Epson 500DN - B Color Inkjet Printer User manual

B-500DN
Network Installation Guide
Guide d'installation réseau

3
Installing the B-500 on Your Network
Follow these instructions to install the software and connect the B-500DN to
your network.
First, make sure you install the ink cartridges and load paper as described on the
Start Here sheet that came with the printer. Then follow the steps below for
Windows®or on page 8 for Macintosh®.
Windows Network Connection
The software works with Windows 2000, Server 2003, XP, XP Professional x64
Edition, and Windows Vista®. Before you begin, make sure you have a standard
RJ-45 network cable (not included).
1. Turn off the printer.
2. Connect one end of the cable to the printer's Ethernet port. Then connect
the other end to your network switch or hub.
3. Turn on the printer.
4. Insert your printer CD.
With Windows Vista, if you see the AutoPlay window, click Run
Epsetup.exe. When you see the User Account Control screen, click
Continue.
English

4
5. Click Easy Install.
6. Click Network, then click Install on the next screen.
Note:
If you see a Windows Security Alert, click Unblock.

5
7. When you see the following screen, select the B-500DN and click Next.
8. If you see the following screen, select Automatic. If you need to set the IP
address manually, select Manual and enter the address. Then click Next and
follow the instructions on the screen.

6
9. Enter a different name for the printer if you want, then click Next.
10. Follow the instructions on the screen to complete the installation.
11. When you see a screen like this, click Finish.

7
12. Click Exit and skip to step 13. Or, if you need to manage your network,
click Back to return to the Easy Install screen.
13. Select Install Network Utility.

8
14. Select and install each item.
15. When you’re done, remove the CD and restart your computer.
Repeat steps 4 to 15 for every Windows computer on the network that will print
to the B-500DN.
Macintosh Network Connection
Your software works with Mac OS®X 10.3.9, 10.4.11, and 10.5.x. Before you
begin, make sure you have a standard RJ-45 network cable (not included).
1. Turn off the printer.
2. Connect one end of the cable to the printer’s Ethernet port. Then connect
the other end to your network switch or hub.

9
3. Turn on the printer.
4. Insert the printer software CD-ROM.
5. Double-click the Mac OS X installer icon.
6. Click Easy Install.
7. Click Network, then click Install on the next screen.

10
8. When you see the following screen, select the B-500DN and click Next.
9. When you see this screen, click No. If
you need to change any settings, click
Yes, then follow the on-screen
instructions.
10. Follow the instructions on the screen to complete the installation.