elsner elektronik KNX S1R-BA4-UP Guide

KNX S1R-BA4-UP 24 V
Actuator for a 12-24 V DC motor
Item number 70516
EN
Installation and Adjustment

1 Contents
Elsner Elektronik GmbH • Sohlengrund 16 • 75395 Ostelsheim • Germany
Actuator KNX S1R-BA4-UP 24 V • from software version 4.00, ETS programme version 4.0
Status: 27.05.2020 • Subject to technical changes. Errors excepted.
1. Description ........................................................................................... 3
1.0.1. Scope of delivery .......................................................................................... 3
1.1. Technical specification ............................................................................................. 4
2. Installation and commissioning ........................................................... 5
2.1. Installation notes ...................................................................................................... 5
2.2. Safety notice for automatic functions .................................................................... 5
2.3. Installation ................................................................................................................ 6
2.4. Connection ................................................................................................................ 7
2.4.1. Connection examples ................................................................................... 8
2.5. Instructions for assembly and initial start-up ........................................................ 9
3. Addressing of the device at the bus .................................................... 9
4. Disposal ............................................................................................... 9
5. Transfer protocol ............................................................................... 10
5.1. List of all communication objects ......................................................................... 10
6. Parameter setting .............................................................................. 20
6.1. General settings ..................................................................................................... 20
6.2. Output ..................................................................................................................... 20
6.2.1. Channel settings – drives ........................................................................... 21
6.2.1.1. Control (drives) ............................................................................ 23
6.2.1.2. Manual ........................................................................................... 30
6.2.1.3. Automation - external .................................................................. 31
6.2.1.4. Automatic - internal for shading (drives) .................................... 31
6.2.1.5. Automatic for windows (drives) .................................................. 36
6.2.1.6. Scenes (drives) .............................................................................. 40
6.2.1.7. Button inputs (drives) ................................................................... 40
6.2.2. Output channel with drive .......................................................................... 46
6.2.3. Connection option for zero position sensors ........................................... 48
6.2.4. Output channel with switch function ........................................................ 50
6.2.5. Channel settings – switch functions .......................................................... 51
6.2.5.1. Connection (switch functions) ..................................................... 51
6.2.5.2. On/Off switch delays, time switching (switch functions) .......... 52
6.2.5.3. Blocking function (switch functions) ........................................... 53
6.2.5.4. Button input (switch functions) ................................................... 53
6.3. Temperature threshold values .............................................................................. 54
6.3.1. Temperature threshold value 1, 2, 3, 4 ..................................................... 54

2 Clarification of signs
This manual is amended periodically and will be brought into line with new software
releases. The change status (software version and date) can be found in the contents footer.
If you have a device with a later software version, please check
www.elsner-elektronik.de in the menu area "Service" to find out whether a more up-to-
date version of the manual is available.
Clarification of signs used in this manual
Installation, inspection, commissioning and troubleshooting of the device
must only be carried out by a competent electrician.
Safety advice.
Safety advice for working on electrical connections, components,
etc.
DANGER! ... indicates an immediately hazardous situation which will lead to
death or severe injuries if it is not avoided.
WARNING! ... indicates a potentially hazardous situation which may lead to
death or severe injuries if it is not avoided.
CAUTION! ... indicates a potentially hazardous situation which may lead to
trivial or minor injuries if it is not avoided.
ATTENTION! ... indicates a situation which may lead to damage to property if it is
not avoided.
ETS In the ETS tables, the parameter default settings are marked by
underlining.

3 Description
Actuator KNX S1R-BA4-UP 24 V • Version: 27.05.2020 • from software version 4.00, ETS programme version 4.0 •
Technical changes and errors excepted.
1. Description
The Actuator KNX S1R-BA4-UP 24 V with integrated façade controller regulates
the 12 or 24 V DC motor for a shutter, an awning, a blind or window. Because the out-
put is designed to be potential-free, other systems can also be controlled, e.g. via the
manual switch input on a motor control unit.
Automation is specified externally or internally. Internally, there are numerous options
available for blocking, locking (e.g. master-slave) and priority definitions (e.g. manual-
automatic). Scenes are saved and called up via the bus (scene control with 16 scenes
per drive).
The KNX S1R-BA4-UP 24 V has four inputs that are used as binary inputs (switches,
alarm messages etc.) or as analogue inputs for T-NTC temperature sensors.
Functions:
•Potential-free output with polarity changer for a 12 V DC or 24 V DC drive
(shade, window)
•4 inputs for binary contacts or temperature sensor
•Automatic runtime measurement of the drives for positioning (incl. fault
reporting object)
•Position feedback (movement position, also slat position for shutters)
•Position storage (movement position) via 1-bit object (storage and call-up
e.g. via buttons)
• Parameters for taking drive and mechanics downtimes into account
•Controlviainternal or external automation functions
•Integratedshade control with slat tracking according to sun position for
shutters
•Scene control for movement position with 16 scenes per drive (also slat
position for shutters)
• Mutual locking of two drives using zero position sensors prevents collisions
e.g. of shade and window (master–slave)
•Blocking objects and alarm reports have different priorities, so safety
functions always take precedence (e.g. wind block)
• Manual or automatic priority setting via time or communication object
•4 temperature switching outputs in the application program with
adjustable threshold values (presetting the parameters or communication
object)
•Brief time limit (movement command blocked) and 2 movement limits
Configuration is made using the KNX software ETS 5. The product file can be down-
loaded from the ETS online catalogue and the Elsner Elektronik website on www.els-
ner-elektronik.de in the “Service” menu.
1.0.1. Scope of delivery
•Actuator

4 Description
Actuator KNX S1R-BA4-UP 24 V • Version: 27.05.2020 • from software version 4.00, ETS programme version 4.0 •
Technical changes and errors excepted.
1.1. Technical specification
Housing Plastic
Colour White
Assembly Flush mounting (in junction box Ø 60 mm, 60 mm deep)
Protection category IP 20
Dimensions approx. 50 x 50 x 54 (W × H × D, mm)
Weight approx. 100 g
Ambient temperature Operation -20…+45°C, storage -30…+85°C
Ambient humidity 5...80% RH, non-condensing
Operating voltage KNX bus voltage
Power on bus: 10 mA
at 12/24 V DC: typically 5 mA, max. 10 mA
Maximum load Each terminal contact may be loaded with a maximum
of 10 A.
Output 1 × Output potential-free with polarity changer
for 1 drive or 2 electrical loads
(Connections + | - | Motor 1 | Motor 2)
Power supply 12-24 V DC for connected
Motor/consumer required
(via connections + | -).
Load capacity: max. 5 A with resistive load
Starting current: max. 5 A
Minimum current for runt-
ime measurement
DC effektive 100 mA
Inputs 4× analogue/ digital, max. cable length 10 m.
Setting range for the T-NTC
temperature sensor at the
input
-30°C...+80°C
Data output KNX +/- bus plug-in terminals
BCU type Integrated microcontroller
PEI type 0
Group addresses max. 1024
Assignments max. 1024
Communication objects 200

5 Installation and commissioning
Actuator KNX S1R-BA4-UP 24 V • Version: 27.05.2020 • from software version 4.00, ETS programme version 4.0 •
Technical changes and errors excepted.
The product is compliant with the provisions of EU guidelines.
2. Installation and commissioning
2.1. Installation notes
Installation, testing, operational start-up and troubleshooting should
only be performed by an electrician.
CAUTION!
Live voltage!
There are unprotected live components inside the device.
• National legal regulations are to be followed.
• Ensure that all lines to be assembled are free of voltage and take
precautions against accidental switching on.
• Do not use the device if it is damaged.
• Take the device or system out of service and secure it against
unintentional use, if it can be assumed, that risk-free operation is
no longer guaranteed.
The device is only to be used for the intended purpose described in this manual. Any
improper modification or failure to follow the operating instructions voids any and all
warranty and guarantee claims.
After unpacking the device, check it immediately for possible mechanical damage. If it
has been damaged in transport, inform the supplier immediately.
The device may only be used as a fixed-site installation; that means only when assem-
bled and after conclusion of all installation and operational start-up tasks and only in
the surroundings designated for it.
Elsner Elektronik is not liable for any changes in norms and standards which may occur
after publication of these operating instructions.
2.2. Safety notice for automatic functions
WARNING!
Risk of injury from automatically moving components!
Parts of the system can be started by the automatic controls
and be a danger to persons.
• No persons may remain in the travelling range of parts
driven by an electric motor.
• Adhere to the relevant building regulations.

6 Installation and commissioning
Actuator KNX S1R-BA4-UP 24 V • Version: 27.05.2020 • from software version 4.00, ETS programme version 4.0 •
Technical changes and errors excepted.
• Ensure that the return path/access to the building is not blocked
if spending time outside the building (danger of being locked out).
• Correctly decommission the system for maintenance and
cleaning work.
If there is a power outage, the system does not work. Therefore, shadings should be
moved to a save position if there are anticipated weather conditions, for example, if
this has not already been done by the automatic function (product protection).
If the power supply is removed, the connected drive switches off. When the power is
restored, the consumer remains switched off until a new movement command is re-
ceived by the actuator.
2.3. Installation
Fig. 1: Bus side
1 Connector analogue/digital inputs
2 Label field
3 KNX plug terminal +/-
4 Programming LED and programming
button (countersunk)
1
2
3
4
Analogue/digital inputs connector assignment:
1: GND | 2: IN1 | 3: GND | 4: IN2 | 5: GND | 6: IN3 | 7: GND | 8: IN4
All GND connectors are internally bridged.

7 Installation and commissioning
Actuator KNX S1R-BA4-UP 24 V • Version: 27.05.2020 • from software version 4.00, ETS programme version 4.0 •
Technical changes and errors excepted.
2.4. Connection
The Actuator KNX S1R-BA4-UP 24 V is installed in a flush-mounted socket. The
connection is made using a KNX connector on the KNX data bus. In addition, a power
supply for the connected drive is necessary (potential-free output).
Follow the guidelines and standards for SELV electric circuits
while installing and cable laying of the KNX connection and
inputs!
ATTENTION!
When first switched on, relays may be live!
The bistable relays used in this product can switch themselves on
when subjected to strong vibration, e.g. during transport.
• First of all connect the bus voltage; this will switch off the relays.
Only then can the power supply for the drive be switched on.
The physical address is assigned by the KNX software. There is a button with a control
LED for this on the actuator.
Fig. 2: Output side
1 Connector for 12 V DC or 24 V DC motor
(free of potential)
1

8 Installation and commissioning
Actuator KNX S1R-BA4-UP 24 V • Version: 27.05.2020 • from software version 4.00, ETS programme version 4.0 •
Technical changes and errors excepted.
2.4.1. Connection examples
Inputs:
Drive 12 to 24 V DC at the out-
put:
2 consumers 12 to 24 V DC at the out-
put:
Each terminal contact may be loaded with a maximum of 10 A.
Fig. 3
Example KNX S1R-B4-UP with
binary contact on input 1 and
T-NTC temperature sensor on input 4.
Connection of the temperature sensor is in-
dependent of the polarity.

9 Addressing of the device at the bus
Actuator KNX S1R-BA4-UP 24 V • Version: 27.05.2020 • from software version 4.00, ETS programme version 4.0 •
Technical changes and errors excepted.
2.5. Instructions for assembly and initial start-up
Never expose the actuator to water (e.g. rain) or dust. This can damage the electronics.
You must not exceed a relative air humidity of 80%. Avoid condensation.
After the auxiliary voltage has been applied, the device will enter an initialisation phase
lasting a few seconds. During this phase no information can be received or sent via the
bus.
For KNX devices with safety functions (e.g. wind or rain blocks), it is important to set
up periodical monitoring of the safety objects. The ideal ratio is 1:3 (example: if the
weather station sends a value every 5 minutes, the actuator must be configured for a
monitoring period of 15 minutes).
3. Addressing of the device at the bus
The device is supplied with the bus address 15.15.255. You can program another ad-
dress into the ETS by overwriting the 15.15.255 address or by teaching via the pro-
gramming button.
4. Disposal
After use, the device must be disposed of or recycled in accordance with the legal reg-
ulations. Do not dispose of it with the household waste!

10 Transfer protocol
Actuator KNX S1R-BA4-UP 24 V • Version: 27.05.2020 • Technical changes and errors excepted.
5. Transfer protocol
5.1. List of all communication objects
Abbreviations:
R Read
WWrite
C Communication
T Transfer
No Text Function Flags Data Point Type Size
1 Software version Readable R-C- [217.1]
DPT_Version
2 Bytes
100 Channel A - Automatic or
manual status
Output R-CT [1]
1.xxx
1 Bit
101 Channel A - Manual
extended
Input RWC- [1.8]
DPT_UpDown
1 Bit
102 Channel A - Manual brief Input RWC- [1.8]
DPT_UpDown
1 Bit
103 Channel A - Manual
movement position
Input RWC- [5.1]
DPT_Scaling
1 Byte
104 Channel A - Manual slat
position
Input RWC- [5.1]
DPT_Scaling
1 Byte
105 Channel A - Automatic
extended
Input RWC- [1.8]
DPT_UpDown
1 Bit
106 Channel A - Automatic brief Input RWC- [1.8]
DPT_UpDown
1 Bit
107 Channel A - Automatic
movement position
Input RWC- [5.1]
DPT_Scaling
1 Byte
108 Channel A - Automatic slat
position
Input RWC- [5.1]
DPT_Scaling
1 Byte
109 Channel A - Switch from
manual to automatic
Input RWC- [1]
1.xxx
1 Bit
110 Channel A - Automatic
blocking object
Input RWC- [1.1]
DPT_Switch
1 Bit
111 Channel A - Current
movement position
Output R-CT [5.1]
DPT_Scaling
1 Byte
112 Channel A - Current slat
position
Output R-CT [5.1]
DPT_Scaling
1 Byte
113 Channel A - Status object Output R-CT [1]
1.xxx
1 Bit
114 Channel A - Approach
position memory for
manual
Input LSK- [1.1]
DPT_Switch
1 Bit

11 Transfer protocol
Actuator KNX S1R-BA4-UP 24 V • Version: 27.05.2020 • Technical changes and errors excepted.
115 Channel A - Learn object
position memory for
automatic 0
Input RWC- [1.1]
DPT_Switch
1 Bit
116 Channel A - Learn object
position memory for
automatic 1
Input RWC- [1.1]
DPT_Switch
1 Bit
119 Channel A - Approach
position memory
automatically
Input RWC- [1.1]
DPT_Switch
1 Bit
120 Channel A - Learn object
position memory
automatically
Input RWC- [1.1]
DPT_Switch
1 Bit
121 Channel A - Learn object
position memory for
automatic 1
Input RWC- [1.1]
DPT_Switch
1 Bit
124 Channel A - Call up / saving
scenes
Input RWC- [18.1]
DPT_SceneControl
1 Byte
125 Channel A - Outdoor
temperature blocking object
Input RWC- [1.1]
DPT_Switch
1 Bit
126 Channel A - Outdoor
temperature blocking
measurement value
Input RWC- [9.1]
DPT_Value_Temp
2 Bytes
127 Channel A - Outdoor
temperature blocking status
Output R-CT [1.1]
DPT_Switch
1 Bit
128 Channel A - Twilight object Input RWC- [1.1]
DPT_Switch
1 Bit
129 Channel A - Twilight
measurement value
Input RWC- [9.4]
DPT_Value_Lux
2 Bytes
130 Channel A - Twilight status Output R-CT [1.1]
DPT_Switch
1 Bit
131 Channel A - Time control Input RWC- [1.1]
DPT_Switch
1 Bit
132 Channel A - Inside
temperature release object
Input RWC- [1.1]
DPT_Switch
1 Bit
133 Channel A - Inside
temperature release
measurement value
Input RWC- [9.1]
DPT_Value_Temp
2 Bytes
134 Channel A - Inside
temperature release target
value
Input RWC- [9.1]
DPT_Value_Temp
2 Bytes
135 Channel A - Inside
temperature release status
Output R-CT [1.1]
DPT_Switch
1 Bit
136 Channel A - Shading object Input RWC- [1.1]
DPT_Switch
1 Bit
No Text Function Flags Data Point Type Size

12 Transfer protocol
Actuator KNX S1R-BA4-UP 24 V • Version: 27.05.2020 • Technical changes and errors excepted.
137 Channel A - Shading
brightness measurement
value 1
Input RWC- [9.4]
DPT_Value_Lux
2 Bytes
138 Channel A - Shading
brightness measurement
value 2
Input RWC- [9.4]
DPT_Value_Lux
2 Bytes
139 Channel A - Shading
brightness measurement
value 3
Input RWC- [9.4]
DPT_Value_Lux
2 Bytes
140 Channel A - Shading
threshold value
Input /
Output
RWCT [9.4]
DPT_Value_Lux
2 Bytes
141 Channel A - Shading
threshold value 1 = + | 0 = -
Input RWC- [1]
1.xxx
1 Bit
142 Channel A - Shading
threshold value +
Input RWC- [1]
1.xxx
1 Bit
143 Channel A - Shading
threshold value -
Input RWC- [1]
1.xxx
1 Bit
144 Channel A - Shading status Output R-CT [1.1]
DPT_Switch
1 Bit
145 Channel A - Shading
position learning object
Input RWC- [1]
1.xxx
1 Bit
146 Channel A - Azimuth Input RWC- [9]
9.xxx
2 Bytes
147 Channel A - Elevation Input RWC- [9]
9.xxx
2 Bytes
148 Channel A - Cold air intake
blocking object
Input RWC- [1.1]
DPT_Switch
1 Bit
149 Channel A - Cold air intake
outside temp. measurement
value
Input RWC- [9.1]
DPT_Value_Temp
2 Bytes
150 Channel A - Cold air intake
blocking status
Output R-CT [1.1]
DPT_Switch
1 Bit
151 Channel A - Forced
ventilation
Input RWC- [1.1]
DPT_Switch
1 Bit
152 Channel A - Warm air intake
blocking object
Input RWC- [1.1]
DPT_Switch
1 Bit
153 Channel A - Warm air intake
inside temp. measurement
value
Input RWC- [9.1]
DPT_Value_Temp
2 Bytes
154 Channel A - Warm air intake
outside temp. measurement
value
Input RWC- [9.1]
DPT_Value_Temp
2 Bytes
155 Channel A - Warm air intake
blocking target value
Input RWC- [9.1]
DPT_Value_Temp
2 Bytes
No Text Function Flags Data Point Type Size

13 Transfer protocol
Actuator KNX S1R-BA4-UP 24 V • Version: 27.05.2020 • Technical changes and errors excepted.
156 Channel A - Warm air intake
blocking status
Output R-CT [1.1]
DPT_Switch
1 Bit
157 Channel A - Inside
temperature opening object
Input RWC- [1.1]
DPT_Switch
1 Bit
158 Channel A - Inside temp.
opening measurement
value
Input RWC- [9.1]
DPT_Value_Temp
2 Bytes
159 Channel A - Inside temp.
opening target value
Input RWC- [9.1]
DPT_Value_Temp
2 Bytes
160 Channel A - Inside temp.
opening threshold value
Input /
Output
RWCT [9.1]
DPT_Value_Temp
2 Bytes
161 Channel A - Inside temp.
open threshold value 1 = +
Input RWC- [1]
1.xxx
1 Bit
162 Channel A - Inside temp.
opening threshold value +
Input RWC- [1]
1.xxx
1 Bit
163 Channel A - Inside temp.
opening threshold value -
Input RWC- [1]
1.xxx
1 Bit
164 Channel A - Inside temp.
opening object
Output R-CT [1.1]
DPT_Switch
1 Bit
165 Channel A - Inside humidity
opening object
Input RWC- [1.1]
DPT_Switch
1 Bit
166 Channel A - Inside humidity
opening measurement
value
Input RWC- [9.7]
DPT_Value_Humidity
2 Bytes
167 Channel A - Inside humidity
opening status
Output R-CT [1.1]
DPT_Switch
1 Bit
170 Channel A - Zero position
reached
Input RWC- [1.1]
DPT_Switch
1 Bit
171 Channel A - Zero position
sensor disrupted
Output R-CT [1.1]
DPT_Switch
1 Bit
172 Channel A - Master zero
position status
Output R-CT [1.1]
DPT_Switch
1 Bit
173 Channel A - Master zero
position command
Output R-CT [1.1]
DPT_Switch
1 Bit
174 Channel A - Slave zero
position status
Input RWC- [1.1]
DPT_Switch
1 Bit
175 Channel A - Master zero
position status
Input RWC- [1.1]
DPT_Switch
1 Bit
176 Channel A - Master zero
position command
Input RWC- [1.1]
DPT_Switch
1 Bit
177 Channel A - Slave zero
position status
Output R-CT [1.1]
DPT_Switch
1 Bit
178 Channel A - Drive is moving Output R-CT [1]
1.xxx
1 Bit
No Text Function Flags Data Point Type Size

14 Transfer protocol
Actuator KNX S1R-BA4-UP 24 V • Version: 27.05.2020 • Technical changes and errors excepted.
179 Channel A - Object
malfunction
Output R-CT [1]
1.xxx
1 Bit
180 Channel A - Blocking 1 -
Blocking object
Input RWC- [1.1]
DPT_Switch
1 Bit
181 Channel A - Blocking 1 -
Wind blocking object
Input RWC- [1.1]
DPT_Switch
1 Bit
182 Channel A - Blocking 1 -
Wind blocking
measurement value
Input RWC- [9.5]
DPT_Value_Wsp
2 Bytes
183 Channel A - Blocking 1 -
Wind blocking status
Output R-CT [1.1]
DPT_Switch
1 Bit
184 Channel A - Blocking 1 -
Rain blocking object
Input RWC- [1.1]
DPT_Switch
1 Bit
185 Channel A - Blocking 2 -
Blocking object
Input RWC- [1.1]
DPT_Switch
1 Bit
186 Channel A - Blocking 2 -
Wind blocking object
Input RWC- [1.1]
DPT_Switch
1 Bit
187 Channel A - Blocking 2 -
Wind blocking
measurement value
Input RWC- [9.5]
DPT_Value_Wsp
2 Bytes
188 Channel A - Blocking 2 -
Wind blocking status
Output R-CT [1.1]
DPT_Switch
1 Bit
189 Channel A - Blocking 2 -
Rain blocking object
Input RWC- [1.1]
DPT_Switch
1 Bit
190 Channel A - Blocking 3 -
Blocking object
Input RWC- [1.1]
DPT_Switch
1 Bit
191 Channel A - Blocking 3 -
Wind blocking object
Input RWC- [1.1]
DPT_Switch
1 Bit
192 Channel A - Blocking 3 -
Wind blocking
measurement value
Input RWC- [9.5]
DPT_Value_Wsp
2 Bytes
193 Channel A - Blocking 3 -
Wind blocking status
Output R-CT [1.1]
DPT_Switch
1 Bit
194 Channel A - Blocking 3 -
Rain blocking object
Input RWC- [1.1]
DPT_Switch
1 Bit
195 Channel A - Blocking 4 -
Blocking object
Input RWC- [1.1]
DPT_Switch
1 Bit
196 Channel A - Blocking 4 -
Wind blocking object
Input RWC- [1.1]
DPT_Switch
1 Bit
197 Channel A - Blocking 4 -
Wind blocking
measurement value
Input RWC- [9.5]
DPT_Value_Wsp
2 Bytes
198 Channel A - Blocking 4 -
Wind blocking status
Output R-CT [1.1]
DPT_Switch
1 Bit
No Text Function Flags Data Point Type Size

15 Transfer protocol
Actuator KNX S1R-BA4-UP 24 V • Version: 27.05.2020 • Technical changes and errors excepted.
199 Channel A - Blocking 4 -
Rain blocking object
Input RWC- [1.1]
DPT_Switch
1 Bit
200 Channel A - Blocking 5 -
Blocking object
Input RWC- [1.1]
DPT_Switch
1 Bit
201 Channel A - Blocking 5 -
Wind blocking object
Input RWC- [1.1]
DPT_Switch
1 Bit
202 Channel A - Blocking 5 -
Wind blocking
measurement value
Input RWC- [9.5]
DPT_Value_Wsp
2 Bytes
203 Channel A - Blocking 5 -
Wind blocking status
Output R-CT [1.1]
DPT_Switch
1 Bit
204 Channel A - Blocking 5 -
Rain blocking object
Input RWC- [1.1]
DPT_Switch
1 Bit
205 Channel A - Movement
limitation 1 - Blocking
object
Input RWC- [1.1]
DPT_Switch
1 Bit
206 Channel A - Movement
limitation 2 - Blocking
object
Input RWC- [1.1]
DPT_Switch
1 Bit
207 Channel A - Short time
restriction
Input RWC- [1.1]
DPT_Switch
1 Bit
210 Channel A1 - Switching Input RWC- [1.1]
DPT_Switch
1 Bit
211 Channel A1 - Feedback Output R-CT [1.1]
DPT_Switch
1 Bit
212 Channel1 A1 - Status Readable R-C- [1.1]
DPT_Switch
1 Bit
213 Channel A1 - Blocking
object
Input RWC- [1.1]
DPT_Switch
1 Bit
215 Channel A1 - Start staircase
light function
Input -WC- [1.10]
DPT_Start
1 Bit
216 Channel A1 - Start/stop
staircase light function
Input RWC- [1.10]
DPT_Start
1 Bit
217 Channel A1 - Linking Input RWC- [1.2]
DPT_Bool
1 Bit
218 Channel A - Call up / saving
scenes
Input RWC- [18.1]
DPT_SceneControl
1 Byte
220 Channel A2 - Switching Input RWC- [1.1]
DPT_Switch
1 Bit
221 Channel A2 - Feedback Output R-CT [1.1]
DPT_Switch
1 Bit
222 Channel A2 - Status Readable R-C- [1.1]
DPT_Switch
1 Bit
223 Channel A2 - Blocking
object
Input RWC- [1.1]
DPT_Switch
1 Bit
No Text Function Flags Data Point Type Size

16 Transfer protocol
Actuator KNX S1R-BA4-UP 24 V • Version: 27.05.2020 • Technical changes and errors excepted.
225 Channel A2 - Start staircase
light function
Input -WC- [1.10]
DPT_Start
1 Bit
226 Channel A2 - Start/stop
staircase light function
Input RWC- [1.10]
DPT_Start
1 Bit
227 Channel A2 - Linking Input RWC- [1.2]
DPT_Bool
1 Bit
249 Channel A - Local operation Input [1.10]
DPT_Start
1 Bit
250 Input 1 - Extended Input /
Output
RWCT [1.8]
DPT_UpDown
1 Bit
251 Input 1 - Short Output R-CT [1.8] DPT_UpDown 1 Bit
252 Input 1 - Switching Input /
Output
RWCT [1.1]
DPT_Switch
1 Bit
253 Input 1 - Relative dimming Input /
Output
RWCT [3.7]
DPT_Control_Dimmin
g
4 Bit
254 Input 1 - 8-bit encoder Output R-CT [5]
5.xxx
1 Byte
255 Input 1 - Temperature
encoder
Output R-CT [9.1]
DPT_Value_Temp
2 Bytes
256 Input 1 - Brightness encoder Output R-CT [9.4]
DPT_Value_Lux
2 Bytes
257 Input 1 - Scene Output R-CT [18.1]
DPT_SceneControl
1 Byte
258 Input 1 - Blocking object Input RWC- [1.1]
DPT_Switch
1 Bit
260 Input 1 - Temperature
sensor, malfunction
Output --CT [1.1]
DPT_Switch
1 Bit
261 Input 1 - Temperature
sensor, total value
Output R-CT [9.1]
DPT_Value_Temp
2 Bytes
262 Input 1 - Temperature
sensor, measured outside
value
Input -WC- [9.1]
DPT_Value_Temp
2 Bytes
263 Input 1 - Temperature
sensor, measured value
Output R-CT [9.1]
DPT_Value_Temp
2 Bytes
270 Input 2 - Extended Input /
Output
RWCT [1.8]
DPT_UpDown
1 Bit
271 Input 2 - Short Output R-CT [1.8]
DPT_UpDown
1 Bit
272 Input 2 - Switching Input /
Output
RWCT [1.1]
DPT_Switch
1 Bit
273 Input 2 - Relative dimming Input /
Output
RWCT [3.7]
DPT_Control_Dimmin
g
4 Bit
No Text Function Flags Data Point Type Size

17 Transfer protocol
Actuator KNX S1R-BA4-UP 24 V • Version: 27.05.2020 • Technical changes and errors excepted.
274 Input 2 - 8-bit encoder Output R-CT [5]
5.xxx
1 Byte
275 Input 2 - Temperature
encoder
Output R-CT [9.1]
DPT_Value_Temp
2 Bytes
276 Input 2 - Brightness encoder Output R-CT [9.4] DPT_Value_Lux 2 Bytes
277 Input 2 - Scene Output R-CT [18.1]
DPT_SceneControl
1 Byte
278 Input 2 - Blocking object Input RWC- [1.1]
DPT_Switch
1 Bit
280 Input 2 - Temperature
sensor, malfunction
Output --CT [1.1]
DPT_Switch
1 Bit
281 Input 2 - Temperature
sensor, total value
Output R-CT [9.1]
DPT_Value_Temp
2 Bytes
282 Input 2 - Temperature
sensor, measured outside
value
Input -WC- [9.1]
DPT_Value_Temp
2 Bytes
283 Input 2 - Temperature
sensor, measured value
Output R-CT [9.1]
DPT_Value_Temp
2 Bytes
300 Input 3 - Temperature
sensor, malfunction
Output --CT [1.1] DPT_Switch 1 Bit
301 Input 3 - Temperature
sensor, total value
Output R-CT [9.1]
DPT_Value_Temp
2 Bytes
302 Input 3 - Temperature
sensor, measured outside
value
Input -WC- [9.1]
DPT_Value_Temp
2 Bytes
303 Input 3 - Temperature
sensor, measured value
Output R-CT [9.1]
DPT_Value_Temp
2 Bytes
320 Input 4 - Temperature
sensor, malfunction
Output --CT [1.1]
DPT_Switch
1 Bit
321 Input 4 - Temperature
sensor, total value
Output R-CT [9.1]
DPT_Value_Temp
2 Bytes
322 Input 4 - Temperature
sensor, measured outside
value
Input -WC- [9.1]
DPT_Value_Temp
2 Bytes
323 Input 4 - Temperature
sensor measured value
Output R-CT [9.1]
DPT_Value_Temp
2 Bytes
450 Input 3 - Extended Input /
Output
RWCT [1.8]
DPT_UpDown
1 Bit
451 Input 3 - Short Output R-CT [1.8]
DPT_UpDown
1 Bit
452 Input 3 - Switching Input /
Output
RWCT [1.1]
DPT_Switch
1 Bit
453 Input 3 - Relative dimming Input /
Output
RWCT [3.7]
DPT_Control_Dimmin
g
4 Bit
No Text Function Flags Data Point Type Size

18 Transfer protocol
Actuator KNX S1R-BA4-UP 24 V • Version: 27.05.2020 • Technical changes and errors excepted.
454 Input 3 - 8-bit encoder Output R-CT [5]
5.xxx
1 Byte
454 Input 3 - Temperature
encoder
Output R-CT [9.1]
DPT_Value_Temp
2 Bytes
456 Input 3 - Brightness encoder Output R-CT [9.4]
DPT_Value_Lux
2 Bytes
457 Input 3 - Scene Output R-CT [18.1]
DPT_SceneControl
1 Byte
458 Input 3 - Blocking object Input RWC- [1.1]
DPT_Switch
1 Bit
470 Input 4 - Extended Input /
Output
RWCT [1.8]
DPT_UpDown
1 Bit
471 Input 4 - Short Output R-CT [1.8]
DPT_UpDown
1 Bit
472 Input 4 - Switching Input /
Output
RWCT [1.1]
DPT_Switch
1 Bit
473 Input 4 - Relative dimming Input /
Output
RWCT [3.7]
DPT_Control_Dimmin
g
4 Bit
474 Input 4 - 8-bit encoder Output R-CT [5]
5.xxx
1 Byte
475 Input 4 - Temperature
encoder
Output R-CT [9.1]
DPT_Value_Temp
2 Bytes
476 Input 4 - Brightness encoder Output R-CT [9.4]
DPT_Value_Lux
2 Bytes
477 Input 4 - Scene Output R-CT [18.1]
DPT_SceneControl
1 Byte
478 Input 4 - Blocking object Input RWC- [1.1]
DPT_Switch
1 Bit
500 Temp. threshold value 1:
Measured value
Input -WC- [9.1]
DPT_Value_Temp
2 Bytes
501 Temp. threshold value 1:
Absolute value
Input /
Output
RWCT [9.1]
DPT_Value_Temp
2 Bytes
502 Temp. threshold value 1:
(1:+ | 0:-)
Input -WC- [1.1]
DPT_Switch
1 Bit
503 Temp. threshold value 1:
Switching delay from 0 to 1
Input -WC- [7]
7.xxx
2 Bytes
504 Temp. threshold value 1:
Switching delay from 1 to 0
Input -WC- [7]
7.xxx
2 Bytes
505 Temp. threshold value 1:
Switching output
Output R-CT [1.1]
DPT_Switch
1 Bit
506 Temp. threshold value 1:
Switching output block
Input -WC- [1.1]
DPT_Switch
1 Bit
No Text Function Flags Data Point Type Size