ENABLE-IT, INC. LIMITED WARRANTY
Enable-IT, Inc. warrants the Enable-IT 360 PoE Injector solely pursuant to the following terms and
conditions.
1.ENABLE-IT PRODUCT WARRANTY.
a. Express Warranty.
Enable-IT warrants to the original purchaser of the Product ("you" or the "End User") that, !
forthefour(4)yearperiodcommencingonthedatetheProductwaspurchased(the
"WarrantyPeriod"),theProductwillbesubstantiallyfreefromdefectsinmaterialsand
workmanshipundernormaluseandconditions.ThiswarrantydoesnotapplytoProducts,
whichareresoldasused,repairedorreconditioned,orconsumables(suchasbatteries)
suppliedwiththeProduct.Electrical or water damage are not covered under this
warranty,extendedwarrantiesorAdvancedReplacementProgram(AREP).
!
Enable-IT does not make any warranty with respect to any third party product, software or
accessorysuppliedwithorusedinconnectionwiththeProductandsuchthirdparty
products,softwareandaccessories,ifany,areprovided"ASIS."Warrantyclaimsrelatedto
suchthirdpartyproducts,softwareandaccessoriesmustbemadetotheapplicablethird
partymanufacturer.
b. Remedies for Breach of Warranty.
In the event of a breach of the foregoing warranty, Enable-IT will, in its sole discretion and at
its cost, and subject to the terms of the following paragraph, repair the non-conforming
Product, replace the non-conforming Product with a new or reconditioned Product or refund
the purchase price for the Product. Any new or reconditioned Product provided pursuant to
this paragraph is warranted as provided herein for the remainder of the original Warranty
Period. THE REMEDY SET FORTH IN THIS PARAGRAPH SHALL BE THE END USER’S
SOLE AND EXCLUSIVE REMEDY FOR BREACH OF THE FOREGOING WARRANTY.
c. Conditions for Warranty Qualification.
If authorized by Enable-IT to return a Product which does not conform to the warranty set
forth above, the End User must: (1) obtain a return materials authorization (RMA) number
from Enable-IT by contacting the Customer Service Dept. at 888-309-0910 between the
hours of 8:00 a.m. and 5:00 p.m. PST and otherwise fully comply with Enable-IT’s then-
current RMA policy; (2) return the Product to Enable-IT in its original packaging freight pre-
paid; and (3) provide to Enable-IT the original receipt or bill of sale establishing the date on
which the Product was purchased. Products returned to Enable-IT without an RMA number
will be returned to the End User. Enable-IT shall not be responsible for damage or loss
during shipment of the returned Product to Enable-IT.
d. Voiding of Warranty.
The express warranty set forth above shall not apply to failure of the Product if the Product
has been subjected to: (i) physical abuse, misuse, improper installation, abnormal use,
power failure or surge, or use not consistent with the operating instructions provided by
Enable-IT; (ii) modification (including but not limited to opening the Product housing) or repair
by any party in any manner other than as approved by Enable-IT in writing; (iii) fraud,
tampering, unusual physical or electrical stress, unsuitable operating or physical conditions,
negligence or accidents; (iv) removal or alteration of the Product serial number tag; (v)
improper packaging of Product returns; or (vi) damage during shipment (other than during
the original shipment of the Product to the End User from Enable-IT, if applicable).
