edelkrone POCKETRIG2 User manual

Before operating your edelkrone,
please watch the user’s manual video.
POCKETRIG2
USER’S MANUAL
R
WHAT’S IN THE BOX & THE BASICS
MOUNTING YOUR POCKETRIG TO YOUR CAMERA AND ON A TRIPOD
HOW TO USE THE POCKETRIG ARM
ADJUSTING THE TENSION OF THE POCKETRIG ARM
HOW TO SET THE LENGTH OF THE RODS
CAUTIONS AND TIPS
1.
2.
3.
4.
5.
6.
TABLE OF CONTENTS
Shoulder piece
Belt attachment
3mm Allen wrench
Arm length adjustment knob
1.
2.
3.
4.
5.
6.
7.
8.
1/4” - 20 Mounting port
15mm Rods
Mounting wheel
1/4” - 20 Mounting screw
2
1
3
4
5
6
7
8
1. WHAT’S IN THE BOX & THE BASICS

1.
2.
3.
1.
2.
3.
Pull from the tip of the arm and turn outwards.
Loosen the thumb screw to set the length and tighten in place.
Hold the shoulder piece and turn it all the way down untill it stops turning.
Align your PocketRIG with the
tripod connection hole under
your camera.
Turn the mounting wheel as tight
as you can.
Make sure it doesn’t twist when
you apply force to it.
1
2
3
1
2
3
2
2
2. MOUNTING YOUR POCKETRIG TO YOUR CAMERA AND ON A TRIPOD
2
A detailed video explaining the mounting process can be found at:
manuals.edelkrone.com
3. HOW TO USE THE POCKETRIG ARM
A detailed video explaining how to use your PocketRIG and usage details can be
found at: manuals.edelkrone.com
2

PocketRIG has three points for tension adjustment. You can adjust the
tension of these points by using your 3mm allen wrench.
1
2
3
2
2
1
3
If you need more space for
equipment / accessories like
a follow focus or matte box,
you can unscrew the 15mm rods
Turn them 180 degrees
Screw them in from the other side.
2
1.
2.
3.
4. ADJUSTING THE TENSION OF THE POCKETRIG ARM
A detailed video explaining how to adjust the tension of the arm can be found
at: manuals.edelkrone.com A detailed video explaining how to use the rods can be found at: manuals.edelkrone.com
5. HOW TO SET THE LENGTH OF THE RODS

While adjusting the height of the system, do not change the angle of the
shoulder piece. Keep it locked.
The height of the system can be adjusted from the section shown in the
figure.
1
2
1.
2.
6. CAUTIONS AND TIPS
A detailed video explaining how to adjust the height of system can be found at:
manuals.edelkrone.com
Using your belt allows you to shoot
longer with heavier equipment without
fatigue.
If you are not going to attach any
equipment / accessories on the
rods, keep them closed while
using your PocketRIG.
While using the support arm, place
the curved part on your chest.
Hold your camera with your right
hand and hold the lens with your
left hand for the best stabilization.
To avoid getting pinched while
folding and unfolding the system,
always hold your camera with one
hand and move the parts from the
tips with your other hand.
To extend the arm downwards,
swing the arm all the way out
and rotate it down.
Attach to your belt using
the gap in the shoulder piece.
2
1
2
1.
2.

DISCLAIMER
edelkrone cannot be held responsible for damage caused by improper use or
modification of the product.
For more infromation and tips about your PocketRIG, please watch
the users manual videos at the link, manuals.edelkrone.com
2
When using with a regular camcorder, place your camcorder as shown above.
A detailed video containing all tips, cautions and most comfortable usage can be
found at: manuals.edelkrone.com © 2016, edelkrone www.edelkrone.com