Elite Screens M100S User manual

PRODUCT WHITE PAPER
http://www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
1
  
Section 1: Screen Design .
1.1 What is it for?
Manually operated (non-motorized) retractable ront projection screen with integrated
mounting solutions allowing it to be installed on the wall or ceiling suspended. The
Manual Screen is or commercial or residential ront projection presentations. It is an
ultra a ordable, high per ormance, manual pull-down projection screen.
1.2 How does it work?
The manual screen utilizes a spring loaded auto-locking system or variable height
adjustments. Pulling the lanyard or center handle brings down the screen material to the
desired height. Gently stopping on the downward pull and guiding the material as it rises
a ew inches into its locked position. A gentle pull on the center handle or lanyard will
cause the locking mechanism to disengage allowing the spring loaded retraction
mechanism to draw the screen back up into the casing.
Section 2: Product Features .
2.1 Characteristics
Screen Material
• MaxWhite™ B screen material is durable and easy to clean
• 4K Ultra HD and Active 3D ready
• 180° wide viewing angle or commercial presentations or residential home cinema
• Black backed screen material eliminates light penetration or superior color reproduction
• Standard 4-side black masking borders
Design and Installation
• Available in 100” diagonal sizes in 1:1, 4:3, 16:9, and 16:10 aspect ratio, 120” diagonal in
4:3, 16:9, and 16:10, and 135” diagonal in 4:3 ad 16:9
• Screen lanyard or easy operation included – allows screen’s pull down handle to be
reached rom high areas
• Dual wall and ceiling installation design
• Optional 6” and 12” L brackets available
• 2-year warranty
2.2 Certifications

PRODUCT WHITE PAPER
http://www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
2
2.3 Model Nu bers
Model
Nu ber
Diagonal
Size
Aspect
Ratio
View
Height
(in)
View
Width
(in)
Screen
Material Gain Case Color
Net
Weight
(lbs)
Gross
Weight
(lbs)
Packaging Di ensions
(LxHxW)
M100S 100" 1:1 71.0 71.0 MaxWhite B 1.0 White 12.2 14.5 89.0" x 4.7" x4.7"
M100V 100" 4:3 60.0 80.0 MaxWhite B 1.0 White 12.3 15.0 96.0"x 4.7" x 4.7"
M100H 100" 16:9 49.0 87.0 MaxWhite B 1.0 White 10.6 13.0 79.2" x 4.7" x 4.7"
M100X 100" 16:10 53.0 84.5 MaxWhite B 1.0 White 11.8 14.4 93.6"X4.7"X4.5"
M120V 120" 4:3 72.0 96.0 MaxWhite B 1.0 Black 21.6 25.4 114.7"x5.5"x5.5"
M120H 120" 16:9 58.8 104.6 MaxWhite B 1.0 Black 21.7 25.7 112.0"X5.5"X5.5"
M120X 120" 16:10 63.6 101.8 MaxWhite B 1.0 Black 21.4 24.7 106.1"x5.5"x5.5"
M135V 135” 4:3 81.0 108.0 MaxWhite B 1.0 White 30.3 37.6 118.0"x6.5"x6.0"
M135H 135” 16:9 66.2 117.2 MaxWhite B 1.0 Black 32.1 41.4 128.0"x6.3"x6.0"
Section 3: Screen Material Speci ications .
3.1 Characteristics
Elite’s MaxWhite™ B material is a matte white
material ormulated to meet our conventional
screens that delivers optimal picture quality. Its
neutral 1.0 gain allows or the widest possible
viewing angles o 180° (90° Le t and Right). The
matte sur ace o the MaxWhite™ B o ers superb
di usion uni ormity while delivering radiant
image and color reproduction. The screen sur ace
has black-backing to avoid light penetration and
can be cleaned sa ely with mild soap and water.
Features & Benefits
• Gain: 1.0
• Viewing Angle: 180° (90°LR)
• Black-backing
• Wide di usion uni ormity – maintains luminance levels throughout entire sur ace
• Sur ace can be cleaned with soap, water and a so t cloth
• Multi-Layer Weave and Textured
• Sur ace Coating
• Mildew Resistance

PRODUCT WHITE PAPER
http://www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
3
Specifications
Thickness
0.36 mm
Weight
350 g/m2
Maximum Height
3.2 M (10 t)
On
-
axis Gain
1.0
Hal
-
Gain Angle
Does not reach hal gain
3.2 Gain and Viewing Angle Chart
Section 4: Execution .
4.1 Installation Methods
Ceiling Installation
Wall Installation

PRODUCT WHITE PAPER
http://www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
4
Flush Wall Installation
1. Measure the distance of the keyholes on the end caps and mark the location of where
the screen is to be installed for the pre-drilled hole.
2. After marking the area and drilling the hole, insert the proper screw into the drilled
hole and leave about 1/ ” of an inch from the wall to mount the screen.
3. Mount your screen from the keyhole located on back of screen’s left and right end caps.
Note: Do not remove the end caps to mount the screen to the wall.
Removing the end caps will release the tension of the internal spring mechanism.
Note: No hardware is included with this screen for installation. For wall mounting in to drywall, drywall
anchors and screws will su ice to sustain the weight o this screen. For any other type o wall mounting,
please consult with your local hardware store to obtain the proper hardware.
Ceiling Installation
U-bolts included with Manual B series for hanging fro the
ceiling using chains and S-hooks. (Chains and S-hooks not
included)
Screen Operation
1. Pull the screen down from the lanyard or from the handle only
ata 90-degree angle. The screen is designed to lock at 2 inch
intervals. To achieve this, make sure to pull straight down and
allowing the screen to come up to lock into place. Do not attempt
to pull the screen down by the surface or touch the screen, as it
will damage the screen and void the warranty.
2. To retract the screen, simply pull the screen down more than 2
inches with a quick snap of the wrist and guide it back up in to the
housing without releasing the handle.
Attention: When retracting, always pull the screen down at a 90-degree
angle and do not let go until the screen is entirely inside the housing. I ever the screen eels stuck, keep in mind
that the screen’s mechanism is new and needs to be run up/down a ew times to loosen up. I this happens,
care ully, with a little orce, yank the screen straight down to unlock the mechanism.
Keyhole located on
back of end cap.
Side view

PRODUCT WHITE PAPER
http://www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
5
4.2 R-TYPE Installation Methods
A. Flush Wall Installation
1. Measure the distance of the keyholes on the end caps and mark the location of where
the screen is to be installed for the pre-drilled hole.
2. After marking the area and drilling the hole, insert the proper screw into the drilled
hole and leave about 1/ of an inch from the wall to mount the screen.
3. Mount your screen from the keyhole located on the back of the screen’s left and right end
caps.
B. Flush Ceiling Mounting (only for models 135” and above)
1. Measure the distance bet een the top scre holes located on the top of the end caps.
2. Mark the location o where the screen is to be installed or the pre-drilled hole.
3. Drill your hole, use a hollow wall anchor i needed
4. Insert the proper screw into the drilled hole and secure the screen to the ceiling.
C. Suspended Ceiling Installation for models 100”-120”)
1. You can hang the screen from the ceiling by using
chains (not included) and hooking them to the D-ring
loops on models 100”-120”, which are located on each end
of the end cap.
For models 135”- and above, D-ring or U-bolts (not
included) are required to create loops for anging t e
screen wit c ains from t eend caps’ flanges.
Note: Please consult with a hardware store pro essional or
proper screws or your speci ic wall or ceiling installation.
The installer must ensure that proper mounting hardware and
asteners used are o adequate strength and suitable or the mounting sur ace.
Models: 100
”
-
120
”
D
-
ring
Keyhole located on
back o end cap
Front view
Side view
Flange with a pair
o screw holes
Example shown is the end cap
or the 100”
–
120” models.
Models: 135
”
and above*
*U-bolts and D-ring not included.

PRODUCT WHITE PAPER
http://www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
6
Screen Operation
1. Pull the screen down from the lanyard or from the handle only at
a 90-degree angle. The screen is designed to lock at 2 inch intervals.
To achieve this, make sure to pull straight down and allowing the
screen to come up to lock into place. Do not attempt to pull the
screen down by the surface or touch the screen, as it will
damage the screen and void the warranty.
2. To retract the screen, simply pull the screen down more than two
inches with a quick snap of the wrist and guide it back up in to the
housing without releasing the handle.
Attention: When retracting, always pull the screen down at a 90-degree
angle and do not let go until the screen is entirely inside the housing. I ever the screen eels stuck, keep in mind
that the screen’s mechanism is new and needs to be run up/down a ew times to loosen up. I this happens,
care ully, with a little orce, yank the screen straight down to unlock the mechanism.
Section 5: Product Speci ications .
5.1.1 R-TYPE Di ensions for 100” and 120” odels
Model
Nu ber
Diag.
Size
Case
Length
(A)
View
W
(A1)
Screen
W (A2)
Weight
bar
Length
(A3)
Overall
Height
(B)
View
H
(B1)
Top
Border
(B2)
B3 B4 A4 B5 B6
Unit: Inches
M100V 100" 86.1 80.0 82.2 85.4 71.7 60.0 5.6 68.3 2.0 85.0 1.1 1.1
M100X 100" 88.7 87.0 84.8 88.0 63.8 53.0 4.7 60.5 2.0 87.6 1.1 1.1
M100S 100" 76.6 70.5 72.7 75.8 79.6 70.5 3.0 76.2 2.0 75.4 1.1 1.1
M100H 100" 93.3 87.2 89.4 92.5 59.9 49.0 4.7 56.5 2.0 92.1 1.1 1.1
M120V 120" 102.9 96.0 99.0 102.1 83.5 72.0 4.5 79.8 2.4 101.7 1.5 1.5
M120X 120" 108.7 101.8 104.8 107.9 75.1 63.6 4.5 71.3 2.4 107.5 1.5 1.5
M120H 120" 111.0 104.7 107.1 110.2 82.5 59.1 17.7 78.8 1.2 109.8 1.2 1.2
Unit:
M100V 100" 2188 2032 2088 2168 1821 1524 141 1736 50 2158 28 28
M100X 100" 2254 2210 2154 2234 1621 1346 119 1536 50 2224 28 28
M100S 100" 1946 1790 1846 1926 2021 1790 75 1936 50 1916 28 28
M100H 100" 2370 2214 2270 2350 1521 1245 120 1436 50 2340 28 28
M120V 120" 2614 2438 2514 2594 2121 1829 114 2026 62 2584 38 38
M120X
120"
2761
2585
2661
2741
1907
1615
114
1812
62
2731
38
38
M120H 120" 2820 2660 2720 2800 2096 1500 450 2001 30 2790 30 30

PRODUCT WHITE PAPER
http://www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
7
5.1.2 R-TYPE Di ensions for 135” odels
5.2.1 Drawings for 100” and 120” odels
Model
Nu ber
Diag.
Size
Case
Length
(A)
View
W (A1)
Screen
W (A2)
Weight
bar
Length
(A3)
Overall
Height
(B)
View
H (B1) B2 B3 B4 A4 Left/Right Border
Unit: Inches
M135V 135” 115.7 107.9 111.0 114.2 105.4 81.1 17.7 101.2 1.6 113.8 1.6
M135H 135” 126.0 118.1 121.3 124.4 90.9 66.5 17.7 86.7 1.6 124.0 1.6
Unit:
M135V 135” 2940 2740 2820 2900 2678 2060 450 2571 40 2890 40
M135H 135” 3200 3000 3080 3160 2308 1690 450 2201 40 3150 40

PRODUCT WHITE PAPER
http://www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
8
5.2.2 Drawings for 135” odels
5.3 E-TYPE Di ensions for 100" and 120" odels
Model
Nu ber
Diag.
Size
Case
Length
(A)
View
Width
(A1)
Screen
Width
(A2)
Weight
bar
length
(A3)
Overall
Height
(B)
View
Height
(B1)
B2 B3
Botto
Border
(B4)
Left
Border
(B5)
Right
Border
(B6)
Screen
Material
to Wall
(C1)
Unit: Inches
M100S 100" 77.1 70.5 72.7 75.7 79.4 70.5 2.9 76.1 2.0 1.1 1.1 0.9
M100V 100" 86.4 80.0 82.2 85.2 71.6 60.0 5.5 68.2 2.0 1.1 1.1 0.9
M100H 100" 93.8 87.2 89.4 92.4 59.8 49.0 4.7 56.4 2.0 1.1 1.1 0.9
M100X 100" 91.5 84.8 87.0 87.7 63.7 53.0 4.7 60.4 2.0 1.1 1.1 0.9
M120V 120" 102.7 96.0 99.0 101.9 83.4 71.9 4.5 79.6 2.4 1.5 1.5 0.9
M120H 120" 110.9 104.6 107.6 110.7 82.5 65.7 4.5 69.4 2.4 1.5 1.5 0.9
M120X 120" 108.1 101.6 104.6 107.7 74.9 63.5 4.5 71.2 2.4 1.5 1.5 0.9

PRODUCT WHITE PAPER
http://www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
9
Model
Nu ber
Diag.
Size
Case
Length
(A)
View
Width
(A1)
Screen
Width
(A2)
Weight
bar
length
(A3)
Overall
Height
(B)
View
Height
(B1)
B2 B3
Botto
Border
(B4)
Left
Border
(B5)
Right
Border
(B6)
Screen
Material
to Wall
(C1)
Unit:
M100S 100" 1958 1790 1846 1923 2017 1790 74 1933 51 28 28 23
M100V 100" 2194 2032 2088 2164 1819 1524 140 1732 50 28 28 23
M100H 100" 2382 2214 2270 2347 1519 1245 119 1433 50 28 28 23
M100X 100" 2323 2154 2210 2228 1618 1346 119 1534 50 28 28 23
M120V 120" 2609 2438 2515 2588 2118 1826 114 2022 62 38 38 23
M120H
120"
2816
2657
2733
2812
2096
1670
114
1762
62
38
38
23
M120X 120" 2745 2581 2657 2736 1902 1613 114 1808 62 38 38 23
5.4 Drawings for 100" and 120" odels

PRODUCT WHITE PAPER
http://www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
10
5.5 Pictures
Manual B Series White Casing – Closed
Casing Close Up o 100” and 120” models
Weight Bar Detail