Elite Screens EZ-Cinema Series Quick reference guide

PRODUCT WHITE PAPER
http://
www.
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd.| Elite Screen
Section 1: Screen Desig
n
1.1 What is it for?
The ezCinema Series
is a large venue ultra
detachable telescoping support bar hardware for residen
1.2 How does it work?
The ezCinema features a simple telescoping support mechanism for variable height settings and
solid rotating floor support feet for added stability.
while the ru
gged aluminum casing protects the screen
Section 2:
Product Features
2.1 Characteristics

MaxWhite™ 1.1 Gain material with standard black backing is durable and easy to clean
 4K Ultra HD Ready
 Easy to transport an
d set up for traveling

Features a simple telescoping support mechanism for variable height settings

Solid rotating floor support feet provides added stability

Wide projection viewing angle with 180° diffusion uniformity
 Built-
in carrying handle for enhance

Rugged aluminum casing protects the screen

3/4" black top/side masking with adjustable bottom rise masking

Large Venue Portable Projector Screen Available in diagonal sizes ranging from 56"
4:3, 16:9 and 16:10 aspect ratios
 Optional ca
rrying bags sold
available for 120", 135", and 150" models)

GREENGUARD® and GREENGUARD® Gold Certified UL 2818
2.2 Certifications
PRODUCT WHITE PAPER
www.
elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd.| Elite Screen
s Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
EZCINEMA SERIES
n
is a large venue ultra
-
portable projector screen that sets up easy using its
detachable telescoping support bar hardware for residen
tial or commercial presentations.
The ezCinema features a simple telescoping support mechanism for variable height settings and
solid rotating floor support feet for added stability.
Built-
in carrying handle enhances
gged aluminum casing protects the screen
.
Product Features
MaxWhite™ 1.1 Gain material with standard black backing is durable and easy to clean
d set up for traveling
Features a simple telescoping support mechanism for variable height settings
Solid rotating floor support feet provides added stability
Wide projection viewing angle with 180° diffusion uniformity
in carrying handle for enhance
d mobility
Rugged aluminum casing protects the screen
3/4" black top/side masking with adjustable bottom rise masking
Large Venue Portable Projector Screen Available in diagonal sizes ranging from 56"
4:3, 16:9 and 16:10 aspect ratios
rrying bags sold
separately
for models up to 100" (no optional carrying bags
available for 120", 135", and 150" models)
GREENGUARD® and GREENGUARD® Gold Certified UL 2818
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
s Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
n
portable projector screen that sets up easy using its
tial or commercial presentations.
The ezCinema features a simple telescoping support mechanism for variable height settings and
in carrying handle enhances
mobility
Product Features
MaxWhite™ 1.1 Gain material with standard black backing is durable and easy to clean
Features a simple telescoping support mechanism for variable height settings
Large Venue Portable Projector Screen Available in diagonal sizes ranging from 56"
- 150" in
for models up to 100" (no optional carrying bags

PRODUCT WHITE PAPER
http://
www.
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd.| Elite Screen
2.3 Model Numbers
Model
Number
Diag.
Size
Aspect
Ratio
Viewing
Height
(in)
F60NWV 60" 4:3 36.0
F72NWV 72" 4:3 43.2
F84NWV 84" 4:3 50.4
F100NWV 100" 4:3 60.0
F120NWV 120" 4:3 72.0
F135NWV 135" 4:3 81.0
F150NWV 150" 4:3 90.0
F80NWH 80" 16:9 39.2
F84NWH 84" 16:9 41.2
F100NWH 100" 16:9 49.0
F120NWH 120" 16:9 58.8
F135NWH 135" 16:9 66.2
F150NWH 150" 16:9 73.5
F56NWX 56" 16:10 73.5
F68NWX 68" 16:10 73.5
F80NWX 80" 16:10 73.5
F95NWX 95" 16:10 73.5
Section 3: Screen Material
Specifications
3.1 Characteristics
MaxWhite™ screen material is
the most versatile screen surface
for front projection
presentations. This material
provides the widest possible
viewer angles with perfect
diffusion uniformity while giving
precise definition, image color
reproduction and black & white
contrast. Screen surface has
PRODUCT WHITE PAPER
www.
elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd.| Elite Screen
s Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
Viewing
Width
(in)
Screen
Material Gain Case Color
N.W.
(lbs)
48.0 MaxWhite™ 1.1 Black 13.67
57.6 MaxWhite™ 1.1 Black 15.4
67.2 MaxWhite™ 1.1 Black 17.06
80.0 MaxWhite™ 1.1 Black 19.68
96.0 MaxWhite™ 1.1 Black 29.41
108.0 MaxWhite™ 1.1 Black 40
120.0 MaxWhite™ 1.1 Black 42.4
69.7 MaxWhite™ 1.1 Black 16.91
73.2 MaxWhite™ 1.1 Black 19.11
87.2 MaxWhite™ 1.1 Black 20.08
104.6 MaxWhite™ 1.1 Black 34.2
117.7 MaxWhite™ 1.1 Black 40.5
130.7 MaxWhite™ 1.1 Black 44.53
48.0 MaxWhite™ 1.1 Black 14.51
57.6 MaxWhite™ 1.1 Black 11.35
67.2 MaxWhite™ 1.1 Black 15.54
80.0 MaxWhite™ 1.1 Black 17.97
Specifications
the most versatile screen surface
diffusion uniformity while giving
reproduction and black & white
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
s Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
G.W.
(lbs)
Packaging
Dimensions
(LxWxH)
17.6 59"x6.5"x6.8"
19.8 68.9"7x"6.5"
22.58 78.2"7x"6.5"
25.4 91.3"7x"6.5"
35.58 108.3"x7.5"x7.5"
52 119.8"x7.6"x8"
56 132"x7.6"x8"
22.73 80.9"7x"6.5"
24.98 83.9"7x"6.5"
26.57 98.1"7x"6.5"
46.3 116.7"x7.6"x7.4"
48.5 130"x7.6"x8"
53.13 142.7"x7.6"x8"
17.11 59"x6.7"x6.7"
19.11 68.9"x7"x6.7"
21.67 78"x7.1"x6.7"
25.88 91.1"x6.7"x6.1"

PRODUCT WHITE PAPER
http://
www.
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd.| Elite Screen
black-
backing to avoid light penetration and can be cleaned safely with mild soap and water.
screen material is a multi-
layer, cross
Features & Benefits
 Multi-
layer weave and textured surface coating
 Gain: 1.1

View Angle: 180° (90° ± LR)
 Mildew Resistant
 Black backing

Active 3D and 4K Ultra HD ready

Surface can be easily cleaned with mild soap and water
 GREENGUARD® and
GREENGUARD®
3.2 Gain Chart
Specifications
Thickness
Weight
Maximum Height
On-axis Gain
Half-Gain Angle
PRODUCT WHITE PAPER
www.
elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd.| Elite Screen
s Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
backing to avoid light penetration and can be cleaned safely with mild soap and water.
layer, cross
-array coated with a matte wh
ite reflective compound.
layer weave and textured surface coating
View Angle: 180° (90° ± LR)
Active 3D and 4K Ultra HD ready
Surface can be easily cleaned with mild soap and water
GREENGUARD®
Gold Certified | UL 2818
0.36 mm
350 g/m2
3.2 M (10 ft)
1.0
Does not reach half gain
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
s Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
backing to avoid light penetration and can be cleaned safely with mild soap and water.
Woven
ite reflective compound.

PRODUCT WHITE PAPER
http://
www.
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd.| Elite Screen
Section 4: Execution
4.1 Precautions
Warning! Screen damage can result from product mishandling if the following precautions
are not followed.
In accordance with practicing home fire safety and to avoid screen damage, do not place the screen
near or besid
e a fireplace or high temperature appliances such as a gas stove, BBQ or heater. (Fig. 1)
Place the screen beyond the reach of children. (Fig.2)
Fig.1
4.2 Parts Identification
For models 100”, 120”, 135” and 150”
Lock
Front
Black
Box
Bottom Black Masking
White projection surface
Short Foot Cup
PRODUCT WHITE PAPER
www.
elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd.| Elite Screen
s Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
Section 4: Execution
Warning! Screen damage can result from product mishandling if the following precautions
In accordance with practicing home fire safety and to avoid screen damage, do not place the screen
e a fireplace or high temperature appliances such as a gas stove, BBQ or heater. (Fig. 1)
Place the screen beyond the reach of children. (Fig.2)
Fig.2
For models 100”, 120”, 135” and 150”
Black
Masking Border Edge
Long Foot Cup
Bottom Black Masking
White projection surface
Back
Box Cover
Big support rod
Locking sleeve
Small support rod
Bracket Hook
Upper scroll bar
Pull hook
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
s Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
Warning! Screen damage can result from product mishandling if the following precautions
In accordance with practicing home fire safety and to avoid screen damage, do not place the screen
e a fireplace or high temperature appliances such as a gas stove, BBQ or heater. (Fig. 1)
Back
Note: Second telescoping
rod available on 150”
models only.
Pull hook

PRODUCT WHITE PAPER
http://
www.
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd.| Elite Screen
Refer to the table below for information regarding quantity of the base feet and cup
Diagonal Size
QTY (Base foot)
100"
1 pcs
120"
1 pcs
135"
3 pcs
150"
2 pcs
Attention:
-
Please install the two telescoping support rods simultaneously when pulling up and retracting the
screen material.
- Do
not use the screen in a very strong windy environment
-
Do not use on uneven surfaces
New Functions and features of F1
1. Base foot
allows screen to be adjusted up to 1 inch to level the screen to the ground
2. 40” bottom black border of
F120
4.3 Setting up the screen
Installation:
The ezCinema screen is designed to be used as an easy to operate portable screen for a variety of presentation
environments. Its design enables it to
patio presentations. When packed, the unit carries with ease and opens up for projection presentations within
seconds. As a general rule, portable projector screens should be installed in
or open flame sources such as a heater, BBQ grill or fireworks display.
Adjustable
up to 1"
PRODUCT WHITE PAPER
www.
elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd.| Elite Screen
s Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
Refer to the table below for information regarding quantity of the base feet and cup
QTY (Base foot)
QTY (Short Foot Cup)
QTY (Long Foot Cup)
1 pcs
2 pcs 2 pcs
1 pcs
2 pcs 2 pcs
3 pcs
6 pcs 0 pcs
2 pcs
4 pcs 0 pcs
Please install the two telescoping support rods simultaneously when pulling up and retracting the
not use the screen in a very strong windy environment
Do not use on uneven surfaces
New Functions and features of F1
00 and above models:
allows screen to be adjusted up to 1 inch to level the screen to the ground
F120
and above models for better viewing for people in the back
The ezCinema screen is designed to be used as an easy to operate portable screen for a variety of presentation
environments. Its design enables it to
be versatile for use in either classroom, conference room, home or
patio presentations. When packed, the unit carries with ease and opens up for projection presentations within
seconds. As a general rule, portable projector screens should be installed in
an area free from wind and heat
or open flame sources such as a heater, BBQ grill or fireworks display.
Base foot
(available on
models 10
0" above
only)
Adjustment screw for
leveling
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
s Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
Refer to the table below for information regarding quantity of the base feet and cup
QTY (Long Foot Cup)
Please install the two telescoping support rods simultaneously when pulling up and retracting the
allows screen to be adjusted up to 1 inch to level the screen to the ground
and above models for better viewing for people in the back
The ezCinema screen is designed to be used as an easy to operate portable screen for a variety of presentation
be versatile for use in either classroom, conference room, home or
patio presentations. When packed, the unit carries with ease and opens up for projection presentations within
an area free from wind and heat
(available on
0" above
Adjustment screw for

PRODUCT WHITE PAPER
http://
www.
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd.| Elite Screen
Extend the base feet:
For sizes below 100”
Locate the base feet on the bottom of the box cover at each end and rotate the base foot until it forms a r
angle between the footboard and the cover box.
For sizes 100” – 150”
All models including 100” utilize the short and long feet cups. Locate each screw hole on the bottom of the
case of the screen and screw in a short foot cup on the base feet and the
cups included only in the 135” and 150” models
Open the box cover:
Unlatch the buckles on both ends of the box and open the box cover. Next, secure the box with one hand
while removing the telescopic sup
port rod with your other hand.
Long foot cup
PRODUCT WHITE PAPER
www.
elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd.| Elite Screen
s Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
Locate the base feet on the bottom of the box cover at each end and rotate the base foot until it forms a r
angle between the footboard and the cover box.
All models including 100” utilize the short and long feet cups. Locate each screw hole on the bottom of the
case of the screen and screw in a short foot cup on the base feet and the
long foot cup on the ends.
cups included only in the 135” and 150” models
.
Unlatch the buckles on both ends of the box and open the box cover. Next, secure the box with one hand
port rod with your other hand.
Long foot cup
Short cup
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
s Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
Locate the base feet on the bottom of the box cover at each end and rotate the base foot until it forms a r
ight
All models including 100” utilize the short and long feet cups. Locate each screw hole on the bottom of the
long foot cup on the ends.
Short
Unlatch the buckles on both ends of the box and open the box cover. Next, secure the box with one hand

PRODUCT WHITE PAPER
http://
www.
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd.| Elite Screen
Installing the support rod:
First, make sure that the hanging hook is pointing toward the front facing the same direction as the screen,
then insert the square end of the telescopic support ro
Pull up the screen:
Hold the pull hook with one hand, pull the screen up gently and hang it on the bracket hook.
Vertical Adjustment:
First loosen
the locking sleeve, and then hold the small support rod with
upwards until the screen is fully stretched to the desired position.
PRODUCT WHITE PAPER
www.
elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd.| Elite Screen
s Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
First, make sure that the hanging hook is pointing toward the front facing the same direction as the screen,
then insert the square end of the telescopic support ro
d into the support plate as shown below.
Hold the pull hook with one hand, pull the screen up gently and hang it on the bracket hook.
the locking sleeve, and then hold the small support rod with
the left hand so as to slowly raise it
upwards until the screen is fully stretched to the desired position.
Support Plate
When attaching/detaching the
screen to the pull hook, please be
sure to raise the screen using the
handle indicated here
as pulling on
other parts of the top support bar
may cause damage to the screen.
Make sure to firmly hold the handle
to avoid the screens from suddenly
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
s Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
First, make sure that the hanging hook is pointing toward the front facing the same direction as the screen,
d into the support plate as shown below.
the left hand so as to slowly raise it
When attaching/detaching the
screen to the pull hook, please be
sure to raise the screen using the
as pulling on
other parts of the top support bar
may cause damage to the screen.
Make sure to firmly hold the handle
to avoid the screens from suddenly

PRODUCT WHITE PAPER
http://
www.
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd.| Elite Screen
Adjusting the screen:
Hold the screen with the left ha
nd when the screen has been stretched to the desired position, and then rotate
the locking sleeve clockwise with the right hand until the telescopic rod is properly locked into position.
Screen completely assembled:
Below d
iagrams just used for reference and may vary on your model.
4.4 Preparing screen for storage
1. Pulling down the screen:
First, hold the telescopic support rod with the left hand and loosen the locking sleeve counter
right hand. Then shorten the telescoping support rod slowly into the full retracted position and tighten the locking
sleeve to secure it in place.
PRODUCT WHITE PAPER
www.
elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd.| Elite Screen
s Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
nd when the screen has been stretched to the desired position, and then rotate
the locking sleeve clockwise with the right hand until the telescopic rod is properly locked into position.
iagrams just used for reference and may vary on your model.
4.4 Preparing screen for storage
First, hold the telescopic support rod with the left hand and loosen the locking sleeve counter
right hand. Then shorten the telescoping support rod slowly into the full retracted position and tighten the locking
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
s Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
nd when the screen has been stretched to the desired position, and then rotate
the locking sleeve clockwise with the right hand until the telescopic rod is properly locked into position.
First, hold the telescopic support rod with the left hand and loosen the locking sleeve counter
-clockwise with the
right hand. Then shorten the telescoping support rod slowly into the full retracted position and tighten the locking

PRODUCT WHITE PAPER
http://
www.
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd.| Elite Screen
2. Retract the screen:
Remove the pull hook from the supp
ort bracket by lifting it about 2 cm up and then hold on to the pull hook
and lower the screen gently into the box.
3.
Pulling out the telescopic support rod
After telescoping the small supporting rod to its shortest positi
the supporting rod from the support plate.
PRODUCT WHITE PAPER
www.
elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd.| Elite Screen
s Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
ort bracket by lifting it about 2 cm up and then hold on to the pull hook
and lower the screen gently into the box.
Pulling out the telescopic support rod
:
After telescoping the small supporting rod to its shortest positi
on and tightening the locking sleeve, take out
the supporting rod from the support plate.
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
s Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
ort bracket by lifting it about 2 cm up and then hold on to the pull hook
on and tightening the locking sleeve, take out

PRODUCT WHITE PAPER
http://
www.
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd.| Elite Screen
4.
Storing the telescopic support rod:
Properly center the supporting rod in the middle to maintain the weight balance in the box wh
5. Draw the base feet back:
Slightly lift each end of the box in turn rotating the two base feet underneath until they are back into alignment
with the box.
6. Storing the screen:
The recommended place for storage would be a corner of the room or in a closet, but the ultimate choice is up to
you.
PRODUCT WHITE PAPER
www.
elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd.| Elite Screen
s Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
Storing the telescopic support rod:
Properly center the supporting rod in the middle to maintain the weight balance in the box wh
Slightly lift each end of the box in turn rotating the two base feet underneath until they are back into alignment
The recommended place for storage would be a corner of the room or in a closet, but the ultimate choice is up to
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
s Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
Properly center the supporting rod in the middle to maintain the weight balance in the box wh
en carrying.
Slightly lift each end of the box in turn rotating the two base feet underneath until they are back into alignment
The recommended place for storage would be a corner of the room or in a closet, but the ultimate choice is up to