elsner elektronik KNX S1R-B4 compact Guide

EN
Installation and Adjustment
KNX S1R-B4 compact
Multifunctional Actuator
Item number 70550

1 Contents
Elsner Elektronik GmbH • Sohlengrund 16 • 75395 Ostelsheim • Germany
Actuator KNX S1R-B4 compact • from application 1.0
Status: 12.09.2022 • Subject to technical changes. Errors excepted.
1. Safety and usage instructions ............................................................. 3
1.1. Safety notice for automatic functions .................................................................... 3
2. Description ........................................................................................... 4
3. Commissioning .................................................................................... 4
3.1. Addressing of the device at the bus ....................................................................... 5
3.2. Monitor safety functions .......................................................................................... 5
4. Transfer protocol ................................................................................. 6
4.1. List of all communication objects ........................................................................... 6
5. Parameter setting .............................................................................. 14
5.1. General settings ..................................................................................................... 14
5.2. Output ..................................................................................................................... 14
5.2.1. Channel settings – drives ........................................................................... 15
5.2.1.1. Control (drives) ............................................................................ 17
5.2.1.2. Manual ........................................................................................... 25
5.2.1.3. Automation - external .................................................................. 25
5.2.1.4. Automatic - internal for shading (drives) .................................... 26
5.2.1.5. Automatic for windows (drives) .................................................. 31
5.2.1.6. Scenes (drives) .............................................................................. 35
5.2.1.7. Button inputs (drives) ................................................................... 35
5.2.2. Connection option for zero position sensors ........................................... 42
5.2.3. Channel settings – switch functions .......................................................... 44
5.2.3.1. Connection (switch functions) ..................................................... 45
5.2.3.2. On/Off switch delays, time switching (switch functions) .......... 45
5.2.3.3. Blocking function (switch functions) ........................................... 46
5.2.3.4. Button input (switch functions) ................................................... 46

2 Clarification of signs
This manual is amended periodically and will be brought into line with new software
releases. The change status (software version and date) can be found in the contents footer.
If you have a device with a later software version, please check
www.elsner-elektronik.de in the menu area "Service" to find out whether a more up-to-
date version of the manual is available.
Clarification of signs used in this manual
Safety advice.
Safety advice for working on electrical connections, components,
etc.
DANGER! ... indicates an immediately hazardous situation which will lead to
death or severe injuries if it is not avoided.
WARNING! ... indicates a potentially hazardous situation which may lead to
death or severe injuries if it is not avoided.
CAUTION! ... indicates a potentially hazardous situation which may lead to
trivial or minor injuries if it is not avoided.
ATTENTION! ... indicates a situation which may lead to damage to property if it is
not avoided.
ETS In the ETS tables, the parameter default settings are marked by
underlining.

3 Safety and usage instructions
Actuator KNX S1R-B4 compact • Version: 12.09.2022 • Technical changes and errors excepted.
1. Safety and usage instructions
Installation, testing, operational start-up and troubleshooting should
only be performed by an authorised electrician.
DANGER!
Risk to life from live voltage (mains voltage)!
There are unprotected live components inside the device.
• Inspect the device for damage before installation. Only put undamaged
devices into operation.
• Comply with the locally applicable directives, regulations and provisions for
electrical installation.
• Immediately take the device or system out of service and secure it against
unintentional switch-on if risk-free operation is no longer guaranteed.
Use the device exclusively for building automation and observe the operating instruc-
tions. Improper use, modifications to the device or failure to observe the operating in-
structions will invalidate any warranty or guarantee claims.
Operate the device only as a fixed-site installation, i.e. only in assembled condition and
after conclusion of all installation and operational start-up tasks, and only in the sur-
roundings designated for it.
Elsner Elektronik is not liable for any changes in norms and standards which may occur
after publication of these operating instructions.
1.1. Safety notice for automatic functions
WARNING!
Risk of injury from automatically moving components!
Parts of the system can be started by the automatic controls
and be a danger to persons.
• No persons may remain in the travelling range of parts
driven by an electric motor.
• Adhere to the relevant building regulations.
• Ensure that the return path/access to the building is not blocked
if spending time outside the building (danger of being locked out).
• Correctly decommission the system for maintenance and
cleaning work.
If there is a power outage, the system does not work. Therefore, shadings should be
moved to a save position if there are anticipated weather conditions, for example, if
this has not already been done by the automatic function (product protection).
If the power supply is removed, the connected drive switches off. When the power is
restored, the consumer remains switched off until a new movement command is re-
ceived by the actuator.

4 Description
Actuator KNX S1R-B4 compact • Version: 12.09.2022 • Technical changes and errors excepted.
For information on installation, maintenance, disposal, scope of
delivery and technical data, please refer to the installation
instructions.
2. Description
The Actuator KNX S1R-B4 compact with integrated façade control has got a mul-
tifunctional output which can connect to either a drive with Up/Down control (blind,
awning, shutter, window) or two switchable devices (On/Off for light and ventilation).
Because the output is designed to be free of potential, other systems can also be con-
trolled, e.g. via the manual switch input on a motor control unit.
Automation can be specified externally or internally. Internally, there are numerous op-
tions available for blocking, locking (e.g. master-slave) and priority definitions (e.g.
manual-automatic). Scenes can be saved and called up via the bus (scene control with
16 scenes).
4 digital inputs are available for the connection of contacts like push-buttons.
Functions:
• Free of potential multifunctional output for a 230 V drive (shading,
window) or connection of two switchable devices (light, fan)
•4 binary inputs
•Position feedback (movement position, also slat position for shutters)
•Position storage (movement position) via 1-bit object (storage and call-up
e.g. via buttons)
• Parameters for taking drive and mechanics downtimes into account
• Control via internal or external automation functions
•Integratedshade control with slat adjustment for shutters based on the
position of the sun
•Scene control for movement position with 16 scenes (also slat position for
shutters)
• Mutual locking of two drives using zero position sensors prevents collisions
e.g. of shade and window (master–slave)
•Blocking objects and alarm reports have different priorities, so safety
functions always take precedence (e.g. wind block)
• Manual or automatic priority setting via time or communication object
•Brief time limit (movement command blocked) and 2 movement limits
3. Commissioning
Configuration is made using the KNX software as of ETS 5. The product file can be
downloaded from the ETS online catalogue and the Elsner Elektronik website on
www.elsner-elektronik.de in the “Service” menu.
After the bus voltage has been applied, the device will enter an initialisation phase last-
ing approx. 5 seconds. During this phase no information can be received or sent via the
bus.

5 Commissioning
Actuator KNX S1R-B4 compact • Version: 12.09.2022 • Technical changes and errors excepted.
3.1. Addressing of the device at the bus
The equipment is delivered with the individual address 15.15.255. This can be changed
via the ETS. A button and a control LED are located on the unit for this purpose.
3.2. Monitor safety functions
For KNX devices with safety functions (e.g. wind or rain block), periodical monitoring
of the safety objects must be set up.
For further explanations of KNX integration, see the manual chapters
Transfer protocol and Setting the parameters.

6 Transfer protocol
Actuator KNX S1R-B4 compact • Version: 12.09.2022 • from application 1.0 • Technical changes and errors excepted.
4. Transfer protocol
4.1. List of all communication objects
Abbreviations:
R Read
WWrite
C Communication
T Transmit
DPT Data Point Type
No Text Function Flags DPT type Size
0 Software version readable R-C- [217.1]
DPT_Version
2 Bytes
1 Channel A - Automatic or
manual status
Output R-CT [1.1] DPT_Switch 1 Bit
2 Channel A - Manual
extended
Input RWC- [1.8] DPT_UpDown 1 Bit
3 Channel A - Manual short
time
Input RWC- [1.8] DPT_UpDown 1 Bit
4 Channel A - Manual
movement position
Input RWC- [5.1] DPT_Scaling 1 Byte
5 Channel A - Manual blind
position
Input RWC- [5.1] DPT_Scaling 1 Byte
6 Channel A - Automatic
extended
Input RWC- [1.8] DPT_UpDown 1 Bit
7 Channel A - Automatic short
time
Input RWC- [1.8] DPT_UpDown 1 Bit
8 Channel A - Automatic
movement position
Input RWC- [5.1] DPT_Scaling 1 Byte
9 Channel A - Automatic blind
position
Input RWC- [5.1] DPT_Scaling 1 Byte
10 Channel A - Switch from
manual to automatic
Input RWC- [1.1] DPT_Switch 1 Bit
11 Channel A - Automatic
blocking object
Input RWC- [1.1] DPT_Switch 1 Bit
12 Channel A - Current
movement position
Output R-CT [5.1] DPT_Scaling 1 Byte
13 Channel A - Current blind
position
Output R-CT [5.1] DPT_Scaling 1 Byte
14 Channel A - Status object Output R-CT [1.1] DPT_Switch 1 Bit
15 Channel A - Manually move
to position memory
Input RWC- [1.1] DPT_Switch 1 Bit

7 Transfer protocol
Actuator KNX S1R-B4 compact • Version: 12.09.2022 • from application 1.0 • Technical changes and errors excepted.
16 Channel A - Learn object
position memory manually
0
Input RWC- [1.1] DPT_Switch 1 Bit
17 Channel A - Learn object
position memory manually
1
Input RWC- [1.1] DPT_Switch 1 Bit
18 Channel A - Automatically
move to position memory
Input RWC- [1.1] DPT_Switch 1 Bit
19 Channel A - Learn object
position memory
automatically 0
Input RWC- [1.1] DPT_Switch 1 Bit
20 Channel A - Learn object
position memory
automatically 1
Input RWC- [1.1] DPT_Switch 1 Bit
21 Channel A - Call up / saving
scenes
Input RWC- [18.1]
DPT_SceneControl
1 Byte
22 Channel A - Outdoor
temperature blocking object
Input RWC- [1.1] DPT_Switch 1 Bit
23 Channel A - Outdoor
temperature block
measurement
Input RWC- [9.1]
DPT_Value_Temp
2 Bytes
24 Channel A - Outdoor
temperature blocking status
Output R-CT [1.1] DPT_Switch 1 Bit
25 Channel A - Twilight object Input RWC- [1.1] DPT_Switch 1 Bit
26 Channel A - Twilight
measurement
Input RWC- [9.4]
DPT_Value_Lux
2 Bytes
27 Channel A - Twilight status Output R-CT [1.1] DPT_Switch 1 Bit
28 Channel A - Time control Input RWC- [1.1] DPT_Switch 1 Bit
29 Channel A - Inside
temperature release object
Input RWC- [1.1] DPT_Switch 1 Bit
30 Channel A - Inside
temperature release
measurement
Input RWC- [9.1]
DPT_Value_Temp
2 Bytes
31 Channel A - Inside
temperature release
setpoint
Input RWC- [9.1]
DPT_Value_Temp
2 Bytes
32 Channel A - Inside
temperature release status
Output R-CT [1.1] DPT_Switch 1 Bit
33 Channel A - Shading object Input RWC- [1.1] DPT_Switch 1 Bit
34 Channel A - Shading
brightness measurement 1
Input RWC- [9.4]
DPT_Value_Lux
2 Bytes
35 Channel A - Shading
brightness measurement 2
Input RWC- [9.4]
DPT_Value_Lux
2 Bytes
36 Channel A - Shading
brightness measurement 3
Input RWC- [9.4]
DPT_Value_Lux
2 Bytes
No Text Function Flags DPT type Size

8 Transfer protocol
Actuator KNX S1R-B4 compact • Version: 12.09.2022 • from application 1.0 • Technical changes and errors excepted.
37 Channel A - Shading
threshold value
Input /
Output
RWCT [9.4]
DPT_Value_Lux
2 Bytes
38 Channel A - Shading
threshold value 1 = + | 0 = -
Input RWC- [1.1] DPT_Switch 1 Bit
39 Channel A - Shading
threshold value +
Input RWC- [1.1] DPT_Switch 1 Bit
40 Channel A - Shading
threshold value -
Input RWC- [1.1] DPT_Switch 1 Bit
41 Channel A - Shading status Output R-CT [1.1] DPT_Switch 1 Bit
42 Channel A - Shading
position learning object
Input RWC- [1.1] DPT_Switch 1 Bit
43 Channel A - Azimuth Input RWC- [9.7] DPT_Value_
Humidity
2 Bytes
44 Channel A - Elevation Input RWC- [9.7] DPT_Value_
Humidity
2 Bytes
45 Channel A - Cold air intake
blocking object
Input RWC- [1.1] DPT_Switch 1 Bit
46 Channel A - Cold air intake
outside temp. measurement
value
Input RWC- [9.1]
DPT_Value_Temp
2 Bytes
47 Channel A - Cold air intake
blocking status
Output R-CT [1.1] DPT_Switch 1 Bit
48 Channel A - Forced
ventilation
Input RWC- [1.1] DPT_Switch 1 Bit
49 Channel A - Warm air intake
blocking object
Input RWC- [1.1] DPT_Switch 1 Bit
50 Channel A - Warm air intake
inside temp. measurement
value
Input RWC- [9.1]
DPT_Value_Temp
2 Bytes
51 Channel A - Warm air intake
outside temp. measurement
value
Input RWC- [9.1]
DPT_Value_Temp
2 Bytes
52 Channel A - Warm air intake
blocking target value
Input RWC- [9.1]
DPT_Value_Temp
2 Bytes
53 Channel A - Warm air intake
blocking status
Output R-CT [1.1] DPT_Switch 1 Bit
54 Channel A - Inside
temperature opening object
Input RWC- [1.1] DPT_Switch 1 Bit
55 Channel A - Inside
temperature opening
measurement
Input RWC- [9.1]
DPT_Value_Temp
2 Bytes
56 Channel A - Inside
temperature opening
setpoint
Input RWC- [9.1]
DPT_Value_Temp
2 Bytes
No Text Function Flags DPT type Size