this
is the case, do not use the product. Contact the manufacturer at the service
address specified on the warranty card.
4. Rinse the water tank cap 15 and the water tank 2with clear water.
Operation
NOTICE!
Risk of damage!
Unusual noises or odors may be a sign that the product is
damaged.
− If there are any unusual noises or odors coming from
the product, immediately pull the power plug out of the
power outlet.
− Contact the manufacturer at the service address specified
on the warranty card.

Operation
14
NOTICE!
Risk of damage!
The product can be quickly damaged when used with an
empty water tank.
− Never use the product without water in the water tank.
• It is best to use the product with cool boiled or distilled water.
• Change the water in the water tank on a regular basis to keep the
product clean.
• With a full tank, the product can operate continuously for
7 to 12hours without having to refill.
Setting up the product
− Connect the product to a power outlet with a power voltage corresponding
to the rating plate.
Filling with water
WARNING!
Risk of electric shock!
If the product falls over with a full water tank, the outcoming
water can flow out onto other electrical devices and cause
electric shock.
− Set the product down in a safe place.
− Empty the water tank if you do not intend to use the
product for an extended period.
− Make sure that the device is unplugged when you are
adding water to it.
1. Grab the water tank 2by the carrying handle 13 and remove it from the
control unit 4. Place the water tank upside down.
2. Turn the water tank cap 15 counterclockwise to take it off (see Fig. E).
3. Use the water tank opening 16 to pour max. 0.74 gallon (2,800 ml) of water
into the water tank (see Fig. F). You can read the water level through the
provided water level window 3.
4. Turn the water tank cap clockwise to put it back on and dry off any remaining
water with a dry cloth (see Fig. F).

Operation
15
5. Put the water tank with the vapor absorption unit 17 facing downward
onto the control unit.
Connecting the product to power
− Connect the product to a power outlet.
Switching the product on and off
The product has three levels of humidification. Press the power touch key 5to
change the level of humidification. Based on the level selected, the power touch
key will illuminate a certain color.
Color Level of humidification
Red High
Yellow Medium
Green Low
1. Press the power touch key to switch the product on.
The power touch key illuminates red.
2. To select a different level of humidification, press the power touch key again
until it illuminates the desired color.
3. To switch the product off, press the power touch key again until it stops
illuminating.
Switching the bottom illumination on and off
The product has blue-colored LED bottom illumination on the bottom of the
control unit 4(see Fig. G).
1. Press the light touch key 6to switch on the bottom illumination 18 . The
button illuminates blue.
2. Press the light touch key again to switch off the bottom illumination.
Refilling with water
The integrated safety mechanism automatically stops the
humidification process when there is no water in the water tank. The
power touch key 5flashes red and vapor is no longer released
from the vapor discharge opening 14 (see Fig. D).
1. To use the product again, pull the power plug 7out of the power outlet
and fill the water tank 2with water (see chapter “Filling with water”).
2. Insert the power plug into the power outlet and switch on the product (see
chapter “Switching the product on and off”).

Operation
16
Stopping operation
1. To switch off the product, press the power touch key 5(repeatedly if
necessary) until it stops illuminating.
2. Pull the power plug 7out of the power outlet.
Filling the essential oil tray
NOTICE!
Risk of damage!
The product can be damaged if you fill the essential oil tray
with water.
− Do not fill the essential oil tray with water.
Fragrance oil can be put in the essential oil tray. The released
vapor absorbs the fragrance oil through the essential oil pad and
distributes it in the ambient air.
The amount of fragrance oil to be used depends on the type of oil
and your personal preferences. If you are not sure, add a little less
fragrance oil to the essential oil tray.
1. Remove the lid 1from the water tank 2.
2. Remove the essential oil pad 9(see Fig. A and C).
3. Add fragrance oil into the essential oil tray 8.
4. Put the essential oil pad in the essential oil tray.
Make sure that the essential oil pad can absorb the fragrance oil and that the
fragrance oil does not spill out of the essential oil tray and leak.
5. Place the tray with the essential oil pad on top of the water tank so that the
opening is located on the vapor discharge channel 12 (see Fig. C).
If you do not want to use fragrance oil, remove the tray and store it in a cool
place.
6. Put the lid on the water tank.

Cleaning
17
Cleaning
WARNING!
Risk of electric shock!
Water or other liquids that have penetrated the housing may
cause electric shock.
− Always unplug the product and let it cool completely
before cleaning and putting it away!
WARNING!
Health hazard!
Improper use of the product may result in injury to your health.
− The water tank must be emptied and refilled every three
days. Before the water tank is filled, it must be cleaned
according to the instructions provided in the chapter
“Cleaning”. Any deposits, residues, or dirty film that has
formed on the water tank’s surfaces or inner surfaces must
be removed. All surfaces must be rubbed dry.
NOTICE!
Risk of short circuit!
Water or other liquids that have penetrated the housing may
cause a short circuit.
− Never submerge the product in water or other liquids.
− Make sure that no water or other liquids penetrate the
housing.

Cleaning
18
NOTICE!
Risk of damage!
Handling the product improperly may damage the product.
− Do not use any aggressive cleaners, brushes with metal or
nylon bristles, or sharp or metallic cleaning utensils such
as knives, hard scrapers and the like. They could damage
the surfaces.
− Never attempt to clean the product by immersing it in
water or any other fluids, and do not use a steam cleaner
to clean it. Otherwise, the product could be damaged.
− Do not in any case place the product in the dishwasher. It
would be destroyed as a result.
The water tank must be cleaned every three days. The control unit
must be cleaned once a week.
− Before cleaning, pull the power plug 7out of the power outlet.
Cleaning exterior parts
− Use a slightly moistened cloth to wipe down the outside of the product.
Then let all parts dry completely before operating the product again.
Cleaning and descaling the water tank
− Unscrew the water tank cap 15 and remove any deposits or dirt particles
that have collected in the water tank. Wipe off limescale deposits with a
damp cloth and use a little vinegar to dissolve the limescale. Then rinse the
water tank’s cap and the water tank 2with clear water.
Cleaning the control unit
− Use a damp cloth to wipe off limescale deposits inside and on the surface
of the control unit 4. If necessary, use a little vinegar to dissolve the
limescale.
Cleaning the air vent
− Wipe the air vent 11 with a damp cloth. If necessary, use a little vinegar to
dissolve the limescale. Let the air vent dry completely.

Maintenance
19
Cleaning the essential oil pad
− Wash the essential oil pad 9with warm water and let it dry completely
before using it again.
Cleaning the dust filter
1. Remove the water tank 2from the control unit 4and put it aside.
2. Carefully pour out any leftover water in the control unit.
Place the control unit upside down. Push in the bottom cap 20 , turn it to the
left, and remove it from the bottom opening 19 (see Fig. G and H).
3. Remove the dust filter 21 and wash it with warm water. Let it dry completely
before using it again.
4. Push the bottom cap in and turn it to the right to close the bottom opening
(see Fig. H).
Maintenance
Changing the silver ion ball filter
• The silver ion ball filter ensures that there are no germs in the
stagnant water.
• The silver ion ball filter should be replaced after 160 hours of
operation. Otherwise, it will lose its effectiveness.
1. Remove the water tank 2from the control unit 4and put it aside.
2. Remove the old silver ion ball filter 10 and replace it with a new one
(see Fig. B).
3. Put the water tank with the vapor absorption unit 17 facing downward onto
the control unit.
You can order/purchase a new silver ion ball filter from the address listed on the
warranty card. Only use original silver ion ball filters.
Storage
− Empty and clean the water tank 2, remove water from the inside of the
control unit 4, and wipe all parts dry with a cloth.
− Keep the product in the original packaging, out of the reach of children, and
in a dry place.

Troubleshooting
20
Troubleshooting
Fault Possible cause Solution
The touch keys
5/ 6do not
illuminate.
No water vapor is
released.
The power plug 7
has not been inserted
properly.
The product is
switched off.
− Insert the power plug in a
power outlet.
− Press the power touch
key.
The power touch
key flashes ten
times and turns off.
No water vapor is
released.
There is no water in
the water tank 2.
− Fill the water tank with
water.
The water vapor
smells.
The product is new.
The water in the
water tank is not
clean.
− Clean the water tank.
− Replace the water tank if the
problem persists.
The power touch key
illuminates. No water
vapor is released.
The water level in the
control unit 4is too
high.
− Pull the power plug.
− Remove the water tank
from the control unit and
pour some water out of the
control unit.
− Screw on the water tank cap
15 .
Only a small amount
of water vapor is
released.
The water is not clean
or has been allowed
to stand for too long.
− Change the water in the
water tank.