Easy@Home MD19143 User manual

ID: #07177
m
y
h
a
n
s
e
c
o
n
t
r
o
l
.
c
o
m
C
E
R
T
I
F
I
E
D
User-friendly
Manual
HOME ENVIRONMENT
User Manual
Manual
del usuario
English .....06
Español .... 19
LED ULTRASONIC
HUMIDIFIER
HUMIDIFICADOR ULTRASÓNICO
CON LUZ LED

Contents
Package contents................................................................3
Components ............................................................................. 6
General information............................................................7
Reading and storing the user manual ..................................7
Proper use..................................................................................7
Explanation of symbols ...........................................................7
Safety...................................................................................8
Signal symbol/word definitions............................................ 8
General safety instructions .................................................... 8
First use...............................................................................11
Checking the product and package contents ....................11
Basic cleaning.......................................................................... 12
Operation............................................................................12
Filling water into the water tank.......................................... 13
Adding essential oils .............................................................. 13
Starting the vaporization process........................................ 13
Using the LED light.................................................................. 14
Troubleshooting................................................................ 14
Cleaning............................................................................. 15
Storage .............................................................................. 16
Technical information ....................................................... 16
Disposal...............................................................................17
Disposing of the packaging .................................................. 17
Disposing of the product ....................................................... 17
FCC statement .....................................................................17

Package contents/Volumen de suministro
3
CB
Dok./Rev.-Nr. 197698_20190812
A
1
2
4
3
5
6
8
9
7
9 9
Package contents/Volumen de suministro

Package contents/Volumen de suministro
4
GF
D
E
1
2
7
10
10

Package contents/Volumen de suministro
5
I
J
H
1
2
7
4
5
6
8

Package contents
6
Components
1Mist nozzle
2Water tank
3LED light
4LED on/off button
5Moisture output control knob
6Power indicator light
7Base unit
8Aroma tray with aroma pad
9Power adapter
10 Water tank cap

General information
7
General information
Reading and storing the user manual
This user manual accompanies this LED ultrasonic humidifier
(hereafter referred to as the “product”), and contains important
information on setup and handling.
Before using the product, read the user manual carefully. This
particularly applies to the safety instructions. Failure to do so may result in
personal injury or damage to the product.
Store the user manual for further use. Make sure to include this user manual
when passing the product on to third parties.
Proper use
The product is exclusively designed for humidifying the room air and for
atomizing commercially available fragrances and essential oils dissolved in
water in the living areas. It is only intended for private indoor use and not
suitable for commercial purposes.
Only use the product as described in this user manual. Any other use is
considered improper and may result in damage to property or persons.
The manufacturer or vendor cannot be held liable for damages or injury
incurred through improper or incorrect use.
Explanation of symbols
The following symbols are used in this user manual, on the product or on the
packaging.
This symbol provides you with useful additional information on
handling and use.
Polarity
4007202
The ETL Listed Mark is proof that the product has been
independently tested and meets the applicable published
standard (power adapter).
This symbol identifies products that belong to protection class II
(power adapter).
External power adapter with Level VI energy efficiency

Safety
8
This symbol indicates products that are designed for indoor use
only.
Safety
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions
should always be followed including the following notes.
READ ALL INSTRUCTIONS BEFORE
USING THIS PRODUCT
Signal symbol/word definitions
The following symbols and signal words are used in this user manual.
WARNING! This signal symbol/word designates a hazard
with moderate risk, which may result in
death or severe injury if not avoided.
NOTICE! This signal word warns of possible damage
to property.
General safety instructions
WARNING!
Risk of electric shock!
A faulty electrical installation, excessive line voltage, or incorrect
operation may result in an electric shock.
− Only connect the product if the line voltage of the outlet
corresponds to the data on the rating plate.
− Only connect the product to an easily accessible outlet so
that you can quickly disconnect it from the power supply
in the event of a problem.
− Do not use the product if it is damaged or if the power cord
or plug is defective.

Safety
9
− If the power cord of the product is damaged, the
manufacturer, the customer service team or a person with
similar qualifications must replace it to avoid risks.
− Do not open the housing; instead, have a qualified
professional perform repairs. Contact a qualified repair
shop for this. Liability and warranty claims are waived
in the event of repairs performed by the user, improper
connection or incorrect operation.
− Only parts that comply with the original device data
may be used for repairs. This device contains electrical
and mechanical parts which are essential for providing
protection against sources of danger.
− Do not use the product with an external timer or separate
remote control system.
− Do not immerse the base unit or the power adapter in
water or other liquids.
− Never touch the power adapter with wet or damp hands.
− Do not pull the power adapter out of the outlet by the
cord; instead, always pull it out by the adapter itself.
− Never move, pull, or carry the product by its power cord.
− Keep the product and the power adapter away from open
flames and hot surfaces.
− Lay the power cord so that it does not pose a tripping
hazard.
− Do not kink the power cord and do not lay it over sharp
edges.
− Only use the product indoors. Do not use the product
outdoors or in the rain.
− Do not place the product such that there is a risk of it
falling into a tub or sink.
− Never reach to retrieve an electrical device if it has fallen
into water. In such a case, immediately disconnect the
power adapter.

Safety
10
− Never insert any objects into the housing.
− Always switch the product off and unplug it when you are
not using it, when you intend to clean it, when you remove
or replace the water tank or in the event of a malfunction.
WARNING!
Danger for children and persons with impaired physical,
sensory or mental capacities (e.g., partially disabled
persons, older persons with reduced physical and mental
capacities) or lack of experience and knowledge (e.g.,
older children).
− If they are supervised or have been instructed on how
to safely use the product and have understood the risks
associated with operating it, this product may be used
by children ages eight and over as well as persons with
impaired physical, sensory or mental capacities, or those
lacking experience and knowledge. Children may not play
with the product. Cleaning and user maintenance must
not be performed by unsupervised children.
− Keep children under the age of eight away from the
product and power adapter.
− Do not leave the product unattended while in use.
− Make sure that children do not play with the plastic
packaging material. They may get caught in it when
playing and suffocate.
NOTICE!
Risk of damage!
Improper handling of the product may result in damage to the
product.
− Place the product on an easily accessible, level, dry and
sufficiently stable surface. Do not place the product on the
edge of the surface.

First use
11
− Do not place the product on top of other electrical
appliances or on a rug or carpet. It is recommended to
place a waterproof mat or pad under the product.
− Do not allow the mist nozzle to directly face furniture,
clothing or wall.
− Never expose the product to extreme conditions, such as
high humidity, extremely high or low temperatures, direct
sunlight and open fire.
− Never attempt to clean the product by immersing it
in water and do not use a steam cleaner to clean it.
Otherwise, you could damage the product.
− Stop using the product if its plastic parts exhibit cracks or
breaks or are deformed. Only replace damaged parts with
corresponding original spare parts.
SAVE THESE INSTRUCTIONS
Keep the user manual for future reference.
First use
Checking the product and package contents
NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a
sharp knife or other pointed object, you may quickly damage
the product.
− For this reason, be very careful when opening it.
1. Take the product out of the packaging.
2. Check to make sure that all parts are included (see Fig. A).
3. Check whether the product or individual parts are damaged. If this is the
case, do not use the product. Contact the manufacturer via the toll free
telephone number indicated on the warranty card.

Operation
12
Basic cleaning
1. Remove the packaging material.
2. Clean all parts of the product before first use as described in the chapter
“Cleaning”.
Operation
NOTICE!
Risk of damage!
Improper handling of the product may result in damage to the
product.
− Always switch the product off and unplug the product
when filling water into the water tank or emptying water
from the water tank.
− Do not operate the product when the water tank is empty.
− Do not overfill the water tank. See chapter “Technical
information” for the maximum capacity.
− Do not move or remove the mist nozzle while the product is
turned on to prevent splashing or spilling.
− Do not fill the water tank with water above 113 °F (45 °C).
− Allow the product to cool for one hour after prolonged use
(3–6 hours) to avoid damaging the vibration generator.
− Only use 100 % pure and natural essential oil suitable
for diffusion. Consult the label on the essential oil for
appropriate usage directions.
− Only add the essential oil on the aroma tray with aroma
pad on the base unit. Never add it into the water tank.
− Drain the water and disconnect the product after each use.

Operation
13
Filling water into the water tank
1. Make sure the product is switched off and the power adapter 9is
disconnected from the base unit 7and the power outlet (see Fig. B).
2. Remove the mist nozzle 1from the water tank 2and lift the water tank
off of the base unit (see Fig. D).
3. Turn the water tank upside down and unscrew the water tank cap 10 (see
Fig. E).
4. Fill the water tank with clean water below 113 °F (45 °C) (see Fig. F). Do not
overfill the water tank.
5. Replace and tighten the water tank cap. Dry any spilled water on the water
tank if necessary (see Fig. G).
6. Place the water tank onto the base unit and replace the mist nozzle on the
water tank (see Fig. H).
Adding essential oils
1. Lift the water tank 2off of the base unit 7.
2. Add a few drops of your desired essential oil on the aroma tray with aroma
pad 8in the base unit (see Fig. I).
The aroma pad should only be continuously used for the same
type of essential oil. Before reusing the aroma pad with another
essential oil, clean it gently in warm water and allow it to air dry
thoroughly.
Starting the vaporization process
1. Fill the water tank 2and add your desired essential oil as described in
previous chapters.
2. Connect the power adapter 9to the base unit 7and plug it to a
properly installed and easily accessible outlet (see Fig. C).
3. Adjust the mist nozzle 1so that it faces a proper direction.
4. Turn the moisture output control knob 5to the right to switch the product
on. Adjust the desired moisture output by turning the moisture output
control knob between the and positions (see Fig. J).
The power indicator 6lights up green and the vaporization process
begins.
5. Turn the moisture output control knob to the I/O position to end vaporization.
The power indicator turns red when the water level is low and
the vaporization process is about to end. Turn the moisture
output control knob to the OFF position, unplug the product and
refill the water tank before using the product again.

Troubleshooting
14
Using the LED light
Once the product is connected to a power supply, you can turn the LED
light 3on by pressing the LED on/off button 4(see Fig. J).
− Press repeatedly the LED on/off button to set a lighting mode: automatic
color change, violet, indigo blue, light blue, green, yellow, orange, red and off.
− Press the LED on/off button for about 2 seconds to turn off the LED light
from any lighting mode.
Troubleshooting
NOTICE!
Risk of damage!
If you do not use the product properly, you could damage it.
− Do not open the housing; instead, have qualified
professionals perform the repairs. Contact a qualified
repair shop for this. Liability and warranty claims are
waived in the event of repairs performed by the user or
incorrect operation.
Some problems may be caused by minor faults that you can fix yourself. To do
so, follow the instructions in the following table.
If it is still not possible to resolve the problem, contact customer service. Do not
repair the product yourself.
Problem Solution
The product cannot be
switched on.
Make sure the power adapter is connected to the
base unit and a power outlet.
Strong odor during
vaporization.
− Clean the water tank (see chapter “Cleaning”).
− Always fill the water tank with fresh water.
No vaporization. Fill the water tank with sufficient amount of water.
Water spills out or
leaks.
− Make sure the water tank is not overfilled.
− Make sure the water tank cap is tightened.
− Place the water tank properly on the base unit.

Cleaning
15
Cleaning
WARNING!
Risk of injury!
Improper handling of the product may increase the risk of injury.
− To avoid the risk of electric shock, always unplug the
product before cleaning.
NOTICE!
Risk of short circuit!
Water or other liquids that have penetrated the housing may
cause a short circuit.
− Make sure that no water or other liquids penetrate the
base unit.
− Never immerse the base unit in water or other liquids.
NOTICE!
Risk of damage!
Improper handling of the product may result in damage to the
product.
− Do not use any aggressive cleaners, brushes with metal or
nylon bristles, or sharp or metallic cleaning utensils such
as knives, hard scrapers and the like.
They could damage the surfaces.
− Do not put the product in the dishwasher, as this will
destroy it.
It is recommended to clean the product after 5–6 uses.

Storage
16
1. Unplug the product before cleaning.
2. Let the product cool off completely.
3. Clean various parts of the product as follows:
Water tank: Rinse the water tank with a vinegar solution. If necessary, use a
bottle brush for cleaning. Rinse the water tank with warm water to remove
any vinegar residue.
Exterior surface and mist nozzle: Wipe clean the external surfaces with a
damp cloth. A mild cleaning solution can be applied for stubborn dirt.
Aroma pad: Clean it gently in warm water and allow it to air dry thoroughly.
4. Let all parts dry completely before next use.
Storage
All parts must be completely dry before being stored.
− Always store the product in a dry area.
− Protect the product from direct sunlight.
− Store the product so that it is not accessible to children.
Technical information
Product
Model: MD19143
Power voltage: 24 V DC 650 mA
Output power: 15 W
Weight: approx. 1.42 lbs (with power adapter)
Dimensions (W × D × H): approx. 6.45" × 6.45" 9.5" (16.4 × 16.4× 24 cm)
Water tank volume: 0.34 gallon (1.3 L)
Ultrasonic frequency: 1.7 MHz
Ingress protection: IP 20: Protected against the ingress of solid
objects with a diameter ≥ 0.49 in (12.5mm).
Product code: 99699
Power adapter
Input voltage/current: 100–240 V~, 50/60 Hz, max. 0.4 A
Output voltage/current: 24V , 650mA
Protection class: II
Efficiency class: 6
Polarity: (center positive, barrel negative)
Model no.: GQ12-240065-AU

Disposal
17
Disposal
Disposing of the packaging
− Sort the packaging before you dispose of it. Dispose of paperboard and
cardboard with the recycled paper service and wrappings with the appro-
priate collection service.
Disposing of the product
− Should the product no longer be capable of being used at some point in
time, dispose of it in accordance with the regulations in force in your
city or state.
− Please ensure your recycling information applies to local regulations and
the EPA recommendations (www.epa.gov).
FCC statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.

18

Contenido
19
Contenido
Volumen de suministro.........................................................................3
Componentes ......................................................................................20
Información general........................................................................... 21
Leer y guardar el manual del usuario ......................................................21
Uso apropiado ..............................................................................................21
Descripción de símbolos.............................................................................21
Seguridad............................................................................................ 22
Definiciones de símbolos y términos de advertencia ........................... 22
Instrucciones generales de seguridad ................................................... 22
Primer uso ...........................................................................................26
Comprobación del contenido del producto y del embalaje ................26
Limpieza básica...........................................................................................26
Funcionamiento..................................................................................26
Rellenar el depósito de agua .................................................................... 27
Añadir aceites esenciales ..........................................................................28
Comenzar el proceso de vaporización ....................................................28
Uso de la luz led...........................................................................................28
Resolución de problemas...................................................................29
Limpieza ..............................................................................................30
Almacenamiento................................................................................. 31
Datos técnicos...................................................................................... 31
Eliminación.......................................................................................... 32
Eliminación del embalaje ..........................................................................32
Eliminación del producto ..........................................................................32
Declaración de la FCC .......................................................................... 32

Componentes
20
Componentes
1Boquilla de vapor
2Depósito de agua
3Luz led
4Botón de encendido/apagado de la luz led
5Regulador de vapor
6Luz indicadora de encendido
7Unidad base
8Bandeja de aroma con cápsula de aroma
9Adaptador de corriente
10 Tapa del depósito de agua