Elite Screens ezFrame 2 Series Quick reference guide

  
http://www.elitescreens.com
1
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens ustralia
 
Section 1: Screen Design
1.1 What is it for?
The ezFrame 2 Series uses Elite’s CineWhite™ tensioned 1.1 gain material within a velveteen
coated frame. s an added bonus, a new installation kit is included free of charge.
1.2 How does it work?
new design feature for the CineWhite™ material is a rubber-edge border that makes
installation a lot easier and a lot less time consuming.
Section 2: Product Features
2.1 Characteristics
Screen Material
• Award Winning CineWhite™ 1.1 Gain front projection material with black backing and full tension
uniformity across entire viewing surface
• Outstanding picture uality at any viewing angle with no compromise in resolution or brightness
• Active 3D, 4K Ultra HD, and HDR Ready
• Available in the following range of diagonal sizes:
• 84" - 200" in 16:9 format
• 109" - 144" in 16:10 format
Design and Installation
• 2.4” width frame and is velvet coated
• Elegant velvet covered frame absorbs projector overshoot and increases picture contrast
• Assembles in minutes and includes installation hardware
• Split-frame design facilitates lower shipping costs without sacrificing uality
• Easy to assemble and install in minutes
• Wall brackets allow screen to slide horizontally for properly centered installation
• Installation kit includes: Wood screws & anchors, Wall Brackets, Screwdriver, Mallet
Quality and Reliability
• 2-year Parts & Labor manufacturer's warranty
• 3-year warranty offered through ENR-G program (Education, Non-Profit, Religious and
Government)

  ! 
http://www.elitescreens.com
2
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens ustralia
2.2 Model Numbers
Model Number
Diag.
Size
spect
Ratio
Viewable
Height
(in)
Viewable
Width
(in)
Screen Material
Case
Color
N.W.
(lbs)
G.W.
(lbs)
Packaging
Dimentions
(LxWxH)
R84WH2 84" 16:9 41.4 73.3 CineWhite™ Black 21.0 29.2 52.8"x6.7"x11.8"
R100H2 100" 16:9 48.8 87.0 CineGrey Black 24.9 34.3 61.4"x6.7"x11.8"
R100WH2 100" 16:9 48.8 87.0 CineWhite™ Black 24.2 33.5 51.4"x6.7"x11.8"
R106WH2 106" 16:9 52.0 92.2 CineWhite™ Black 25.5 35.1 63.5"x6.7"x11.8"
R110WH2 110" 16:9 53.9 95.9 CineWhite™ Black 26.5 36.9 65.5"x6.7"x11.8"
R120H2 120" 16:9 58.7 104.7 CineGrey Black 29.3 39.6 69.7"x6.7"x11.8"
R120WH2 120" 16:9 58.7 104.7 CineWhite™ Black 28.4 38.3 69.7"x6.7"x11.8"
R135H2 135" 16:9 66.1 117.7 CineGrey Black 31.4 42.0 78.2"x5.7"x15.8"
R135WH2 135" 16:9 66.1 117.7 CineWhite™ Black 31.2 41.9 78.2"x5.7"x15.8"
R150WH2 150" 16:9 73.6 130.7 CineWhite™ Black 35.1 46.4 85.6"x5.7"x15.8"
R165WH2 165" 16:9 80.9 143.8 CineWhite™ Black 39.7 51.3 92.9"x5.7"x15.8"
R180WH2 180" 16:9 88.2 156.9 CineWhite™ Black 43.1 57.8 100.2"x7.7"x15.8"
R200WH2 200" 16:9 98.0 173.1 CineWhite™ Black 48.3 63.9 110"x7.9"x15.8"
R109WX2 109" 16:10 57.5 92.0 CineWhite™ Black 25.9 36.4 69.4"x6.7"x11.8"
R114WX2 114" 16:10 60.0 96.0 CineWhite™ Black 27.6 39.0 72.1"x6.7"x11.8"
R125WX2 125" 16:10 66.2 106.0 CineWhite™ Black 30.6 40.3 77.2"x5.5"x15.8"
R144WX2 144" 16:10 76.3 122.1 CineWhite™ Black 34.2 46.0 88.4"x5.5"x15.8"
Section 3: Screen Material Specifications
3.1 Characteristics
3.1.1 CineWhite™
CineWhite™ (Tension Matte White) has broad
light dispersion through diffusion uniformity,
black & white contrast and true color
rendition making it the most versatile in Elite's
tensions screen product lines. This tension
PVC surface is the best choice for today's
high-contrast ratio projectors in commercial or residential presentations. The CineWhite™ material
e uals the performance to our MaxWhite™ product, but improves the experience with the superior

  ! 
http://www.elitescreens.com
3
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens ustralia
surface flatness. Uniform diffusion surface has black-backing to eliminate light penetration and is easily
washable with mild soap and water.
Features & Benefits
• Multi-layer PVC (Polyvinyl chloride) with texture and surface coating
• Gain: 1.1
• View Angle: 180° (90° ±LR)
• Full Lambertian Diffuser- no half gain drop
• Produces exceptional picture uality for any presentation
• Mildew Resistant
• Active 3D and 4K Ultra HD ready
• Surface can be cleaned with (water) moist cotton cloth
3.1.2 CineGrey
CineGrey (Tension High Contrast Grey) is
designed for low contrast DLP and LCD Home
Cinema Projectors. Its superior flatness makes
the CineGrey ideal for home theater use. It
enhances black levels while minimizing loss in
color reproduction. Uniform diffusion surface
has black-backing to eliminate light
penetration and is easily washable with mild soap and water. *Manufacturer's Tip: if your projector's
contrast ratio is more than 2000:1, we recommend you use CineWhite™ material for a brighter picture.
Features & Benefits
• Multi-layer PVC with texture and surface coating
Specifications
Thickness 0.27 mm
Weight 350 g/m2
Maximum Height 3.2 M (10 ft)
On-axis Gain 1.1
Half-Gain ngle Does not reach half gain

  ! 
http://www.elitescreens.com
4
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens ustralia
• Gain: 1.0
• View Angle: 160° (80° ±LR)
• Mildew Resistant
• Black backing
• Surface can be cleaned with (water) moist cotton cloth
• Active 3D and 4K Ultra HD ready
3.2 Gain Chart
3.2.1 CineWhite™
Specifications
Thickness 0.3 mm
Weight 350 g/m2
Maximum Height 3.2 M (10 ft)
On-axis Gain 1.0
Half-Gain ngle t 50°

  ! 
http://www.elitescreens.com
5
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens ustralia
3.2.2 CineGrey
Section 4: Execution
4.1 Care and Use Instructions
Dust, dirt and scratches on the projection surface will affect the picture quality, please take note of
the points below to prevent that from occurring:
• Do not touch the projection surface with your hands
• Do not write or draw on the projection surface
• Do not use fingers or sharp objects to point on the projection surface; this will damage the
screen material.
• Use a soft-damp cloth to clean the projection surface; do not use chemical cleaning agents
or alcohol.
• Use clean water when dampening the cleaning cloth and do not rub against the material to clean it.

  ! 
http://www.elitescreens.com
6
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens ustralia
4.2 Hardware and Parts List
. Frame Parts x 6 pcs (4 top/bottom frame pcs + 2 side frame pcs)
B. Screen Material x 1 pc
C. Center joints x 2 pcs
D. Elbow Joints x4pcs
E. Wall brackets x4pcs (depending on model/size)
F. Wood Screws x 8pcs
G. Drywall anchors x 8pcs
H. M5x15 screws x 16 pcs
I. Center Support Bar x 1 - 2 pcs (depending on model/size)
J. Support joiner x 2 - 4 pcs (depending on model/size)
K. Fix Plates x 60 - 180 pcs (depending on model/size)
L. Rubber hammer x 1 pc
M. Screw driver x 1 pc
Note: Please make sure all parts are included in your package before proceeding to assemble your fixed
frame projection screen.
4.3 FR ME SSEMBLY
1. Insert the center joint connector into to one of the 1/2 horizontal frames and fasten it with two
M5x15 screws.
2. Insert the other ½ horizontal frame piece to the center joint (c) connector and fasten it with
twoM5x15 screws (h).Repeat steps 1 and 2 for assembling the second horizontal frame.
bevel
½ Long Frame
M5×15 Screw

  ! 
http://www.elitescreens.com
7
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens ustralia
Push
Push
Short frame
Short frame
Note: a. Two½ size horizontal frames should be assembled for a screen.
b. Do not tighten the screws completely until all frame pieces have been assembled
correctly.
3. Insert both elbow joint (d) connectors into the long horizontal frame and fasten it with twoM5x15
screws (h) seeFig.1. Then insert the vertical short frames into the exposed elbow joint(d)connectors
and fasten them with M5x15 screws(fig.1.2).
Push Push
Joint
Long frame
( fig.1)
M5x15
Bevel connection
½ Long Frame
Push
Horizontal Long
M5x15
(Fig.1.1)
M5x15 Screws
Screw
(Fig.1.2)
M5x15 screws

  ! 
http://www.elitescreens.com
8
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens ustralia
Push
Push
( fig.2)
Insert the exposed ends of the joint connectors
into the short (vertical) frame and align the four
corners so that they meet at perfect right angles
4. Join all four frame parts together following the steps shown below. (Fig.2)
Note: When assembled, please push simultaneously the two ends of the long frames.
4.4 ttaching the screen material to the frame
1. Make sure the screen material and frame are both lying face down on a clean, dry, and non-abrasive
surface.
2. Carefully unroll the material inside the frame. (Fig.3)
Please note the material will be noticeabl smaller than the frame, as the material must be stretched to create a
sufficient amount of tension for perfect material flatness.
M5
"
15 screws
Screw

  ! 
http://www.elitescreens.com
9
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens ustralia
3. ttach the fix plates.
(1) Stretch the material to the corner and insert the screen material’s edge in the groove of the frame.
While one hand holds the material in place the other hand snaps in the push plate (Fig.4-Fig.5).
(2) Begin by securing the four corners in the following sequence →B→C→D (Fig.6).
(3) Insert the fix the plates as shown on Fig. 5. Fix plate ① is about 10cm away from the frame’s
corner. Fix plate ② is about 5cm away. (Fig.7)
(Fig. 6)
(
Fig.
7
)
Notes
#
• Make note of the label to help distinguish
the back and front side.
• Unroll the screen material face down
• Keep the screen material as close as
possible to the frame and do not allow it
to scratch against any part of the frame.
(Fig. 4) Insert push plate in
Screen material edge
(Fig. 5)
Schematic cross section
of the
f
rame
Plate
Frame groove
B
C
D
(Fig.3)

  ! 
http://www.elitescreens.com
10
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens ustralia
(4) Place a fix plate in the center of each side in the following orderE→F→G→H.(Fig.9)
(5) Next, fasten a fix plate on the center of each frame side in the following order I
$
J
$
K
$
L
$
M
$
N
$
O
$
P as shown in Fig.10.
(6) Fasten the remainder of the fix plates in the empty locations in the red markings to complete
attaching the screen material. (Fig.11)
Tip for attaching the last corner (D):
1. Position yourself left of location
%
.
2. Pull the material to the corner of the frame with your hand while your left
hand snaps in the fix plate on location
%
(the third red dot).
3. Then insert and snap in the fix plate on location
&
.
4. Next, moveand position yourself on location
'(
then pull the edge to
the frame and fasten plates on locations
'
and
)
.
*
+
,
-
.
Pull
(Fig. 8)
E
G
H
F
(Fig.9)
(Fig.10)
I
J
K
L
M
N
O
P

  ! 
http://www.elitescreens.com
11
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens ustralia
Black backing for cousticPro models
This procedure only applies to cousticPro models. Disregard this section if your Fixed Frame does not
include an acoustically transparent screen material. The purpose of the black backing material is to block
out any light penetration that may reflect off of anything mounted behind the screen, which can cause
distortion to the projected image.
(Fig.11)
The black backing is held in place by the Velcro that is on the fix plates.
Interval markings reveal the best points for inserting the fix plates (Fig. 12).
The prongs on the fix plates insert to the lip on the back of the frame
creating a friction hold that will firmly keep the material and black backing
in place (Fig. 13-14). fter the material has been installed, the backing will
lay over the back of the white ( coustic) material and then be held in place
by the Velcro on the fix plates(Fig 15).
(Fig. 12) (Fig. 14) (Fig. 13) (Fig. 15)
Black backing Fix plates secure the coustic material and the black backing behind it.

  ! 
http://www.elitescreens.com
12
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens ustralia
4.5 Center Support Bar
1 Insert the support joiner (j) into each end of the center support bar (i).
support joiner
Center support bar
2 Insert the Center Support Bar into the upper top groove on the back of the frame (not the one where
the fix plate inserts) with the bottom end near the approximate center point of the frame and rotate it
in at an angle so that both ends of the bar are in alignment with the groove (see Fig. 16and Fig.
17below for details).
Diagonal models 135” and below use 1 x Center Support Bar
Diagonal models above 135” require 2x Center Support Bars
Screen material
Center Support Bar
(Fig. 16)
Fixed plate groove
(do not insert here)
Remove
push
Center Support Bar
(Fig. 17)

  ! 
http://www.elitescreens.com
13
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens ustralia
3 Slide the top end of the bar into the top center point of the frame to complete the center support bar
installation. This will provide added stability to your frame and added tension to the material.
4.6 Installation
1 Locate your desired installation location with a stud finder (recommended) and mark the drill-hole
area of where the screen is to be installed.
2 Drill a hole with the proper bit size according to the wood screws included.
3 Line up the wall brackets with the drilled holes on the installation location and screw them in using a
Phillips screwdriver. Note: Use 2 top wall brackets on diagonal sizes below 135”, and use 3 top wall
brackets on diagonal sizes 135” and above.
4 Position the fixed frame screen onto the top wall brackets as shown in (Fig. 18) and push down at the
center of the bottom frame to secure the installation.
5 The design of the wall brackets allows the frame to slide over them through its sides. This is an
important feature of the installation design as it allows your screen to be properly centered.
6 Using both hands finish the installation by pushing the lower portion of the fixed frame screen into
the lower bracket as shown in Fig 19.
C UTION
Please follow these instructions carefully to ensure proper maintenance and safety of your Fixed Frame Screen.
1. When hanging the screen up, please make sure that no other objects such as power switches, outlets,
furniture, ladders, windows, etc. occupy the space designated for your Fixed-Frame screen.
2. Regardless if the screen is hung on or installed into the wall, make sure that the proper mounting
anchors are used and that the weight is supported appropriately by a strong and structurally sound
surface just as any large and heavy picture frame should.
(Fig. 18) (Fig.19)

  ! 
http://www.elitescreens.com
14
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens ustralia
(Please consult a home improvement specialist for the best advice on installation)
3. Frame parts are made of high quality velour-surfaced aluminum and should be handled with care.
4. When not in use, cover over the screen with a furniture sheet to protect it from dirt, grime, paint or
any other impurities.
5. When cleaning, use a damp soft cloth with warm water to remove any marks on the frame or screen
surface.
6. Never attempt to use any solutions, chemicals or abrasive cleaners on the screen surface.
7. In order to avoid damaging the screen, avoid touching it directly with your fingers, tools or any other
sharp or abrasive objects.
8. Spare Parts should be placed out of reach of small children in accordance with household safety
guidelines.
Section 5: Product Specification
5.1 Dimensions
Model
Number
Diag. Size
spect
Ratio
Overall W.
( )
View W.
( 1)
Overall H.
(B)
View H.
(B1)
Frame W.
(C)
Frame Depth
(D)
Unit: Inches
R84WH2
84"
16:9
78.0
73.3
46.1
41.4
2.4
1.6
R100H2
100"
16:9
91.7
87.0
53.5
48.8
2.4
1.6
R100WH2
100"
16:9
91.7
87.0
53.5
48.8
2.4
1.6
R106WH2
106"
16:9
96.9
92.2
56.7
52.0
2.4
1.6
R110WH2
110"
16:9
100.6
95.9
58.7
53.9
2.4
1.6
R120H2
120"
16:9
109.4
104.7
63.4
58.7
2.4
1.6
R120WH2
120"
16:9
109.4
104.7
63.4
58.7
2.4
1.6
R135H2
135"
16:9
122.4
117.7
70.9
66.1
2.4
1.6
R135WH2
135"
16:9
122.4
117.7
70.9
66.1
2.4
1.6
R150WH2
150"
16:9
135.5
130.7
78.4
73.6
2.4
1.6
R165WH2
165"
16:9
148.5
143.8
85.6
80.9
2.4
1.6
R180WH2
180"
16:9
161.6
156.9
92.9
88.2
2.4
1.6
R200WH2
200"
16:9
177.9
173.1
102.8
98.0
2.4
1.6
R109WX2
109"
16:10
96.7
92.0
62.2
57.5
2.4
1.6
R114WX2
114"
16:10
100.7
96.0
64.7
60.0
2.4
1.6
R125WX2
125"
16:10
110.7
106.0
70.9
66.2
2.4
1.6
R144WX2
144"
16:10
126.9
122.1
81.1
76.3
2.4
1.6
Unit: mm
R84WH2
84"
16:9
1981
1862
1171
1052
61
41
R100H2
100"
16:9
2329
2210
1359
1240
61
41
R100WH2
100"
16:9
2329
2210
1359
1240
61
41
R106WH2
106"
16:9
2461
2342
1440
1321
61
41
R110WH2
110"
16:9
2555
2436
1491
1369
61
41

  ! 
http://www.elitescreens.com
15
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens ustralia
Model
Number
Diag. Size
spect
Ratio
Overall W.
( )
View W.
( 1)
Overall H.
(B)
View H.
(B1)
Frame W.
(C)
Frame Depth
(D)
R120H2
120"
16:9
2779
2659
1610
1491
61
41
R120WH2
120"
16:9
2779
2659
1610
1491
61
41
R135H2
135"
16:9
3109
2990
1801
1679
61
41
R135WH2
135"
16:9
3109
2990
1801
1679
61
41
R150WH2
150"
16:9
3442
3320
1991
1869
61
41
R165WH2
165"
16:9
3772
3653
2174
2055
61
41
R180WH2
180"
16:9
4105
3985
2360
2240
61
41
R200WH2
200"
16:9
4519
4397
2611
2489
61
41
R109WX2
109"
16:10
2456
2337
1580
1461
61
41
R114WX2
114"
16:10
2558
2438
1643
1524
61
41
R125WX2
125"
16:10
2812
2692
1802
1682
60
40
R144WX2
144"
16:10
3222
3102
2059
1939
60
40
5.2 Drawings

  ! 
http://www.elitescreens.com
16
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens ustralia
5.3 Pictures
ezFrame Series – Full View with installation kit
Life Style

  ! 
http://www.elitescreens.com
17
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens ustralia
Restaurant Setting

  ! 
http://www.elitescreens.com
18
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens ustralia
Section 6: bout Elite Screens
6.1 Company Description
Elite Screens Inc. is a California based company that specializes in making quality commercial and
home-theater projection screens for the retail and custom install sales channels. Our company
began as an innovative venture into the projection market by manufacturing veterans from the
V/IT industry. Elite Screens quickly established itself as an entry level commercial and home
theater screen manufacturer. This was accomplished by making a quality product cost effective
with a focus on mass-producing screen material, sizes and aspect ratios that were most commonly
preferred by V customers in general. We focused on uniformity with what would match the
mainstream demographic while including extra features that are not usually included by other
manufacturers. In time, we progressed from just retail sales into the realm of custom
installer/integrator manufacture as our numerous reviews and awards will attest. We stand behind
our product and are so certain of customer satisfaction with the quality of our product that we
offer a 2-year manufacturer's warranty which is twice the industry standard. In our continued
devotion to excellence in products and service, we are committed to implementing green practices
with our production. We have adopted manufacturing methods that promote conservative
regulation of our energy needs. Our simple product designs combined with the expertise of our
permanent staff ensures that our entire line of products are made by experienced hands devoted
to the high standards of today’s audio-video consumer.
###
Gathering Room