Easy@Home EE-3186A User manual

ULTRASONIC COOL MIST HUMIDIFIER
HUMIDIFICADOR ULTRASÓNICO
DE NIEBLA FRÍA
English……Page 3
Español…..Página 17

Contents
Parts List…..……………………………………………………………3
Contents 4
Assembly 5
General Information.………………………………….……………. 6
Safety Instructions 8
User Instructions …………………………………………………….9
Cleaning and Maintenance……………………………..………….12
Troubleshooting………………………………………………………14
Other Useful Information……….………………………………….15
Technical Specifications 15
Storing 15

Ultrasonic Humidifier ________ MAIN PARTS
AFTER SALES SUPPORT 3
888-367-7373 customer-servic[email protected]m
MAIN PARTS
Fig. 1 (Central Body)
1. Central Body (water
basin)
2. Power Cord
3. Regulator Control
Knob
4. Humidity Output
Indication
5. Red/Green Power Light
Fig. 1
Fig. 2 (Top of Water
Tank)
6. Vapor Outlet Channel
7. Water Tank Handle
Fig. 2
Fig. 3 (Water Basin)
8. Nebulizer
9. Vaporization Chamber
10. Fan Vent
11. Valve Opener
12. Water Level Sensor
Fig. 3
Fig. 4 (Bottom of Water
Tank)
13. Water Tank Valve
14. Water Tank Cap
15. Vapor outlet channel
Fig. 4
3
3
5
3
4
3
6
3
2
3
1
3
7
3
8
3
9
3
10
3
11
3
12
3
13
3
14
3
15
3

Ultrasonic Humidifier ________ CONTENTS
4 AFTER SALES SUPPORT
888-367-7373 [e-mail]
Fig. 5 (Water Tank Lid)
16. Water Tank Lid
17. Vapor Output
Fig. 5
CONTENTS OF PACKAGING
(Note: Humidifier is pre-assembled and ready to use)
Humidifier base
Water Tank
Water tank lid with vapor output slots
Instruction manual
17
16
3

Ultrasonic Humidifier ________ ASSEMBLY
AFTER SALES SUPPORT 5
888-367-7373 customer-servic[email protected]m
ASSEMBLY
Before Each Use
CHECK HUMIDIFIER PLACEMENT - Place the Humidifier on a non-metallic, lint
free, waterproof, level surface for best performance. This is to help disperse the
mist in the air and prevent it from being knocked or tipped over.
CHECK WATER LEVEL SENSOR –Make sure that the water level sensor is
secured properly. Refer to “cleaning and maintaining water level sensor” on page
12 for instructions on how to assemble the water level sensor.
CHECK FAN VENT –
This fan vent is located on the bottom of the
humidifier. The purpose of the Fan Vent is to
blow the cool mist through the vapor outlet
slots. It is important that this part is kept
clean and free of obstructions. We
recommend checking the fan vent before using
this item (i.e. lint, paper).
Do not place humidifier on top of a towel, or a
carpeted surface. The fan vent on the bottom
may become blocked, and overheat the
humidifier.
CAUTION:
DO NOT operate the humidifier without water in the water tank.
DO NOT plug in the power supply cord with wet hands; electric shock
could happen.
Be sure the humidifier is switched to OFF (O) and the humidifier is unplugged
from the electrical outlet.
Select a location for your humidifier on a flat surface approximately 4 inches
away from a wall.
DO NOT place the humidifier on a finished floor or near furniture which can be
damaged by moisture or water. Place on a water resistant surface.
DO NOT place humidifier on top of a towel, or a carpeted surface. The air vent
on the bottom may become blocked, and overheat the humidifier.

Ultrasonic Humidifier GENERAL INFORMATION
6 AFTER SALES SUPPORT
888-367-7373 [e-mail]
GENERAL INFORMATION
When using an electrical appliance, basic safety precautions should also be
observed, including the following. PLEASE READ AND SAVE ALL
INSTRUCTIONS BEFORE USING THE ULTRASONIC COOL MIST
HUMIDIFIER.
DO NOT carry water tank by handle when it is filled with water. It is advisable
to carry filled water tank with two hands.
DO NOT operate outdoors. This humidifier is intended for indoor use only.
Always have water in the tank when operating the unit.
Use only clean, cool tap water to fill the tank. Filtered or distilled water is
recommended to avoid white dust if tap water is too hard. DO NOT use hot
water.
DO NOT pour water in any openings other than the water tank.
Be sure that the water tank cap is firmly tightened. Always have the mist
direction nozzle and the mist chamber in place while the unit is operating.
Rotate the mist direction nozzle so it aims away from children, walls, furniture,
and electrical appliances.
Use only a 110-120VAC outlet. ALWAYS plug and unplug humidifier with
dry hands.
Never operate the humidifier with a damaged power supply cord or plug.
Always place the humidifier on a smooth, flat, lint free, non-metallic,
waterproof, level surface, and away from direct sunlight. Keep the power
supply cord away from heated surfaces and areas where it could be walked on
or tripped over. DO NOT let the cord hang over the edge of a table or counter.
Unplug the humidifier when not in use and whenever you clean or move the
humidifier.
DO NOT add medication of any type into the nozzle, base or water tank. Do
not cover any openings on the humidifier or insert objects into any openings.
The humidifier should not be left unattended in a closed room as the air could
become saturated and leave condensation on walls or furniture. Leave room
door partly open.
The humidifier requires daily and weekly cleaning to operate appropriately.
Refer to cleaning instructions.
When cleaning the inside of the unit keep water away from the air outlet / fan
vent. The exterior may be wiped with a damp cloth, except the electrical
controls, only when the unit is off and unplugged.
NEVER use detergents, gasoline, glass cleaner, furniture polish, paint thinner
or other household solvents to clean any part of the humidifier. Always use a
few drops of bleach with water to clean humidifier. Detergent film dissolved in
the water supply can interfere with the output of the unit.
Do not tilt or tip the unit or attempt to empty or fill it while it is in operation.

Ultrasonic Humidifier __ GENERAL INFORMATION
AFTER SALES SUPPORT 7
888-367-7373 customer-servic[email protected]m
THIS HUMIDIFIER IS NOT A TOY! Do not let your child play with this
appliance. Serious injury and electrocution might be possible. This appliance has
to be operated by an adult only. Children should be supervised to ensure that they
do not play with the humidifier.
WARNING! Read and understand all instructions. Failure to follow all instructions
listed below may result in electric shock, fire or serious personal injury. The
warnings, cautions, and instructions discussed in this instruction manual cannot
cover all possible conditions and situations that may occur. It must be understood
by the operator that common sense and caution are a factor which cannot be built
into this product, but must be supplied by the operator.
READ AND SAVE ALL INSTRUCTIONS!

Ultrasonic Humidifier _____ SAFETY INSTRUCTIONS
8 AFTER SALES SUPPORT
888-367-7373 [e-mail]
SAFETY INSTRUCTIONS
CAUTION: A short power supply cord is provided to reduce the risk of personal
injury resulting from becoming entangled in or tripping over a longer cord.
To avoid a circuit overload when using this humidifier, do not operate another
high-wattage product on the same electrical circuit.
Avoid the use of an extension cord because the extension cord may overheat
and cause a risk of fire. However if you have to use an extension cord, the
extension cord should be rated for 13 amps, 125V, 1625 watts.
The power supply cord must be arranged so that it will not drape over the
countertop or tabletop where it can be pulled on by children or tripped over
accidentally.
ELECTRIC POWER
If the electric circuit is overloaded with other appliances, your humidifier may not
operate properly. The humidifier should be operated on a separate electrical circuit
from other operating appliances.
POLARIZED PLUG
This humidifier has a polarized plug (one blade is wider than the other). As a safety
feature to reduce the risk of electrical shock, this plug is intended to fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat
this safety feature.
SAFETY WARNING
Although your Ultrasonic Humidifier is easy to operate, for your safety, the
warnings below must be followed:
1. Do not place the Ultrasonic Humidifier near a heat source.
2. Never leave the Ultrasonic Humidifier unattended while connected to the
electrical outlet.
3. Use the Ultrasonic Humidifier on a stable surface away from water.
4. Do not unplug the Ultrasonic Humidifier by pulling on the power supply cord.
5. The Ultrasonic Humidifier must be unplugged:
A. Before any cleaning or maintenance.
B. Before either filling or emptying.
C. After use.
D. If it appears to be faulty.
THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY.
SAVE THESE INSTRUCTIONS

Ultrasonic Humidifier _____ USER INSTRUCTIONS
AFTER SALES SUPPORT 9
888-367-7373 customer-servic[email protected]m
Fig. 6
Fig. 9
Fig. 8
Fig. 7
USER INSTRUCTIONS
CAUTION: ALWAYS USE CAUTION WHEN HANDLING THE ULTRASONIC
HUMIDIFIER. DO NOT DROP THE ULTRASONIC HUMIDIFIER.
1. Lift the water tank off the central body.
2. Turn over the water tank and unscrew the water
tank cap at the bottom of the tank by turning it
counterclockwise. (See Fig. 6 )
3. Fill water tank with cold water; do not fill all the
way to the rim. (See Fig. 7 )
Note: To avoid possible white dust due to hard
water, it is recommended to use filtered or
distilled water.
DO NOT use hot water. Use cool tap water.
DO NOT add any medication or other additives to
the water.
DO NOT pour water into Vapor Outlet Channel
(Part 7, Fig. 2, Page 4).
4. Replace the water tank cap, aligning the threads
on the tank with the threads on the cap, and turn
it clockwise (See Fig. 8 )
5. Turn the tank over, holding it by the top handle,
and place it on the central body, making sure it
fits perfectly. Place the water tank cap with
output slots on top of the water tank. (See Fig. 9 )
6. Note: Do not attempt to move humidifier while
water tank is placed on the water basin. Doing so
may cause leakage of water. Also do not place
humidifier on the floor. Place humidifier on an
elevated surface.

Ultrasonic Humidifier _____ USER INSTRUCTIONS
10 AFTER SALES SUPPORT
888-367-7373 [e-mail]
Fig. 10
Incorrect
Correct
7. Plug the power cord into a wall socket (do not use
extension cord) and turn on the unit by turning the
control knob. (See Fig. 10 )
8. The Power Light will turn on red. In a few seconds
it will switch to green, indicating that enough water
is in the water basin, and mist will start emitting
through the openings at water tank lid.
9. Use the humidity output regulator control knob to adjust the intensity of the
mist output. Turning the knob clockwise will increase the moisture output,
turning the knob counterclockwise will reduce the moisture output. (See Fig.
10 ) Note: When at maximum level it is normal to hear a faint dripping sound.
10. When the humidifier runs out of water the power light will turn red, and the
mist output will stop. This
is a safety feature to prevent the humidifier from possibly over heating and
damaging the nebulizer. This safety feature uses a water level sensor to stop
the nebulizer once the water level sinks below the required level in the water
basin. Turn the humidifier off and unplug before removing and refilling the
water tank. Please note that the Power Light on the humidifier body will stay
on. The (red) light signal indicates that the humidifier is turned on and needs
to be refilled.
SET THE CORRECT HUMIDITY OUTPUT
Adjust the mist control so that the mist rises up and gets absorbed by the room
air. Do not turn on too high an output as the mist cannot be absorbed by the air
and accumulates on the surface around the humidifier.
If the humidifier is placed near a fan or air conditioning outlet the mist may be
forced down by the foreign air stream. Change the location of the humidifier or
reduce the output of the other room conditioning appliances.

Ultrasonic Humidifier _____ USER INSTRUCTIONS
AFTER SALES SUPPORT 11
888-367-7373 customer-servic[email protected]m
A NOTE ABOUT HUMIDITY
It is best to keep the humidity level at about 30-50 percent of relative
humidity.
The comfort level of humidity will vary from room to room and with changing
room conditions.
In cold weather, windows and even some walls may fog or develop frost from
excessive indoor humidity. If this occurs, reduce the mist intensity setting to
avoid damage from condensed water dripping on windowsills.
Too much humidity in the room may allow moisture to accumulate on surfaces
where bacteria and fungi can grow. Moisture that gathers may also damage
furniture and walls, especially wallpaper.
To eliminate excessive humidity, especially in small rooms, leave the room
door open and adjust the mist intensity control setting.

Ultrasonic Humidifier __ CLEANING AND MAINTENANCE
12 AFTER SALES SUPPORT
888-367-7373 [e-mail]
CLEANING AND MAINTENANCE
Portable humidifiers require regular cleaning in order to reduce the risk of bacterial
growth and also to remove any scale residue to maintain good operational
performance. Follow the procedures below for healthy maintenance of your
Ultrasonic Cool Mist Humidifier.
CAUTION:
Always be sure that the humidifier is unplugged and switched OFF before cleaning
or attempting to clean or store the item. NEVER PLUG OR UNPLUG
HUMIDIFIER WITH WET HANDS.
DO NOT leave water in water tank or water basin when unit is not in use as it may
result in the buildup of mineral deposits and bacteria that can inhibit the output
efficiency of the humidifier. PLEASE NOTE that if water remains in the water tank
for more than a day or two, bacterial growth is possible.
NOTE: When removing water tank, water may accumulate under vapor lid and on
the bottom of the water tank. It is recommended to have a dry cloth ready to dry
wet surfaces.
DISINFECTING THE WATER TANK AND WATER BASIN
1. Fill water tank with 2 tablespoons of white vinegar in a ½ gallon of water. Let
stand 20 minutes, shaking vigorously with two hands every few minutes, drain
and rinse with clean water until the bleach smell is gone. Dry with a clean
cloth or paper towel.
2. Add 2 tablespoons of white vinegar to a ½ gallon of water into the water basin
and let it soak for 20 minutes. Wipe the water basin with a soft cloth. Rinse
the water basin with cool water. DO NOT IMMERSE WATER BASIN IN
WATER. An electric shock may result or the humidifier may be damaged.
3. Wipe all exterior surfaces of the base with a damp soft cloth.
4. It is normal for water to be in the water basin. However water must not get
inside the central body. If this should happen, take the humidifier to an
authorized service center before using it again.
NOTE: It is recommended to clean humidifier with the water and white vinegar
solution as stated above after using the humidifier about once a week or if cleaning
seems necessary.

Ultrasonic Humidifier __ CLEANING AND MAINTENANCE
AFTER SALES SUPPORT 13
888-367-7373 customer-servic[email protected]m
A NOTE ABOUT THE WATER LEVEL SENSOR: The water level sensor is made
of three key parts. When cleaning DO NOT MISPLACE these parts and MAKE SURE
that you assemble these three parts correctly after cleaning and before operating
humidifier. The three parts are as follows:
Plastic Cap –this part has 4 flat tabs coming out from the bottom and is
placed on top of a plastic peg
Water Float –a small round part resembling a flat donut located
underneath the Plastic Cap
Peg –plastic peg that secures water float and plastic cap
To clean the water float unscrew the plastic cap from the peg. Remove the water
float and clean with warm sudsy water. Replace the parts by first putting the water
float onto the peg and re-screwing the plastic cap onto peg.
IMPORTANT: Failure to keep this humidifier clean from mineral deposits
normally contained in any water supply will affect the efficiency of the operation.
Customer failure to follow these instructions may void the warranty.

Ultrasonic Humidifier ___ TROUBLESHOOTING
14 AFTER SALES SUPPORT
888-367-7373 [e-mail]
TROUBLESHOOTING
CAUTION: DO NOT attempt to repair the motor or nebulizer yourself. If
the humidifier continues to not operate please call our service center
(see toll free number below).
Problem
Solution
Humidifier Light is staying red and
not turning green
Humidifier is working than stops:
Ensure that water level sensor is
assembled properly.
Clean water float
Call service center and request
replacement water float
If humidifier does not work at all:
Ensure it is properly plugged into a
power outlet.
Check that the control knob is in
the ON position.
If Power On indicator light does not
come on, bring to authorized
service station.
If there is a strange odor:
Clean the tank with water and
vinegar or bleach and rinse with
clean water.
Leave the tank open for some time
without the cap, in a cool place.
The power light is green but there
is no mist being emitted:
Check that there is water in the
tank.
Check for possible lime deposits on
the water level sensor or the
nebulizer (see page 8 and 9).
Make sure that nothing blocks the
vapor output slots.
Check that the fan vent on bottom
of humidifier is not blocked.
Empty the humidifier and rinse the
water basin with cool tap water and
allow to dry for 15 to 30 min.
White dust appears and settles
outside the humidifier:
Area tap water may have too many
minerals, change to filtered or
distilled water.

Ultrasonic Humidifier ___ OTHER USEFUL INFORMATION
AFTER SALES SUPPORT 15
888-367-7373 customer-servic[email protected]m
OTHER USEFUL INFORMATION
Technical Specifications
Model Number EE-3186A
Rating Voltage 120V –60Hz
Rated Wattage 32W
STORING
Allow the humidifier to dry completely before storing. Store the humidifier in a dry
location. Do not place any heavy items on top of humidifier during storage as this
may result in possible damage of the appliance. Always check the plug before use
to assure metal items have not become attached.
Save the box for off-season storage.
Make sure the tank, water basin and water tank cap are thoroughly dry before
storing.
If water is left in the unit during storage, it may evaporate completely and
leave deposits that can prevent the unit from operating properly.
Leave the water tank refill cap loose to prevent the water cap and gasket from
sticking together. This will prolong the life of the gasket.
Service Center
If you have any questions in regards to the operation of this appliance please
contact our service center at:
Wachsmuth & Krogmann, Inc.
Tel: [phone]
Business Hours: Mon-Fri 10:00am –5:00pm EST
Email: customer[email protected]
Website: www.wk-usa.com
Environmental Protection
If the appliance should no longer work at all, please make sure that it is disposed
of in an environmentally friendly way.

Ultrasonic Humidifier __ GENERAL INFORMATION
Contenido
Lista de componentes ……………………………………………… 17
Contenido 18
Ensamblaje 19
Información general.………………………………….……………. 20
Instrucciones de seguridad 22
Modo de empleo ..…………………………………………………….23
Limpieza y mantenimiento……………………………..………….26
Detección y solución de problemas..………………………….…28
Información adicional de utilidad………………………………..29
Especificaciones técnicas 29
Almacenamiento 29

Humidificador ultrasónico COMPONENTES PRINCIPALES
SERVICIO POSVENTA 17
888-367-7373 customer-servic[email protected]m
COMPONENTES PRINCIPALES
Fig. 1 (Cuerpo central)
1. Cuerpo central
(cuenco de agua)
2. Cable de alimentación
3. Perilla de control del
regulador
4. Indicación de salida de
humedad
5. Luz de encendido
roja/verde
Fig. 1
Fig. 2 (Parte superior
del tanque de agua)
6. Canal de salida de la
niebla
7. Perilla del tanque de
agua
Fig. 2
Fig. 3 (Cuenco de agua)
8. Nebulizador
9. Cámara de
vaporización
10. Orificio de ventilación
del ventilador
11. Abertura de válvula
12. Sensor de nivel de
agua
Fig. 3
Fig. 4 (Parte inferior
del tanque de agua)
13. Válvula del tanque de
agua
14. Tapa del tanque de
agua
15. Canal de salida de la
niebla
Fig. 4
3
3
5
3
4
3
6
3
2
3
7
3
8
3
9
3
10
3
11
3
12
3
13
3
14
3
15
3
1
3

Humidificador ultrasónico_______ CONTENIDO
18 SERVICIO POSVENTA
888-367-7373 [e-mail]
Fig. 5 (Tapa del tanque
de agua)
16. Tapa del tanque de
agua
17. Salida de la niebla
Fig. 5
CONTENIDO DEL EMPAQUE
(Nota: El humidificador viene pre-armado y listo para usar).
Base del humidificador
Tanque de agua
Tapa del tanque de agua con ranuras de salida de la niebla
Manual de instrucciones
17
16
3

Humidificador ultrasónico ENSAMBLAJE
SERVICIO POSVENTA 19
888-367-7373 customer-servic[email protected]m
ENSAMBLAJE
Antes de cada uso
VERIFIQUE LA UBICACIÓN DEL HUMIDIFICADOR: Coloque el humidificador
sobre una superficie nivelada no metálica, sin pelusas e impermeable para obtener
el máximo rendimiento. Esto ayuda a dispersar la niebla en el aire y previene que
se golpee o vuelque el humidificador.
VERIFIQUE EL SENSOR DE NIVEL DE AGUA: compruebe que el sensor de
nivel de agua esté bien asegurado. Consulte la sección “Limpieza y mantenimiento
del sensor de nivel de agua” en la página 27 para conocer las instrucciones sobre
cómo se arma el sensor de nivel de agua.
VERIFIQUE EL ORIFICIO DE VENTILACIÓN DEL VENTILADOR:
Este orificio de ventilación se encuentra en la
parte inferior del humidificador. Su función es
hacer fluir la niebla fría a través de las ranuras
de salida de la niebla. Es importante mantener
esta parte limpia y sin obstrucciones.
Recomendamos verificar el orificio de
ventilación del ventilador antes de usar este
artículo (es decir, que no haya pelusas,
papeles, etc.).
No coloque el humidificador sobre una toalla o
superficie alfombrada. Se puede bloquear el
orificio de ventilación inferior y, en
consecuencia, sobrecalentar el humidificador.
PRECAUCIÓN:
NO ponga el humidificador en funcionamiento si el tanque de agua está
vacío.
NO conecte el cable de alimentación con las manos mojadas; podría
sufrir una descarga eléctrica.
Compruebe que el humidificador esté apagado (O) y desconectado del
tomacorrientes.
Elija un lugar para el humidificador sobre una superficie plana a unas 4
pulgadas de distancia de la pared.
NO coloque el humidificador sobre un piso terminado o cerca de muebles que
puedan dañarse por acción de la humedad o del agua. Coloque el aparato
sobre una superficie resistente al agua.
NO coloque el humidificador sobre una toalla o superficie alfombrada. Se
puede bloquear el orificio de ventilación de aire inferior y, en consecuencia,
sobrecalentar el humidificador.
Orificio de
ventilación

Humidificador ultrasónico INFORMACIÓN GENERAL
20 SERVICIO POSVENTA
888-367-7373 [e-mail]
INFORMACIÓN GENERAL
Al usar un aparato eléctrico, siempre deben seguirse medidas básicas de
seguridad, incluyendo las siguientes. POR FAVOR LEA Y CONSERVE TODAS
LAS INSTRUCCIONES ANTES DE USAR EL HUMIDIFICADOR
ULTRASÓNICO DE NIEBLA FRÍA.
NO transporte el tanque de agua usando la manija cuando está lleno de agua.
Se recomienda transportar el tanque de agua lleno con las dos manos.
NO lo ponga en funcionamiento en el exterior. Este humidificador está
destinado únicamente para uso en interiores. Siempre debe haber agua en el
tanque cuando la unidad esté en funcionamiento.
Utilice solamente agua del grifo limpia y fría para llenar el tanque. Se
recomienda usar agua filtrada o destilada para evitar el sarro si el agua del
grifo es demasiado dura. NO utilice agua caliente.
NO vierta agua en ninguna de las aberturas que no sean las del tanque de
agua.
Compruebe que la tapa del tanque de agua esté bien cerrada. Siempre tenga
colocadas la boquilla de dirección de la niebla y la cámara de la niebla cuando
la unidad esté en funcionamiento. Gire la boquilla de dirección de la niebla
para que no apunte a niños, paredes, muebles y aparatos eléctricos.
Utilice únicamente un tomacorriente de 110-120 VCA. SIEMPRE
conecte y desconecte el humidificador con las manos secas.
Nunca encienda un humidificador si el cable de alimentación o enchufe están
dañados.
Siempre coloque el humidificador sobre una superficie regular, plana, sin
pelusas, no metálica, impermeable y nivelada y fuera del alcance de la luz
directa del sol. Mantenga el cable de alimentación alejado de superficies
calientes y de áreas donde pudiera volcarse o provocar tropiezos. NO deje que
el cable cuelgue por el borde de una mesa o mesada.
Desconecte el humidificador cuando no esté en uso y siempre que necesite
limpiarlo o moverlo.
NO agregue medicación de ningún tipo en la boquilla, base o tanque de agua.
No cubra las aberturas del humidificador ni introduzca objetos en ninguna de
sus aberturas.
No debe dejar el humidificador sin atención en una habitación cerrada, ya que
el aire podría saturarse, dejando condensación en paredes y muebles. Deje la
puerta de la habitación parcialmente abierta.
El humidificador requiere limpieza diaria y semanal para que funcione
correctamente. Consulte las instrucciones de limpieza.
Cuando limpie el interior de la unidad, mantenga el agua alejada de la salida
de aire / orificio de ventilación del ventilador. Puede limpiar el exterior con un