Eaton ELC-GPXFERMOD User manual

IL05003013E.pdf
ELC-GPXFERMOD
GP Transfer Module Instruction Sheet
WARNING
Always read this manual before using the ELC-GPXFERMOD.
ELC-GPXFERMOD doesn’t support plug and play function. Please turn off power before plugging in
ELC-GP02 or ELC-GP04.
The voltage for ELC-GPXFERMOD is supplied from GP extension port. Please confirm
ELC-GPXFERMOD plugged direction when connecting to GP extension port to avoid serious damage.
ELECTRICAL SPECIFICATION
Item ELC-GPXFERMOD
Data Reserved Life 20 years
Times for Writing In 100,000 Cycles
Operation Temperature 0ºC~55ºC
Weight / Dimension 3g / 50.85×19.8×10 mm
MEMORY TRANSFER MODULE FUNCTIONS
The function of transfer module that ELC-GP Series provides to copy user program, system function and
passwords is different from the copy program. It is used to copy the whole HMI environment settings and
application programs to another HMI rapidly. It can save much time and manpower. The operation is in the
following.
Definition: Transfer module (ELC-GPXFERMOD) = XMOD, GP Series = GP
Step GPÆXMOD XMODÆGP
1 Turn the switch on the XMOD to GPÆXMOD Turn the switch on the XMOD to XMODÆGP
2 Insert the XMOD into the expansion port of GP Insert the XMOD into the expansion port of GP
3 Input the power to GP Input the power to GP
4 It will display “remove XMOD” on the screen and
power on again It will display “remove XMOD” on the screen and power on again

IL05003013E.pdf
HMI display message
GPÆXMOD (Copy HMI program to XMOD) XMODÆGP (Copy program in XMOD to HMI)
If the model type of GP does not correspond with the
model type of program of XMOD. GP will display:
GP series and XMOD is different
Press Enter to Confirm
GP seriesÆXMOD
Press Esc to Exit
(Application of GP04G and GP02G can’t be used each
other)
If there is no program in XMOD. GP will display:
The XMOD is Empty
XMOD ÆGP series is illegal
If the model type of GP does not correspond with the
model type of program of XMOD.
GP series and XMOD is different
Please Remove the XMOD
and Reboot
If the model type of GP corresponds with the model
type of program of XMOD. GP will display:
Press Enter to Confirm
GP seriesÆXMOD
Press Esc to Exit
Press <Enter> ton confirm to copy.
When executing writing in (data is transmitting and
indication LED of RS-485 will light, only for GP04) GP
will display:
GP series ÆXMOD
Please wait!
If the model type of GP corresponds with the model
type of program of XMOD. GP will display:
Press Enter to Confirm
GP seriesÆXMOD
XMODÆGP series
Press Esc to Exit
Press <Enter> ton confirm to copy.
When executing writing in (data is transmitting and
indication LED of RS-485 will light, only for GP04) GP
will display:
XMOD ÆGP series
Please wait!
When completing transmitting, GP will display:
Please Remove the XMOD and Reboot
Please turn the power off and remove XMOD from GP.
At this time, all program and system settings have
copied to XMOD.
When completing transmitting, GP will display:
Please Remove the XMOD and Reboot
Please turn the power off and remove XMOD from
GP.At this time, all program and system settings have
copied to XMOD.
DIMENSION AND INSTALLATION METHOD
(unit: mm)