elsner elektronik KNX S-B4T-UP 230 V Instruction manual

Actuators
KNX S-B4T-UP 230 V and
KNX S-B4T-UP 24 V
Technical Data
and Installation Notes
Elsner Elektronik GmbH Steuerungs- und Automatisierungstechnik
Herdweg 7 • D-75391 Gechingen • Germany
Phone: [phone] • Fax: [phone]
[email protected] • www.elsner-elektronik.de

Actuator KNX S-B4T-UP • Date of issue: 02 July 2009 • Technical changes reserved. Errors reserved.
2
The Actuator KNX S-B4T-UP controls shadings (blinds, awnings, roller shutters) or
windows. The automatic for this may be provided externally or internally. An internal
automatic offers numerous options for blocking, locking (e. g. master–slave) and priority
settings (e. g. manual–automatic). Scenes may be stored and recalled via the bus.
Four binary inputs may be used for direct operation (e. g. manual push-buttons) or as
bus inputs. There is an additional input for a temperature sensor.
Functions:
•For drive mechanism of shading or window
•4 binary inputs
•1 temperature sensor input
•8 channel scene control for operating position (for blinds also slat position)
•Slat tracking for blinds according to the position of the sun
•Position memory (operating position) with a 1 bit object (Storage and recall e. g.
with push-button)
•Position feedback (operating position, for blinds also slat position)
•Control by internal or external automatic
•Setting of the priority of manual or automatic control by time or via
communication object
•Mutual locking of two drives by means of zero position sensors avoids collisions
e. g. of shading and window (master–slave)
•Blocking objects and alarm messages have different priority so that safety
functions always are higher-ranking (e. g. wind blocking)
Configuration is accomplished by means of the KNX software ETS. The programme
file (format VD2) and the manual are ready for download on the Elsner Elektronik
website under www.elsner-elektronik.de in the menu "Service".
Technical Data
Housing: Plastic material
Colour: White
Mounting: In-wall (in socket Ø 60 mm, 60 mm deep)
Protection category: IP 20
Dimensions: approx. 50 x 51 x 41 (W x H x T, mm)
Weight: 230 V version: approx. 90 g
24 V version: approx. 70 g
Ambient temperature: Operation -20…+70°C, Storage -30…+85°C
Ambient air humidity: 5…80% R. H., avoid condensation
Operating voltage: Available for 230 V AC or for 24 V DC
Current: At the bus: 10 mA
At 24 V DC: 40 mA
At 230 V AC: 2 mA AC

Actuator KNX S-B4T-UP • Date of issue: 02 July 2009 • Technical changes reserved. Errors reserved. 3
Output: 1 x Drive mechanism
230 V version: max. 500 W, fused with microfuse T6.3 A
24 V version: max. 50 W
Inputs: 4 x Binary input (for potential-free contacts)
1 x Temperature sensor input (for T-KTY82)
Data output: KNX +/- bus terminal plug
BCU type: Own micro controller
PEI type: 0
Group addresses: max. 200
Allocations: max. 200
Communication objects: 125
The following standards have been considered for the evaluation of the product in
terms of electro magnetic compatibility:
Transient emissions:
•EN 60730-1:2000 Section EMV (23, 26, H23, H26) (threshold category: B)
•EN 50090-2-2:1996-11 + A1:2002-01 (threshold category: B)
•EN 61000-6-3:2001 (threshold category: B)
Interference resistance:
•EN 60730-1:2000 Section EMV (23, 26, H23, H26)
•EN 50090-2-2:1996-11 + A1:2002-01
•EN 61000-6-1:2004
The product has been tested for the above mentioned standards by an accredited EMV
laboratory.

Actuator KNX S-B4T-UP • Date of issue: 02 July 2009 • Technical changes reserved. Errors reserved.
4
Structure of actuator KNX S-B4T-UP 230 V AC
Fig. 1: Front side of KNX S-B4T-UP 230 V
1 Connecting plug terminal binary
inputs and temperature sensor
2 Programming LED
3 Programming key (PRG)
4 Inscription space
5 KNX plug terminal +/-
Fig. 2: Rear side of KNX S-B4T-UP 230 V
1 Connecting plug terminal for
voltage supply and drive mechanism
2 Microfuse T6,3 A

Actuator KNX S-B4T-UP • Date of issue: 02 July 2009 • Technical changes reserved. Errors reserved. 5
Structure of actuator KNX S-B4T-UP 24 V DC
Fig. 3: Front side of KNX S-B4T-UP 24 V
1 Connecting plug terminal binary
inputs and temperature sensor
2 Programming LED
3 Programming key (PRG)
4 Inscription space
5 KNX plug terminal +/-
Fig. 4: Rear side of KNX S-B4T-UP 24 V
1 Connecting plug terminal for
voltage supply and
drive mechanism

Actuator KNX S-B4T-UP • Date of issue: 02 July 2009 • Technical changes reserved. Errors reserved.
6
Installation and Commissioning
Installation, inspection, commissioning and troubleshooting
of the actuators must only be carried out by a competent
electrician.
Disconnect all lines to be assembled, and take safety precautions against accidental
switch-on.
The actuators are exclusively intended for appropriate use. With each inappropriate
change or non-observance of the instructions for use, any warranty or guarantee claim
will be void.
After unpacking the device, check immediately for any mechanical damages. In case of
transport damage, this must immediately notified to the supplier.
If damaged, the actuators must not be put into
operation.
If an operation without risk may supposedly not be guaranteed, the device must be put
out of operation and be secured against accidental operation.
The actators must only be operated as stationary system, i.e. only in a fitted state and
after completion of all installation and start-up works, and only in the environment
intended for this purpose.
Elsner Elektronik does not assume any liability for changes in standards after
publication of this instruction manual.
Connection
The actuators are installed in a flush-type socket. The connection is accomplished by a
KNX connection clamp at the KNX data bus. Furthermore, a voltage supply (230 V AC or
24 V DC, depending on the version) is necessary. The physical address is allocated by
the KNX software. For this purpose, the actuator is provided with a programming key
with control LED.
Notes on installation
Never expose actuators to water (rain) or dust. This might damage the electronic
system. A relative air humidity of 95% must not be exceeded. Avoid bedewing.