Ercol Winslow 4171/455 User manual

ercol Winslow Kingsize Bedstead
Stock Number: 4171/455
H107 W165 D218cm Ref: 00455 / 4171

Thank you for purchasing the ercol Winslow Kingsize Bedstead. Please read the instructions and warnings carefully
before use, to ensure safe and satisfactory operation of this product.
We are committed to making great products possible.
From our in-house Design Team, to our Buyers, we work together to bring great design to life.
Our expert Product Technologists work collaboratively with our buyers and suppliers to assure the legality, safety
and quality of the product we sell.
We are all committed to designing and developing products to the highest industry standarts.
We hope you are happy with your ercol product and welcome any feedback or comments you may have.
2
Time to assemble
1 hour
People to assemble
Tools Required

3
Important safety information
Warnings
The product should only be used on firm, level ground.
Keep small parts ot of reach of children.
Ensure the product is fully assembled as illustrated before use.
Do's
Check the pack and make sure you have all the parts listed.
Check all screws or bolts are tightened and inspect regularly.
Make sure the legs remain in contact with the ground at all times.
Dont's
Do not over tighten screws or bolts.
Do not stand on the product.
Don not use power tools to construct as overtightening and panel failure may occur.

Ref Description Qty
Headboard 1
Footboard 1
L/H Side Rail 1
R/H Side Rail 1
Centre Rail 1
Bed Slats 38
Dimensions
1070mm x 1508mm x 186mm
405mm x 1455mm x 50mm
159mm x 1941mm x 30mm
159mm x 1941mm x 30mm
90mm x 1884mm x 72mm
1
1
2
2
3
4
5
6
6
3
4
5
6
4
Your Bed
I
nternal dimensions
S
tock number: 4171/455
Overall size
: H107 W165 D218cm

5
Fixtures and fittings
Fixtures and fittings
supplied (actual size)
Ref
A
Description Dimensions Qty
8x67mm 8 Headless Bolts
Fixtures and fittings
supplied (not actual size)
Ref Description Dimensions Qty
F1
Wrench
8
B8
Fixing Head
C8
Hex Nut
D10mm x 35mm 8
Wooden Dowel
E
27mm x 30mm x 58mm
M13
76
Slat Holders

1
2
4
3
D
D
D
D
D
D
D
D
D
6
Product Assembly
Winslow Kingsize Bedstead
4171
A 1 2
Step 1
Parts, fittings and tools
A
Step 2
Parts, fittings and tools
D 3 4
Screw 8x headless bolts (A) to the headboard (1) and the footboard (2).
Place 8x wooden dowels (D) to the side rails (3 / 4) as shown below.
Use a soft hammer to fix the dowels in place.
A
A
A
A
A
A
A
A
D
A
A

1
3
4
2
7
Winslow Kingsize Bedstead
4171
Step 3
Parts, fittings and tools
Step 4
Parts, fittings and tools
B C F1 3 4
B C F2
Place 4x fixing heads (B) into the slots on the side rail (3 / 4). Attach the
side panels (3 / 4) to the headboard (1) as shown below. Then fix the 4x
hex nuts (C) by using a wrench (F).
Place 4x fixing heads (B) into the slots on the side rail (3 / 4). Attach the
side panels (3 / 4) to the footboard (2) as shown below. Then fix the 4x
hex nuts (C) by using a wrench (F).
C
B
F
C
B
F
BC
C
C
B
B
C
B
C
C
B
B

5
5
6
6
8
Winslow Kingsize Bedstead
4171
Step 5
Parts, fittings and tools
Step 6
Parts, fittings and tools
5
6 E
Place the center rail (5) on the metal attachment pieces as shown below.
Place 76x slat holders (E) to both ends of the bed slats (5). Attach 38x
bed slats (5) to the center rail and the side rails by pushing the slat
holders (E) downwards.
E
E
6
If any slats are splintered, then please do
not use. Leave a space near the top of
the bed and order a replacement from us
directly using the stock number on the
front of this instruction
ATTENTION

9
Care and maintenance
Wood Furniture
Wood displays different grain patterns depending on which way it is cut - for example, the ‘medullary ray’
which can appear on oak furniture is a mark of good quality timber - these are just characteristics of the
natural beauty of the wood. Some furniture is also deliberately aged and rustic.
All timber surfaces will change colour and mellow over time. New furniture will initially vary in shade from
items that have been previously purchased.
How to care for your wood furniture
Furniture with hard lacquer, wax polish or painted surface should be dusted with a dry cloth. When using the
surface for serving food and drinks it is best to use protective mats and coasters. Spillages should be wiped up
as soon as possible.
Spray polishes are best avoided as they contain silicones which may spoil the furniture’s surface by building up
over time. Use of cleaning materials containing abrasive compounds, acidic or caustic reagents and any
bleaches containing oxidising reagents should be avoided as prolonged use may damage the lacquer surface.
Wipe up spills immediately. If sticky marks occur on the surface they can be removed with a dilute solution of
warm soapy water. The offending area should be rubbed lightly and then completely dried immediately
afterwards, before replacing any mats etc.
Our furniture will endure most temperatures in the home but it is best to avoid placing furniture next to heat
sources such as radiators or fires. Be particularly careful with solid wood as the lack of humidity caused by
central heating can cause damage such as warping.
Safety Instructions
Never drag furniture when moving it, always lift it. Please take care when handling or moving the furniture as
careless handling may cause damage or injury. No liability will be accepted for damage or injury caused by
incorrectly installed furniture.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Ercol Fu
Tel: [phone] Oꢀce Hours: 9.00 - 5.00
rniture Ltd, Summerleys Road, Princes Risborough, Buckinghamshire. HP27 9PX www.ercol.com
YNG TAL 14 / EOMT8 D: 17.02.2023 / RN 000
ercol