ErgoAV ERMTL1-01B User manual

Model: ERMTL1-01B
TV Wall Mount Instruction Manual
V1.0
English pages 02-14 French pages 15-27 Spanish pages 28-40
THANK YOU FOR CHOOSING THIS ERGOAV PRODUCT!
At ErgoAV, we want to add value to your AV experience by providing the highest
quality products and services in the industry. If you have any concerns or
comments, please contact us.
ErgoAV Customer Care
Phone (877) 419-7832 M-F 8am to 8pm CST
email: [email protected]
website: www.ergoav.com
address: 9501 Louisiana Ave N, #200 Brooklyn Park, MN 55445

Minimum VESA pattern: 200mm/8 in (W)x100mm/4 in (H)
If your TV VESA is greater than 600x400 mm/24x16 in or less than VESA
200x100mm/8x4 in, this mount is NOT compatible.
MAX: 600mm/24 in
MAX: 400mm/16 in
PPLQ
PPLQ
PPLQ
PPLQ
Please carefully read all instructions before attempting installation. If you do not
understand the instructions or have any concerns or questions, please contact our Technical
Support line at (877) 419-7832 or customer service at [email protected].
CAUTION: Use with products heavier than the maximum weights indicated may result in
instability causing possible injury.
• Do not use this product for any purposHWKDWLVQRWH[SOLFLWO\VSHFLHGLQWKLVPDQXDO’R
not exceed weight capacity. We are not liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use.
• This product is designed for use in wood stud, and solid concrete walls. -
DO NOT install
into drywall alone.
• The wall must be capable of supporting four times the weight of the TV and mount
combined.
• Use this mounting system only for its intended use as described in these instructions. Do
not use attachments not recommended by the manufacturer.
• Do not use outdoors.
• Route cords and cables properly to avoid mechanical damage.
• SAVE THESE INSTRUCTIONS.
If this mount is NOT compatible, please contact our Technical Support line at
RUFXVWRPHUVHUYLFHDWVXSSRUW#HUJRDYFRPWRQG DFRPSDWLEOHPRXQW
DO NOT exceed the maximum weight indicated. This mounting
system is intended for use only within the maximum weights
indicated. Use with products heavier than the maximum weights
indicated may result in failure of the mount and its accessories,
causing damage and or injury.
If your TV weighs more,
do not use this product.
115lbs/
52.16kg
WARNING
Weight Restrictions
IMPORTANT SAFETY INFORMATION
Check the VESA Pattern of Your TV before the Installation
02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40

Supplied Parts and Hardware for Step 1
NOTE: The spacers are shown
in actual size.
Spacers
Washer
Supplied Parts and Hardware
Warning: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. Do not use
damaged or defective parts. lf you require replacement parts, please contact our
Technical Support line at (877) 419-7832 or customer service at [email protected]
• Please note: Not all hardware included in this package will be used.
Verify Your Wall Construction
If you are not sure of
the wall construction,
please contact our
Technical Support line
at (877) 419-7832 or
customer service at
Solid Concrete
Wall
CAUTION
DO NOT
install into
drywall alone Wood Studs
(with Drywall)
Right TV Bracket
x1
02
Left TV Bracket
x1
03
Stud Finder Tape Measure Pencil Electric Drill Level
7/32 in (5.5mm)
Wood Drill
1/2 in (13mm)
Socket Wrench
Phillips
Screwdriver
3/8 in (10mm)
Concrete Drill Hammer
Awl
Tools Needed (Not lncluded)
x4
B1
M4/M5
x4
B2
M6/M8
L2.5mm
x8
F1
L10mm
x4
F2
L22mm
x4
F3
02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40

Bolt length: Verify adequate thread engagement with bolts or bolts/spacers
combination. We recommend thread engagement by at least 5 turns.
-Too short will not hold the TV.
-Too long will damage the TV.
Note: Please do not over tighten the TV bolts to avoid damaging your TV.
2QO\RQHEROWVL]HWV\RXU79
Step 1 Secure the TV Brackets to the TV
Select TV Bolts
M6 M8M4
Too short Correct Too long
>2QO\RQHEROWVL]HWV\RXU79@
TV Bolts
NOTE: The bolts are shown in actual size
M4
M6
M8
M4x30mm
x4
C2
M4x12mm
x4
C1
M6x15mm
x4
D1
M8x15mm
x4
E1
M8x35mm
x4
E2
M8x50mm
x4
E3
M6x35mm
x4
D2
OR OR
02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40

CAUTION: When attaching
the TV brackets to the back of
the TV, ensure the Up Arrows
are pointing to the top of the TV
and are equally centered on the
back of the TV.
PLEASE NOTE: The bolt
hole locations on your TV may
vary in accordance of the
manufacturers design of the TV.
We are only illustrating possible
locations of the bolt holes.
03 02
Please Note: When using the spacers it is important to note that they can be used in
PXOWLOD\HUVPHDQLQJVWDFNHG,I\RXKDYHDQ\GLFXOW\XQGHUVWDQGLQJKRZWRLQVWDOO
the TV bolts or spacers, please contact our Technical Support line at (877) 419-7832
or customer service at [email protected].
Bump
See Option C Cables
See Option D Recessed Holes
See Option E
Spacers
Parts Needed if You Have a TV as Shown Below
F1+F1 F1+F2 F1+F3F1+F1+F2 F1+F1+F3 F2+F3 F1+F2+F3 F1+F1+F2+F3
Curved TV
See Option B
03
02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40

Option A (For Flat Back TV)
Option B (For Round Back TV)
03
02
C2/D2/E2/E3
B1/B2
F1/F2/F3
03
02
D
o
n
o
t
o
v
e
r
-
t
i
g
h
t
e
n
Phillips Screwdriver
(Not lncluded)
D
o
n
o
t
o
v
e
r
-
t
i
g
h
t
e
n
NOTE: The UP arrow should
point towards the top of TV.
(If needed)
C1/D1/E1
B1/B2
F1
Refer back to spacer instruc-
tions on page 5, if needed
Refer back to spacer instructions
on page 5, if needed
NOTE: The UP arrow should
point towards the top of TV.
Spacers must be tall enough so that the curve on the back of the TV will not interfere
with the mounting plate.
02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40

6SDFHUVPXVWEHWDOOHQRXJKVR79EUDFNHWVDUHXVK12
GAP) on bump.
Option C (For TV with A “Bump”)
D
o
n
o
t
o
v
e
r
-
t
i
g
h
t
e
n
Option D (for TV with Cable Interference)
03
02
03
Phillips Screwdriver
(Not lncluded)
Phillips Screwdriver
(Not lncluded)
)RUFDEOHLQWHUIHUHQFHXVHVSDFHUV>)@>)@DQG>)@WR
create extra space between the TV and TV brackets.
F1/F2/F3 B1/B2
C2/D2/E2/E3
Refer back to spacer instructions
on page 5, if needed
Refer back to spacer instructions
on page 5, if needed
NOTE: The UP arrow
should point towards
the top of TV.
D
o
n
o
t
o
v
e
r
-
t
i
g
h
t
e
n
C2/D2/E2/E3
B1/B2
F1/F2/F3
02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40

Note: The lag screw is shown in actual size
x4
A1
Lag Screw
5/16X2 3/4 in
Supplied Parts and Hardware for Step 2
D
o
n
o
t
o
v
e
r
-
t
i
g
h
t
e
n
Wall Plate x1
01
Wall Plate Template x1
04
Phillips Screwdriver
(Not lncluded)
Option E (For Recessed Holes
7KHVSDFHUQHHGVWROOLQWKHUHFHVVHGKROHVRQWKH
back of the TV so that the TV Brackets are as close to
the TV as possible.
03
C2/D2/E2/E3
B1/B2
F1/F2/F3
Refer back to spacer instructions
on page 5, if needed
02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40

2A-1
8VHDVWXGQGHUQRWLQFOXGHGWR
locate wood studs or use an awl
(not included) to verify the edges.
Mark the edge and center locations.
Awl
(Not lncluded)
Step 2A Wood Stud Option
Step 2 Attach the Wall Plate [01] to the Wall
For wood stud installation, follow STEP 2A
For concrete installation, follow STEP 2B
Wall
Anchor
X
A2
x4
Wall
Anchor
10X60mm
This anchor is for concrete
walls ONLY. DO NOT use
them in drywall or wood
studs.
CAUTION!
A2
WARNING:
Ensure the wall plate is securely fastened to the wall before
continuing to the next step.
Do not use a drill for tightening the lag screws! Only use a socket wrench.
1RPLQDOZRRGVWXGVL]HFRPPRQ[LQ[PP
6WXGFHQWHUPXVWEHYHULHG
Avoid potential personal injury or property damage! DO NOT over-tighten the lag
VFUHZV>$@7LJKWHQWKHODJVFUHZV>$@RQO\XQWLOWKH\DUHSXOOHGUPO\DJDLQVW
WKHZDOOSODWH>@
DO NOT USE ANCHOR [A2] FOR THIS STEP.
24 in (610mm)
16 in (406mm)
OR
6WXGQGHU
(Not lncluded)
02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40

04
Install the wall plate using lag
VFUHZV>$@7LJKWHQWKHODJ
VFUHZV>$@LVSXOOHGUPO\
against the wall plate. DO NOT
RYHUWLJKWHQWKHODJVFUHZV>$@
1/2 in (13mm)
Socket Wrench
(Not Included)
2A-2
2A-3
Drill pilot holes using a 7/32 in
(5.5mm) diameter drill bit. Make
sure the depth is not less than
2 3/4 in (70mm).
01
2A-4
A1
Note: Do not use a drill to tighten the
lag screws. Only use a socket wrench.
Position the wall plate template
>@ at your desired height and line
up the holes with your stud center
line. Level the wall plate template
>@ and mark the holes.
Level
(Not Included)
Pencil
(Not Included)
Electric Drill
(Not Included)
LQPP
7/32 in
(5.5 mm)
Level
(Not Included)
02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40

Drill 4 pilot holes using a
3/8 in (10mm) diameter drill
bit. Make sure the depth is
not less than 3 in (75mm).
3/8 in (10mm)
3 in (75mm)
Step 2B Solid Concrete Wall Option
Wall
Anchor
A2
Position the wall plate
WHPSODWH>@ at your desired
height. Level the wall plate
WHPSODWH>@ and mark the pilot
hole locations.
2B-1
2B-2
0RXQWWKHZDOOSODWHGLUHFWO\RQWRWKHFRQFUHWHVXUIDFHZLWKRXW
any covering.
7KHWKLFNQHVVRIWKHFRQFUHWHZDOOPXVWH[FHHGLQPP
WARNING:
$YRLGSRWHQWLDOSHUVRQDOLQMXU\RUSURSHUW\GDPDJH’2127RYHUWLJKWHQWKHODJ
VFUHZV>$@7LJKWHQWKHODJVFUHZV>$@LVSXOOHGUPO\DJDLQVWWKHZDOOSODWH
(QVXUHWKHZDOOSODWHLVVHFXUHO\IDVWHQHGWRWKHZDOOEHIRUHFRQWLQX-
ing to the next step.
Do not use a drill for tightening the lag screws! Only use a socket wrench.
Wall Thickness
(140mm)
Electric Drill
(Not Included)
04
Pencil
(Not Included)
Level
(Not Included)
02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40

,QVWDOOWKHZDOOSODWH>@XVLQJODJVFUHZV>$@7LJKWHQWKHODJ
VFUHZV>$@LVSXOOHGUPO\DJDLQVWWKHZDOOSODWH>@’2127
RYHUWLJKWHQWKHODJVFUHZV>$@
2B-4
1/2 in (13mm)
Socket Wrench
(Not Included)
Note: Do not use a drill to tighten the
lag screws. Only use a socket wrench.
A2
2B-3
8VHWKHKDPPHUWRNQRFNDQFKRUV>$@LQWRWKHZDOO%HVXUHWKH
DQFKRUV>$@DUHVHDWHGXVKZLWKWKHFRQFUHWHVXUIDFH
A1
01
Hammer
(Not Included)
Level
(Not Included)
02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40

Step 3 Secure the TV onto the Wall Plate
HEAVY! You may need
assistance with this step.
Gently Push
Locking
Caution: to avoid potential injury and person property damage, two people should
assist in removing the TV from the mount.
1. Verify that all cables are disconnected from the back of the TV and the TV is
unplugged from wall.
2. While gently applying pressure to the front of the TV towards the wall, pull down on
the safety straps until they are full disengaged.
3. While keeping the straps in the disengaged position, move the bottom of the TV
DZD\IURPWKHZDOODQGOLIWWKH79RWKHZDOOSODWH
To Hang TV onto the Wall Plate
+DQJWKH79ZLWKEUDFNHWV>@DQG>@RQWRWKHZDOOSODWH
2. Gently press the bottom of the TV towards the wall until you hear the safety locks
“click” into place on both sides of the mount.
R
02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40

1. Use tension knobs on the sides of the TV Brackets to allow adjustment of
the TV to desired position.
2. After making any adjustments, always re-tighten the tension knobs to
hold TV in place and avoid unwanted movement.
Step 4 Adjustment
K
Please do not over-tighten
or over-loosen the knobs.
CAUTION!
Tilt Adjustment
13/64 in (5mm)
Allen Key
Supplied Hardware for Step 4
x1
13/64 in (5mm)
Allen Key
02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40

Gabarit VESA minimal: 200mmx100mm/8 poucex4 pouce
Maximum:400mm/
16 pouce
Maximum: 600mm/
24 pouce
PPSRXFH
PPSRXFH
PPSRXFH
PPSRXFH
Veuillez lire attentivement toutes les instructions avant de tenter l'installation. Si
les instructions ne vous semblent pas claires ou si vous avez des questions, veuillez contacter
notre service d'assistance technique au (877) 419-7832 ou notre service clientèle à l'adresse
ATTENTION: L'utilisation avec des produits plus lourds que les poids maximums indiqués peut
entraîner une instabilité et des blessures possibles.
• 1XWLOLVH]SDVFHSURGXLW£GHVQVTXLQHVRQWSDVH[SOLFLWHPHQWVS‹FL‹HVGDQVFHPDQXHO
Ne dépassez pas la capacité de charge. Nous ne sommes pas responsables des dommages
ou blessures causés par un montage incorrect, un assemblage incorrect ou une utilisation
inappropriée.
• Ce produit est conçu pour être utilisé dans les murs à ossature de bois et les murs en béton
massif. - NE PAS installer dans une cloison sèche seule.
• Le mur doit être capable de supporter quatre fois le poids du téléviseur et du support
combinés.
• Utilisez ce système de montage uniquement pour l'usage auquel il est destiné, tel que décrit
dans ces instructions. N'utilisez pas d'accessoires non recommandés par le fabricant.
• Ne pas utiliser à l'extérieur.
• Acheminez correctement les cordons et les câbles pour éviter tout dommage mécanique.
• SAUVEGARDER CES INSTRUCTIONS.
Si ce support n'est PAS compatible, veuillez contacter notre ligne d'assistance
technique au (877) 419-7832 ou notre service clientèle à l'adresse
[email protected] pour trouver un support compatible.
NE PAS dépasser le poids maximum indiqué. Ce support TV
est destinée à être utilisé uniquement dans la limite des
poids maximums indiqués. L'utilisation de produits plus
lourds que les poids maximums indiqués peuvent entraîner
une défaillance du support TV et de ses accessoires, et
provoquer des dommages et/ou des blessures.
Si votre téléviseur pèse
plus lourd, n'utilisez pas
ce produit.
115lbs/
52.16kg
AVERTISSEMENT
Restrictions de poids
Consignes de sécurité importantes
Si le gabarit VESA de votre téléviseur mesure plus de 600x400mm/24x16 pouce ou
moins de 200x100mm/8x4 pouce, ce support de téléviseur N'EST PAS compatible.
02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40

Remarque: Les entretoises
sont présentées en taille réelle.
Entretoises
Rondelle
AVERTISSEMENT
&HSURGXLWFRQWLHQWGHVSHWLWVREMHWVVXVFHSWLEOHVGHSU‹VHQWHUXQULVTXHG‹WRXH-
ment en cas d'ingestion.
$YDQWGHFRPPHQFHUODVVHPEODJHY‹ULH]TXHWRXWHVOHVSL«FHVVRQWLQFOXVHVHWHQERQ‹WDW
N'utilisez pas de pièces endommagées ou défectueuses. Si vous avez besoin de pièces de
rechange, veuillez contacter notre ligne d'assistance technique au
(877) 419-7832 ou notre service clientèle à l'adresse [email protected].
• le matériel inclus dans cet ensemble ne sera pas utilisé en totalité.
Si vous n'êtes pas sûr
de la construction du
mur, veuillez contacter
notre ligne d'assis-
tance technique au
(877) 419-7832 ou
notre service clientèle
à l'adresse
Mur en béton massif
ATTENTION
NE PAS
installer dans
une cloison
sèche seule Montants en bois
(avec cloison sèche)
Support TV droit
x1
02
Soporte para
TV derecho
x1
03
Détecteur
de goujons
Mètre ruban Crayon Foreuse Niveau
7/32 pouce (5.5mm)
Foret à bois
1/2 pouce (13mm)
Clé à douille
Tournevis
Phillips
3/8 pouce (10mm)
Foret à béton
Marteau-pi-
queur
Ailette
(Nécessaire pour les installations en
Outils nécessaires (non inclus)
x4
B1
M4/M5
x4
B2
M6/M8
L2.5mm
x8
F1
L10mm
x4
F2
L22mm
x4
F3
02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40

/RQJXHXUGHODERXORQ9‹ULH]TXHOHOHWDJHHVWFRUUHFWHPHQWHQJDJ‹DYHF
les boulons ou la combinaison boulons/entretoises. Nous recommandons un
HQJDJHPHQWGXOHWDJHVXUDXPRLQVWRXUV
- Trop court, le téléviseur ne sera pas maintenu.
- Trop long, le téléviseur sera endommagé.
Remarque : Ne serrez pas trop les boulons de téléviseur pour ne pas l'en-
dommager.
Une seule taille de boulon convient à votre
téléviseur.
Étape 1
M6 M8M4
Trop court
Correct
Trop long
>8QHVHXOHWDLOOHGHERXORQFRQYLHQW£YRWUHW‹O‹YLVHXU@
Boulons de téléviseur
Remarque: Les boulons sont représentés en taille réelle
M4
M6
M8
M4x30mm
x4
C2
M4x12mm
x4
C1
M6x15mm
x4
D1
M8x15mm
x4
E1
M8x35mm
x4
E2
M8x50mm
x4
E3
M6x35mm
x4
D2
OU OU
02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40

ATTENTION: Lorsque vous
[H]OHVVXSSRUWV79£ODUUL«UHGX
téléviseur, assurez-vous que les
«FKHVYHUVOHKDXWVRQWGLULJ‹HV
vers le haut du téléviseur et
qu'elles sont également centrées
sur l'arrière du téléviseur.
EUILLEZ NOTER: Les
emplacements des trous de
boulon sur votre téléviseur
peuvent varier en fonction du
design du fabricant du téléviseur.
Nous représentons seulement les
emplacements possibles des
trous des boulon.
03 02
Lors de l'utilisation des entretoises, il est important de noter qu'elles
peuvent être utilisées sur plusieurs couches (c'est-à-dire empilées). Si vous rencontrez
GHVGLFXOW‹VSRXUFRPSUHQGUHFRPPHQWLQVWDOOHUOHVERXORQVRXOHVHQWUHWRLVHVGX
téléviseur, veuillez contacter notre service d'assistance technique au (877) 419-7832
ou notre service clientèle à l'adresse [email protected].
Bump
Voir option C Câbles
Voir option D Trous encastrés
Voir option E
Entretoises
-
F1+F1 F1+F2 F1+F3F1+F1+F2 F1+F1+F3 F2+F3 F1+F2+F3 F1+F1+F2+F3
Téléviseur
incurvée
Voir option B
03
02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40

Option A (pour un téléviseur à dos plat)
Option B (pour un téléviseur à dos arrondi)
03
02
C2/D2/E2/E3
B1/B2
F1/F2/F3
03
02
Tournevis Phillips
(Non inclus)
REMARQUE : /D«FKHYHUVOHKDXW
doit être dirigée vers le haut du
téléviseur.
(Au besoin)
C1/D1/E1
B1/B2
F1
Reportez-vous aux instructions
d'entretoise de la page 18, si
nécessaire.
Reportez-vous aux instructions
d'entretoise de la page 18, si
nécessaire.
/DKDXWHXUGHVHQWUHWRLVHVGRLW›WUHVXVDQWHSRXU‹YLWHUTXHODFRXUEH£ODUUL«UHGX
téléviseur n'interfère avec la plaque de montage.
REMARQUE : /D«FKHYHUVOHKDXW
doit être dirigée vers le haut du
téléviseur.
N
e
p
a
s
t
r
o
p
s
e
r
r
e
r
N
e
p
a
s
t
r
o
p
s
e
r
r
e
r
02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40

/HVHQWUHWRLVHVGRLYHQW›WUHVXVDPPHQWJUDQGHVSRXU
que les supports de télévision soient alignés (PAS
D'ÉCART) sur la bosse.
Option C (pour un téléviseur avec une surépais-
seur)
Option D (pour téléviseur avec interférence du
câble)
03
02
03
Tournevis Phillips
(Non inclus)
Tournevis Phillips
(Non inclus)
Pour éviter les interférences entre les câbles, utilisez les
HQWUHWRLVHV>)@>)@HW>)@SRXUFU‹HUXQHVSDFH
supplémentaire entre le téléviseur et les supports TV.
F1/F2/F3 B1/B2
C2/D2/E2/E3
Reportez-vous aux instructions
d'entretoise de la page 18, si
nécessaire.
Reportez-vous aux instructions
d'entretoise de la page 18, si
nécessaire.
C2/D2/E2/E3
B1/B2
F1/F2/F3
REMARQUE : /D«FKH
vers le haut doit être
dirigée vers le haut du
téléviseur.
N
e
p
a
s
t
r
o
p
s
e
r
r
e
r
N
e
p
a
s
t
r
o
p
s
e
r
r
e
r
02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40
Table of contents
Languages:
Other ErgoAV TV Mount manuals

ErgoAV
ErgoAV ERDHM2-01B User manual

ErgoAV
ErgoAV ERMCM1-01B User manual

ErgoAV
ErgoAV ERMTM2-01B User manual

ErgoAV
ErgoAV ERTSM2-01B User manual

ErgoAV
ErgoAV ERTSS2-01B User manual

ErgoAV
ErgoAV ERMTM1-01B User manual

ErgoAV
ErgoAV ERMTS1-01B User manual

ErgoAV
ErgoAV ERMMS1 -01 B User manual

ErgoAV
ErgoAV ERMTM2-01B User manual

ErgoAV
ErgoAV ERDHM1-01B User manual
Popular TV Mount manuals by other brands

Sanus
Sanus VisionMount VLF210 installation instructions

Mounting Dream
Mounting Dream MD2431-MX-03 Installation instruction

Forging Mount
Forging Mount HY9395-B instruction manual

Sony
Sony NUA-BK30 Instructions for use

PEERLESS
PEERLESS SP 850 and assembly Installation and assembly manual

Dynex
Dynex DX-DRTVL103 user manual