Ercol CHESHAM HIGHBOARD User manual

Assemblyinstructions
Your guide to producing the instruction leaflet

CHESHAM HIGHBOARD
186-497-018
Assembly instructions
H150xW34.5xD104cm
Actual product size
Need Help?
With: Assembly instructions
Missing or damaged parts
CALL: 0333 777 8999IMPORTANT ─RETAIN FOR FUTURE REFERENCE
186-497-018
Produced in China for Next Retail Ltd.

CHESHAM HIGHBOARD
186-497-018
Assembly instructions
186-497-018
Produced in China for Next Retail Ltd.
BEFORE YOU START
not supplied
PH2
not supplied
To View our full furniture range please visit www.next.co.uk
You can write to us at
Home service technicians
If you have a fault with your product please contact our
customer service team on 0333 777 8999. If you have had the
product for 28 days or less you may be offered a replacement,
refund or for a fully trained home service technician to visit you
home to assess the fault and repair the product where possible
If you have had the product for more than 28 days we will send
an independant home service technician to review and repair
the product where possible and recommend further action.
Missing parts
If you are missing any fixtures and fittings for your product
please contact our customer service team on 0333 777 8999
and they will be happy to arrange for a replacement to be sent
to you free of charge.
Tools required
Time to assemble wall fixing
Number of people required to assemble
One person are required to assemble this item.
Don’ts
Do not drag or pull your furniture.
Do not use silicone based furniture polish. Silicone in furniture
polishes can break down the finish.
Never allow any kind of liquid to remain on your furniture.
Absorption can cause wood to warp or finishes to de-laminate.
Do not place hot items (e.g. hot drinks) directly on to the wood
surface. Please make sure you use a placement or coaster.
Warnings
We suggest you retain these instructions for future reference.
Keep fittings out of children’s reach and keep children well
away from the construction area.
This product should only be used on firm, level ground.
Please periodically check all fittings and re-tighten as
necessary.
Please do not sit or stand on your furniture.
Avoid exposing the furniture to excessive heat or direct
sunlight as this can cause deterioration of the colour.
Unwrap all packaging materials and place the components
on top of the carton box or on a clean floor to protect it from
damage.
Do’s
We suggest you spend a short time reading through this leaflet
before you start.
When you are ready to start, make sure that you have the
right tools and plenty of space.
Unwrap all packaging materials and place the components
on a clean surface to protect it from damage.
We recommend that the packaging is used to protect the
surfaces during assembly.
Carefully check that you have all the parts before beginning
assembly
Due to the size of the product we recommend that it is
assembled in the room intended for use.
Ensure the product is fully assembled as illustrated and all
fixings are fully tightened before use.
Wipe occasionally with a soft cloth slightly dampened with
water. Then buff with a dry clean soft cloth.
Wood will mellow and change colour over time, we recommend
that ornaments and items placed on the surface are moved
regularly for the first few months to prevent uneven mellowing.
Home Customer Services
Next Retail Ltd,
Desford Road,
Leicester,
LE19 4AT

CHESHAM HIGHBOARD
186-497-018
Assembly instructions
186-497-018
Produced in China for Next Retail Ltd.
Fittings and parts checklist
Wood
If fixing to wood
make sure that it
isn’t chipboard as
screws can easily pull
away from the core
structure
Brick or Masonry
Use an appropriate
wall plug provided you
are sure your wall is
sound
Cavity wall
Special toggle
wall plugs are
needed. Seek
expert advice
A 16mm Screws x 2 C Brackets x 2
B Wedges x 2 D Strap x 1
1
2
3
4wall
chest
1. See fig 1 below. Screw one of the brackets on to the back of the chest in the middle, using the short
screws provided. Make sure the TOP OF THE BRACKET IS BELOW the top of the chest. Position the
chest against the wall where you want it to go, place the second bracket onto the wall below the one
fixed to the chest and mark where the holes come on the wall. Move the chest away from the wall.
2. Attach the wall bracket using screws suitable for your type of wall, see Wall fixings above.
3. Place the chest back against the wall so the two brackets match up and tie them together with
the plastic strap provided .The plates need not match exactly, but the plastic tie must go through
each plate. Close the strap, but do not over tighten it.