Ercol 2361 Pero User manual

2361 Pero Tall Shelving Unit
Thank you for purchasing this shelving unit. Please read the instructions carefully before use to ensure safe and
satisfactory operation of this product. Installation shall be carried out exactly according to the manufacturers
instructions, otherwise a safety risk can occur if incorrectly installed.
WARNING: In order to prevent overturning this product must be used with the wall attachment device provided.
Pre-assembly preparation
Please ensure instructions are read in full before attempting to assemble this product
Necessary Tools
Please check the pack contents before attempting to assemble this product.A full checklist of
components is given in this leaflet. If any components are missing, please contact the retailer from whom
you bought this product.
This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE
WHEN LIFTING to avoid personal injury and (or) damage to the product.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROMYOUNG
CHILDREN.
ercol

Fittings and parts checklist
AAllen key
BM6 socket screws bolts x20
CU shaped cable clip x10
DM5 50mm screws x2
Step by step assembly instructions
1. Attach the shelves to the uprights as shown in diagram 1, using the 20 M6 bolts supplied

Wood
If fixing to wood
make sure that it
isn’t chipboard as
screws can easily pull
away from the core
structure
Wall fixing - if in doubt seek professional advice
Brick or Masonry
Use an appropriate
wall plug provided you
are sure your wall is
sound
Cavity wall
Special toggle
wall plugs are
needed. Seek
expert advice
Place the shelving unit against the wall in it’s final position and mark the wall where the holes need to be drilled,
see Diagram 2.
Move the unit away from the wall and drill the two holes.
Using fixings appropriate to your type of wall. See diagrams above. Put the shelving unit back against the wall and
fix it to the wall.
2. Attach the unit to the wall using appropriate fittings for your wall
WALL
FRONT
D

General care
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Ercol Furniture Ltd, Summerleys Road, Princes Risborough, Buckinghamshire. HP27 9PX www.ercol.com
Furniture with a shiny surface should also be dusted with a soft cloth. Polish the surfaces using only natural bees
wax a maximum of twice a year.
Spray polishes should not be used as they contain silicones which may spoil the furniture’s surface by building up
over time. Use of cleaning materials containing abrasive compounds, acidic or caustic reagents and any bleaches
containing oxidising reagents should be avoided as prolonged use may damage
General care the lacquered surface.
This furniture will endure most temperatures in the home but it is best to avoid placing furniture next to heat
sources such as radiators or fires. Be particularly careful with solid wood as the lack of humidity caused by central
heating can cause damage such as warping.
All timber surfaces will change colour and mellow over time. New furniture will initially vary in shade from items
that have been previously purchased.
Warning
This unit is heavy use an assistant when lifting.
Please use the u clips to attach any electrical flexes you may have to keep them tidy. See the diagram below for
location of these clips into the ends of the shelves.
BACK
VIEW
B
C